UG_NX8.0快捷键设置和命令集1

UG_NX8.0快捷键设置和命令集1 UG NX8.0快捷键设置和命令集 查看快捷键和设置快捷键,全局快捷及常用快捷键键附于文后: 1、依次选择“工具>定制”,得到以下界面: 2、然后点“键盘”，得到以下界面，此时即可设置快捷键,若要查看已存在的快捷键，则点 击右下角“报告”按钮即可。 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel 附:全局快捷键 Ctrl+N UG_FILE_NEW 文件(F)_新建(N)... 全局 Ctrl+O UG_FILE_OPEN 文件(F)_打开(O)... 全局 Ctrl+S UG_FILE_SAVE_PART 文件(F)_保存(S) 全局 Ctrl+Shift+A UG_FILE_SAVE_AS 文件(F)_另存为(A)... 全局 Ctrl+P UG_FILE_PLOT 文件(F)_绘图(L)... 全局 Ctrl+G UG_FILE_RUN_GRIP 文件(F)_执行(T)_Grip... 全局 Ctrl+Shift+G UG_FILE_RUN_GRIP_DEBUG 文件(F)_执行(T)_调试全局 Grip(D)... Ctrl+U UG_FILE_RUN_UFUN 文件(F)_执行全局 (T)_NX_Open... Ctrl+Q UG_DIRECT_SKETCH_FINISH 文件(F)_完成草图(K) 应用 模块 Q 应用 模块 Ctrl+Z UG_EDIT_UNDO 编辑(E)_撤消列 表 关于同志近三年现实表现材料材料类招标技术评分表图表与交易pdf视力表打印pdf用图表说话 pdf (U)_1进入全局 “建模” Ctrl+Y UG_EDIT_REDO 编辑(E)_重做(R) 全局 Ctrl+X UG_EDIT_CUT 编辑(E)_剪切(T) 全局 Ctrl+C UG_EDIT_COPY 编辑(E)_复制(C) 全局 Ctrl+V UG_EDIT_PASTE 编辑(E)_粘贴(P) 全局 Ctrl+D UG_EDIT_DELETE 编辑(E)_删除(D)... 全局 Delete 全局 Shift+F UG_SEL_FEATURE_PRIORITY 编辑(E)_选择(L)_最高选择优全局 先级_特征(F) Shift+G UG_SEL_FACE_PRIORITY 编辑(E)_选择(L)_最高选择优全局 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel 先级_面(A) Shift+B UG_SEL_BODY_PRIORITY 编辑(E)_选择(L)_最高选择优全局 先级_体(B) Shift+E UG_SEL_EDGE_PRIORITY 编辑(E)_选择(L)_最高选择优全局 先级_边(E) Shift+C UG_SEL_COMPONENT_PRIORITY 编辑(E)_选择(L)_最高选择优全局 先级_组件(C) Ctrl+A UG_SEL_SELECT_ALL 编辑(E)_选择(L)_全选(A) 全局 Ctrl+J UG_EDIT_OBJECT_DISPLAY 编辑(E)_对象显示(J)... 全局 Ctrl+W UG_EDIT_MD_SHOWHIDE_ALL 编辑(E)_显示和隐藏(H)_显全局 示和隐藏(O)... Ctrl+Shift+I UG_EDIT_ONE_PICK_HIDE 编辑(E)_显示和隐藏(H)_立全局 即隐藏(M)... Ctrl+B UG_EDIT_BLANK_SELECTED 编辑(E)_显示和隐藏(H)_隐全局 藏(H)... Ctrl+Shift+K UG_EDIT_UNBLANK_SELECTED 编辑(E)_显示和隐藏(H)_显全局 示(S)... Ctrl+Shift+U UG_EDIT_UNBLANK_ALL_OF_PART 编辑(E)_显示和隐藏(H)_全全局 部显示(A) Ctrl+Shift+B UG_EDIT_REVERSE_BLANK_ALL 编辑(E)_显示和隐藏(H)_反全局 转显示和隐藏(I) Ctrl+T UG_EDIT_MOVE_OBJECT 编辑(E)_移动对象(O)... 全局 T UG_SKETCH_QUICK_TRIM 编辑(E)_草图曲线(K)..._快速应用修剪(Q)... 模块 E UG_SKETCH_QUICK_EXTEND 编辑(E)_草图曲线(K)..._快速应用延伸(X)... 模块 Ctrl+F UG_VIEW_FIT 视图(V)_操作(O)_适合窗口全局 (F) a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel Ctrl+Shift+Z UG_VIEW_ZOOM 视图(V)_操作(O)_缩放(Z)... 全局 Ctrl+R UG_VIEW_ROTATE 视图(V)_操作(O)_旋转(R)... 全局 Ctrl+H UG_VIEW_SECTIONING 视图(V)_截面(S)_编辑工作全局 截面(C)... Ctrl+Shift+H UG_VIEW_HIGH_QUALITY_IMAGE 视图(V)_可视化(V)_高质量全局 图像(H)... Ctrl+Shift+N UG_LAYOUT_NEW 视图(V)_布局(L)_新建(N)... 全局 Ctrl+Shift+O UG_LAYOUT_OPEN 视图(V)_布局(L)_打开(O)... 全局 Ctrl+Shift+F UG_LAYOUT_FIT_ALL_VIEWS 视图(V)_布局(L)_适合所有视全局 图(F) Ctrl+Shift+S UG_VIEW_INFO_WINDOW 视图(V)_信息窗口(I) 全局 F3 UG_VIEW_CURRENT_DIALOG 视图(V)_当前对话框(C) 全局 Ctrl+3 UG_VIEW_VISUAL_PLM_UI 视图(V)_HD3D工具UI 全局 Alt+Enter UG_VIEW_FULL_SCREEN_MODE 视图(V)_全屏(F) 全局 Shift+F8 UG_SKETCH_ORIENT_VIEW_TO_SKETCH 视图(V)_定向视图到草图(K) 应用 模块 Ctrl+F8 UG_VIEW_RESET_ORIENTATION 视图(V)_重置方位(E) 全局 Z UG_SKETCH_PROFILE 插入(S)_草图曲线(S)_轮廓应用(O)... 模块 L UG_SKETCH_LINE 插入(S)_草图曲线(S)_直线应用(L)... 模块 A UG_SKETCH_ARC 插入(S)_草图曲线(S)_圆弧应用(A)... 模块 O UG_SKETCH_CIRCLE 插入(S)_草图曲线(S)_圆应用(C)... 模块 F UG_SKETCH_FILLET 插入(S)_草图曲线(S)_圆角应用(F)... a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel 模块 R UG_SKETCH_RECTANGLE 插入(S)_草图曲线(S)_矩形应用(R)... 模块 P UG_SKETCH_POLYGON 插入(S)_草图曲线(S)_多边形应用(Y)... 模块 S UG_SKETCH_STUDIO_SPLINE 插入(S)_草图曲线(S)_艺术样应用条(D)... 模块 D UG_SKETCH_INFER_DIM 插入(S)_草图约束(K)_尺寸应用(D)_自动判断(I)... 模块 C UG_SKETCH_CONSTRAINTS 插入(S)_草图约束(K)_约束应用(T)... 模块 X UG_MODELING_EXTRUDED_FEATURE 插入(S)_ 设计 领导形象设计圆作业设计ao工艺污水处理厂设计附属工程施工组织设计清扫机器人结构设计 特征(E)_拉伸应用(E)... 模块 Ctrl+4 UG_MODELING_FF_SURF4P 插入(S)_曲面(R)_四点曲面应用(F)... 模块 N UG_MODELING_FF_STUSRF_NXN 插入(S)_网格曲面(M)_艺术应用曲面(U)... 模块 V UG_MODELING_VSWEEP_FEATURE 插入(S)_扫掠(W)_变化扫掠应用(V)... 模块 Ctrl+L UG_LAYER_SETTINGS 格式 pdf格式笔记格式下载页码格式下载公文格式下载简报格式下载 (R)_图层设置(S)... 全局 Ctrl+Shift+V UG_LAYER_VIEW 格式(R)_视图中可见图层全局 (V)... W UG_WCS_DISPLAY 格式(R)_WCS_显示(P) 全局 Ctrl+E UG_INSERT_DLEXPRESSION 工具(T)_表达式(X)... 全局 Alt+F8 UG_JOURNAL_PLAY 工具(T)_操作记录(J)_播放全局 (P)... Alt+F11 UG_JOURNAL_EDIT 工具(T)_操作记录(J)_编辑全局 (E)... a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel Ctrl+Shift+R UG_MACRO_RECORD 工具(T)_宏(R)_开始录制全局 (R)... Ctrl+Shift+P UG_MACRO_PLAYBACK 工具(T)_宏(R)_回放(P)... 全局 Alt+F5 UG_MOVIE_RECORD 工具(T)_电影(E)_录制(R)... 全局 Alt+F6 UG_MOVIE_PAUSE 工具(T)_电影(E)_暂停(P) 全局 Alt+F7 UG_MOVIE_STOP 工具(T)_电影(E)_停止(S) 全局 Ctrl+1 UG_TOOLS_CUSTOMIZE 工具(T)_定制(Z)... 全局 F4 UG_TOOLS_REPEAT_LAST_COMMAND_0 工具(T)_重复命令(R)_1定制 全局 Ctrl+I UG_INFO_OBJECT 信息(I)_对象(O)... 全局 Ctrl+Shift+C UG_INFO_MB_SHOW_GRAPHS 分析 定性数据统计分析pdf销售业绩分析模板建筑结构震害分析销售进度分析表京东商城竞争战略分析 (L)_曲线(C)_刷新曲率图全局 (R) Ctrl+Shift+J UG_PREFERENCES_OBJECT 首选项(P)_对象(O)... 全局 Ctrl+Shift+T UG_PREFERENCES_SELECTION 首选项(P)_选择(E)... 全局 Ctrl+M UG_APP_MODELING 应用(N)_建模(M)... 全局 M 全局 Ctrl+Alt+S UG_APP_STUDIO 应用(N)_外观造型设计(T)... 全局 Ctrl+Shift+D UG_APP_DRAFTING 应用(N)_制图(D)... 全局 Ctrl+Alt+M UG_APP_MANUFACTURING 应用(N)_加工(N)... 全局 Ctrl+Alt+N UG_APP_SBSM 应用(N)_钣金(H)_NX钣金全局 (H)... Ctrl+Alt+P UG_APP_FLEX_PCB 应用(N)_挠性印制电路设计全局 (X)... F1 UG_HELP_ON_CONTEXT 帮助(H)_关联(C)... 全局 Ctrl+Q UG_DIRECT_SKETCH_FINISH 完成草图(K) 应用 模块 Q 应用a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel 模块 Shift+F8 UG_SKETCH_ORIENT_VIEW_TO_SKETCH 定向视图到草图(K) 应用 模块 F5 UG_VIEW_POPUP_REFRESH 刷新(S) 全局 F6 UG_VIEW_POPUP_ZOOM 缩放(Z) 全局 F7 UG_VIEW_POPUP_ROTATE 旋转(O) 全局 Home UG_VIEW_POPUP_ORIENT_TFRTRI 定向视图(R)_正二测视图(T) 全局 End UG_VIEW_POPUP_ORIENT_TFRISO 定向视图(R)_正等测视图(I) 全局 Ctrl+Alt+T UG_VIEW_POPUP_ORIENT_TOP 定向视图(R)_俯视图(O) 全局 Ctrl+Alt+F UG_VIEW_POPUP_ORIENT_FRONT 定向视图(R)_前视图(F) 全局 Ctrl+Alt+R UG_VIEW_POPUP_ORIENT_RIGHT 定向视图(R)_右视图(R) 全局 Ctrl+Alt+L UG_VIEW_POPUP_ORIENT_LEFT 定向视图(R)_左视图(L) 全局 F8 UG_VIEW_POPUP_SNAP_VIEW 捕捉视图(N) 全局 Ctrl+V UG_EDIT_PASTE 粘贴(P) 全局 F4 UG_TOOLS_REPEAT_LAST_COMMAND_0 重复命令(R)_1定制 全局 Ctrl+Shift+Home UG_MODELING_FEATURE_REPLAY_ 工具(T)_更新(U)_将第一个应用特征设为当前的(F) 模块 MAKE_FIRST_CURRENT Ctrl+Shift+Left_Arrow UG_MODELING_FEATURE_REPLAY_ 工具(T)_更新(U)_将上一个应用特征设为当前的(P) 模块 MAKE_PREVIOUS_CURRENT Ctrl+Shift+Right_Arrow UG_MODELING_FEATURE_REPLAY_ 工具(T)_更新(U)_将下一个应用特征设为当前的(N) 模块 MAKE_NEXT_CURRENT Ctrl+Shift+End UG_MODELING_FEATURE_REPLAY_ 工具(T)_更新(U)_将最后一应用个特征设为当前的(L) 模块 MAKE_LAST_CURRENT a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel 附:常用快捷键 S 绘制草图 X 拉伸 R 回转体 T 修剪的片体 A 装配 V 变化的扫略 N 互换显示与隐藏，反向隐藏所有的， Ctrl+Shift+K 取消所以隐藏部件 Ctrl+Shift+D 制图，工程图， Shift+MB2 平移 Ctrl+MB2 缩放 Ctrl+I 显示信息 Ctrl+B 隐藏 Ctrl+T 变换(包含【平移】 【旋转】 【矩形阵列】…) Ctrl+L 图层设置 Ctrl+M 进入建模模块 Ctrl+Q 完成草图后退出 Ctrl+F 适合窗口 Ctrl+W 基础环境 Ctrl+J 对象显示 Ctrl+D 删除 Ctrl+I 对象，显示选中项目的信息， End 正等轴测图 Home 正二测视图 F6 缩放 F7 旋转，与MB2功能等同， F8 快速直身并捕捉视图 E Extract 抽取几何体 J 编辑显示 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel B 隐藏 U 取消所以隐藏的 Z 注塑模向导 Q 最合适视图 G 缝合 特定模块下的快捷键 建模模块中 X 约束 D 自动判断的尺寸 A 圆弧 T 快速修剪 O 偏移 Z 配置文件，包括直线 圆弧…， F 圆角 R 矩形 I 求交 L 直线 E 延伸 C 圆 M 镜像 P 点 S 派生直线 K 自动转换的参考 实体建模模块中 H 孔 P 基准平面 O 实例特征 F 边倒圆 D 拔模角 U 求和 I 求交 M 求差 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel C 倒斜角 Alt+S 抽壳 Alt+C 修剪体 Alt+D 分割体 devide Alt+O 偏置面 制图，2D图，模块中 V 基本视图 C 剖视图 功能快捷键 1 修剪和延伸 2 分割面 3 简化体 4 扩大 5 6 编辑曲线长度 7 修剪曲线 8 分割曲线 9 投影曲线 0 相交曲线 F1 帮助文件 F2 距离分析 F3 塑模部件验证 F4 信息 F5 刷新 F6 缩放 F7 旋转 F8 快速直身 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel