中英文对照 石油化工行业制造标准清单

中英文对照 石油化工行业制造 标准 excel标准偏差excel标准偏差函数exl标准差函数国标检验抽样标准表免费下载红头文件格式标准下载 清单 1) Please find attached the list of international codes and standards to be applied for the design and manufacturing of the whole supply (doc n. 0002-00-00-000-B-G-1-43-002) 随函附上全部供应材料 设计 领导形象设计圆作业设计ao工艺污水处理厂设计附属工程施工组织设计清扫机器人结构设计 和制造中应用的国际 规范 编程规范下载gsp规范下载钢格栅规范下载警徽规范下载建设厅规范下载 和标准一览表(文件号 0002-00-00-000-B-G-1-43-002)。 Please kindly confirm compliance; moreover, please confirm that it is already included in your quotation or update accordingly. 请确认符合情况，此外，请确认其已相应包含在贵方报价或更新文件中。 2) ASTM / ASME standard Materials with proper certifications (refer to attached material certificate EN 10204 3.1 samples) shall be provided for the whole supply materials; equivalent Chinese standard material are not accepted by our Client (except the ones listed in the attached doc n. 0002-00-00-000-B-G-1-43-002 section 3). 应为全部材料提供ASTM/ ASME标准材料和适当的认证(参考随附的材料证书EN 10204 3.1)，我们的客 户不接受同等的中国标准材料(随附文件号0002-00-00-000-B-G-1-43-002第3节列出的材料除外)。 Please kindly confirm compliance; moreover, please confirm that it is already included in your quotation or update accordingly. 请确认符合情况，此外，请确认其已相应包含在贵方报价或更新文件中。 (See attached file: 0002-00-00-000-B-G-1-43-002_D.doc) (See attached file: material test certificates samples. rar) (参考随附文件:0002-00-00-000-B-G-1-43-002_D.doc)(参考随附文件:材料测试证书样本.rar) LIST OF APPLICABLE INTERNATIONAL / NATIONAL CODES AND STANDARDS 适用的国际/国家规范和标准一览表 INDEX(检索) Page(页码) 1. International Standards (Foreign Standards internationally acknowledged) 3 1. 国际标准(国际公认的国外标准) 3 2. National Standards of other countries referenced to International Standards and acknowledge by Cuban Authorities 41 2.其他国家参照国际标准并由古巴当局认可的国家标准 41 3. National Standards of other countries not referenced to International Standards and not acknowledge by Cuban Authorities (Chinese standard) 48 3.其他国家未参照国际标准且未被古巴当局认可的国家标准(中国标准) 48 1. International Standards (Foreign Standards internationally acknowledged) 1. 国际标准(国际公认的国外标准) AASHTO - American Association of State Highway and Transportation Officials AASHTO—美国国家公路与运输协会 GDPS-4-M Guide for Design of Pavement Structures 路面结构设计指南 AASHTO Bridge Design Specifications 桥梁设计规范 M145 Classification System for Soil 土壤分类系统 M226 Viscosity Graded Asphalt Cement 粘度级沥青胶合剂 T166 Bulk Specific Gravity of Compacted Bituminous Mixtures 压实沥青混合料毛体积比重 ACI - American Concrete Institute ACI-美国混凝土学会 117 Standard Specifications for Tolerances for Concrete Construction and Materials 混凝土施工与材料公差的标准规格 207.1R Mass Concrete 大体积混凝土 211.1 Standard Practice for Selecting Proportions for Normal, Heavyweights, and Mass Concrete 常规、重型和大体积混凝土选择比例标准规程 223 Standard Practice for the Use of Shrinkage-Compensating Concrete 收缩补偿混凝土使用标准规程 301 Specifications for Structural Concrete for Buildings 建筑用结构混凝土规格 302.1R Guide for Concrete floor and slab constructions 混凝土地面和平板结构指南 Guide for the use of Pre-placed Aggregate Concrete for Structural and Mass 304.1R Concrete Applications 结构和大体积混凝土应用预填骨料混凝土使用指南 304.2R Placing concrete by pumping methods 用泵送 方法 快递客服问题件处理详细方法山木方法pdf计算方法pdf华与华方法下载八字理论方法下载 浇筑混凝土 Heavyweight Concrete: Measuring, Mixing, Transporting, and Placing 304.3R 重混凝土:计量、搅拌、运输及配售 Placing Concrete with Belt Conveyors 304.4R 配售混凝土带式输送机 Batching, Mixing, and Job Control of Lightweight Concrete 304.5R 轻质混凝土配料、混合及作业控制 Guide for the Use of Volumetric–Measuring and Continuous–Mixing 304.6R Concrete Equipment 容积计量和连续搅拌混凝土设备使用指南 304R Guide for Measuring, mixing, transporting, and placing concrete 计量、搅拌、运输及配售混凝土指南 305R Hot weather concreting 夏季浇筑混凝土 306R Cold weather concreting 冬季浇筑混凝土 308 Standard practice for curing concrete 养护混凝土标准规程 309R Guide for Consolidation of Concrete 318 Building Code Requirements for Reinforced Concrete 钢筋混凝土建筑规范要求 Formwork for Concrete 347 混凝土用模板 350 Standard Engineering Practice for Environmental Structures 环境结构标准工程规程 439.3R Mechanical Connections of Reinforcing Bars 配筋机械连接 506.2 Specification for Shotcrete 喷浆混凝土规范 SP-66 ACI Detailing Manual 美国混凝土学会详细手册 AI - Asphalt Institute AI-美国沥青协会 MS-2 Design Method for Asphalt Concrete and other Hot-Mix Types 沥青混凝土及其他热拌类型设计方法 MS-4 Asphalt Handbook 沥青手册 SS-1 Model Construction Specifications for Asphalt Concrete and Other Plant-Mix Types 沥青混凝土及其他厂拌类型模型建构规范 SS-2 Specifications for Pavings and Industrial Asphalt 铺面材料和工业沥青规范 AISC - American Institute of Steel Construction AISC-美国钢结构学会 303 Code of Standard Practice for Steel Buildings and Bridges 钢结构建筑和桥梁标准规程规范 348 Specification for Structural Joints using High strength bolts 使用高强度螺栓的结构缝规范 360 Specification for Structural Steel Buildings 钢结构建筑规范 AISI - American Iron and Steel Institute AISI-美国钢铁学会 4140 Alloy Steel Plates 合金钢板 ANSI - American International Standards Institute ANSI-美国国家标准学会 ANSI/FCI 70-2 Control Valves Seat Leakage 控制阀门座泄露 ANSI/ISA MC-96.1 Temperature Measurement Thermocouples 温度测量热电偶 ANSI/TIA-568-C.1 General Requirements 通用要求 ANSI/TIA-568-C.3 Optical Fibre Cabling Component Standard 光纤布线组件标准 ANSI-J-STD-607-A Grounding and Bonding Requirements for Telecommunications in Commercial Buildings 商用建筑物的电信接地和连接安全性要求 ANSI/NSC Z16.5 Occupational Safety and Health Incident Surveillance - Now Copyrighted by NSC 职业安全及健康事件监控——现版权归美国安全委员会所有 ANSI Z400.1/Z129.1-2010 Hazardous Workplace Chemicals – Hazard Evaluation and Safety Data Sheet and Precautionary Labeling Preparation 工作场所危险化学品–危害评估和安全数据表和预防标签准备标准 API - American Petroleum Institute API-美国石油学会 API 2C VI Ed. Specification for Offshore Pedestal Mounted Cranes API 2C第6版 近岸支座式起重机规范 API 5L IV Ed. Specification for Line Pipe API 5L第4版 线管规范 API 6D XX Ed. Specification for Pipeline Valves (Gate, Plug, Ball and Check Valves) API 6D第20版 管道阀门(闸阀、插头、球阀和止回阀)规范 API 510 Pressure Vessel Inspection Code: In-Service Inspection, Rating, Repair, and Alteration (Note: only for the existing pressure vessel that will be reused) 压力容器检验规范:运行中检查、评级、修复和改造 (注:仅适用于将重新利用的现有压力容器) API 520 Part 1 - VIII Ed. Sizing, Selection, and Installation of Pressure-relieving Devices in Refineries API 520第1部分-第8版 Part I - Sizing and Selection - EIGHTH EDITION 炼油厂泄压装置的尺寸确定、选择和安装 第1部分—设置和选择—第八版 API RP 520 Part 2 - V Ed. Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries API RP 520第2部分-第5版 Part II—Installation - Fifth Edition 炼油厂泄压装置的尺寸确定、选择和安装 第2部分—安装—第五版 API 521 V Ed. Press. Relieve and Depr. System API 521第5版 泄压和减压系统 API 526 VI Ed. Flanged Steel Pressure Relief Valves API 526第6版 钢制法兰连接泄压阀 API 527 III Ed. Commercial Seat Tightness of Safety Valves with Metal to Metal Seats API 527第3版 带金属与金属连接阀座的安全阀的商业阀座气密性 API 530 VI Ed. Calculation of Heater-tube Thickness in Petroleum Refineries API 530第6版 炼油厂中加热器管厚度的计算 API 537 II Ed. Flares API 537第2版 照明弹 API 560 IV Ed. Fired Heaters for General Refinery Services API 560第4版 炼油厂通用燃料加热器 API 594 VII Ed. Check Valves: Wafer, Wafer-Lug and Double Flanged Type API 594第7版 止回阀:盘式、盘式—凸耳及双法兰式 API 598 IX Ed. Valve Inspection and Testing API 598第9版 阀门检验和测试 API 599 VI Ed. Plug Valve API 599第6版 旋塞阀 API 600 XII Ed. Steel Gate Valves Flanged and Butt Welding Ends API 600第12版 连接钢制闸阀法兰和对焊端部 API 602 IX Ed. Compact Steel Gate Valve API 602第9版 紧凑型钢制闸阀 API 603 VII Ed. Corrosion-resistant, Bolted Bonnet Gate Valves – Flanged and Butt-welding API 603第7版 Ends 耐腐蚀螺栓连接阀盖闸阀,法兰端和焊接端 API 607 VI Ed. Fire Test for Soft-Seated Quarter Turn Valves API 607第6版 软座式直角回转阀的防火试验 API 608 IV Ed. Metal Ball Valves - Flanged and Butt-Welding Ends API 608第4版 金属球阀—法兰端和焊接端 API 609 VII Ed. Butterfly Valves: Double Flanged, Lug and Wafer Type API 609第7版 双法兰连接、凸耳及饼式蝶阀 API 610 X Ed. Centrifugal Pumps for General Refinery Services API 610第10版 炼油厂通用离心泵 API 611 IV Ed. General Purpose Steam Turbine for Refinery Services API 611第4版 炼油操作用一般用途蒸汽透平机 API 612 VI Ed. Special Purpose Steam Turbine for Refinery Services API 612第6版 炼油操作用特殊用途蒸汽透平机 API 613 V Ed. Special Purpose Gear Units API 613第5版 特殊用途齿轮装置 API 614 V Ed. Lubrication, Shaft-sealing and Oil-control Systems and Auxiliaries API 614第5版 润滑、轴密封和控制油系统及辅助设备 API 617 VII Ed. Axial and Centrifugal Compressors and Expander-compressors API 617第7版 轴流和离心压缩机及膨胀机-压缩机 API 618 V Ed. Reciprocating Compressors for Petroleum, Chemical and Gas Industry API 618第5版 Services 石油、化学和气体工业用往复式压缩机 API 619 IV Ed. Rotary-type Positive Displacement Compressors for General Refinery API 619第4版 Services 炼油厂通用旋转式容积式压缩机 API 620 XI Ed. Design and Construction of Large, Welded, Low-Pressure Storage Tanks API 620第11版 大型低压焊接储油罐的设计与施工 API 650 XI Ed. Steel Welded Tanks for Oil Storage API 650第11版 钢制焊接油罐 API 653 Tank Inspection, Repair, Alteration, and Reconstruction (Note: only for the existing tanks that will be reused) 油罐检测、修理、改造和重建 (注:仅适用于将重新利用的现有油罐) API 660 VIII Ed Shell and Tube Heat Exchangers for General Refinery Services API 660第8版. 炼油厂通用管壳式换热器 API 661 VI Ed. Air Cooled Heat Exchangers for General Refinery Services API 661第6版 炼油厂通用空冷式热换器 API 662 Plate Heat Exchangers for General Refinery Service 炼油厂通用板式换热器 API 662 Part 1 - I Ed. Plate and Frame Heat Exchangers API 662第1部分-第1版 板式及框架式换热器 API 662 Part 2 – I Ed. Brazed Aluminium Plate-fin Heat Exchangers API 662第2部分-第1版 钎焊铝板翅式换热器 API 670 IV Ed. Machinery Protection System API 670第4版 机械保护系统 API 671 IV Ed. Special-Purpose Couplings API 671第4版 专用联轴器 API 672 IV Ed. Packaged, Integrally Geared Centrifugal Air Compressors API 672第4版 组装型整体齿轮增速离心式空气压缩机 API 673 II Ed. Centrifugal Fan API 673第2版 离心通风机 API 674 II Ed. Positive Displacement Pumps – Reciprocating API 674第2版 容积式往复泵 API 675 II Ed. Positive Displacement Pumps – Controlled Volume API 675第2版 容积式可控制排量泵 API 676 III Ed. Positive Displacement Pumps – Rotary API 676第3版 容积式转子泵 API 677 III Ed. General-Purpose Gear Units for Petroleum, Chemical and Gas Industry API 677第3版 Services 石油、石化和天然气工业用一般用途齿轮装置 API 681 I Ed. Liquid Ring Vacuum Pumps and Compressors API 681第1版 液环真空泵和压缩机 API 682 III Ed. Pumps—Shaft Sealing Systems for Centrifugal and Rotary Pumps API 682第3版 泵—离心泵转子泵用轴密封系统 API 685 II Ed. Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry API 685第2版 Process Service 石油、石化和天然气工业用无密封式离心泵 API 686 II Ed. Recommended Practices for Machinery Installation and Installation Design API 686第2版 机械设备安装和安装设计建议惯例 API 1104 XX Ed. Welding of Pipelines and Related Facilities API 1104第20版 管道及附件焊接 Computational Pipeline Monitoring API 1130 计算管道监测 Evaluation Methodology for Software Based Leak Detection Systems API 1155 基于管道泄露检测系统软件的评估方法论 API 2000 VI Ed. Venting Atmospheric and Low-pressure Storage Tanks API 2000第6版 排气大气和低压储油罐 API 2218 II Ed. Fireproofing Practices in Petroleum and Petrochemical Processing Plant API 2218第2版 石油和石化加工厂的防火措施 API 2510 VIII Ed. Design and Construction of LPG Installations API 2510第8版 液化石油气设施的设计与施工 API 2510 A II Ed. Fire-Protection Considerations for the Design and Operation of Liquefied API 2510 A第2版 Petroleum Gas (LPG) Storage Facilities 设计和操作液化石油气(LPG)储存设备的防火事项 API 2534 I Ed. Measurement of Liquid Hydrocarbons by Turbine Meter Systems API 2534第1版 涡轮流量计系统测量液态烃 API RP 2A WSD – XXI Ed. Recommended Practice for Planning, Designing and Constructing Fixed API RP 2A WSD第21版 Offshore Platforms - Working Stress Design 海上固定平台规划、设计和建造的推荐作法—工作应力设计法 API RP 2D VI Ed. Operation and Maintenance of Offshore Cranes API RP 2D第6版 海上平台起重机使用与维护 Heat Treatment and Testing of Large Cross Section and Critical Section API RP 6HT Components 大断面和关键部件的热处理和测试 API RP-505 I Ed. Recommended Practice for Classification of Locations for Electrical API RP-505第1版 Installations at Petroleum Facilities Classified as Class I, Zone 0, Zone 1, and Zone 2 以1级、0区、1区和2区分类的石油装置用电气设备位置分类的推荐实 施规程 API RP-535 II Ed. Burners API RP-535第2版 燃烧器 API RP-551 I Ed. Process Measurement Instrumentation API RP-551第1版 过程测量仪表 API RP-552 I Ed. Transmission System API RP-552第1版 传输系统 API RP-553 I Ed. Refinery Control Valves API RP-553第1版 炼油厂控制阀 API RP-554 Part 1 – II Ed. Process Control Systems Part 1—Process Control Systems Functions and API RP-554第1部分-第2版 Functional Specification Development - SECOND EDITION 过程控制系统:第1部分—功能和功能规格发展的过程控制系统—第二 版 API RP-554 Part 2 – I Ed. Process Control Systems— Process Control System Design - First Edition API RP-554第2部分-第1版 过程控制系统—过程控制系统设计—第一版 API RP-554 Part 3 – I Ed. Process Control Systems— Project Execution and Process Control System API RP-554第3部分-第1版 Ownership - First Edition 过程控制系统—项目执行和过程控制系统所有权—第一版 API RP-555 II Ed. Process Analysers (in press) API RP-555第2版 过程分析仪(印刷中) API RP-556 II Ed. Instrumentation & Control System for Fired Heaters and Steam Generation API RP-556第2版 发射热水器和蒸汽发生器的仪表和控制系统 API RP-557 I Ed. Guide to Advanced Control Systems API RP-577第1版 高级控制系统指南 API RP-571 I Ed. Damage Mechanisms Affecting Fixed Equipment in the Refining Industry API RP-571第1版 影响炼油工业中固定设备的损伤机理 API RP-621 III Ed. Reconditioning of Metallic Gate, Globe, and Check Valves API RP-621第3版 金属闸阀、截止阀和止回阀的重新调整 API RP 752 III Ed. Management of Hazards Associated with Location of Process Plant API RP 752第3版 Permanent Buildings 与加工厂永久性建筑位置相关的危险管理 API RP-934-A II Ed. Low Alloy steel Heavy Wall in high Temperature and Pressure for Hydrogen API RP-934-A第2版 Service 应用于高温高压氢工况的低合金钢的厚壁 API TR-934-B II Ed. Low Alloy steel Vanadium modified for Heavy Wall Pressure Vessels API RP-934-B第2版 为厚壁压力容器修改的低合金钢钒 API RP-934-C II Ed. Low Alloy steel Heavy Wall Pressure Vessels for High Pressure service API RP-934-C第2版 Operating at or below 441?C 应用于高温高压工况操作温度不高于441?C的低合金钢厚壁压力容器 API TR-938-C I Ed. Use of Duplex Stainless Steel in the Oil Refinery Industry API TR-938-C第1版 石油提炼工业中双相不锈钢的使用 API RP-939-C I Ed. Guidelines for Avoiding Sulfidation (Sulfidic) Corrosion Failures in Oil API RP-939-C第1版 Refineries 石油炼厂避免硫化腐蚀失效指南 API RP-941 VII Ed. Steel for Hydrogen Service at Elevated Temperature and Pressures in API RP-941第7版 Petroleum Refinery and Petrochemical Plants 炼油厂和石油化工厂高温高压下氢气设备用钢 API RP-945 III Ed. Avoiding Environmental Cracking in Amine Units API RP-945第3版 避免环境因胺元素而分裂 API RP-1102 VII Ed. Steel Pipelines Crossing Railroads and Highways API RP-1102第7版 钢制管道穿越铁路和公路 Recommended Practice for Pressure Testing of Liquid Petroleum Pipelines API RP 1110 液体石油管道压力试验推荐作法 API RP-1111 IV Ed. Design, Construction, Operation, and Maintenance of Offshore Hydrocarbon API RP-1111第4版 Pipelines (Limit State Design) 碳氢化合物海底管道设计、建设、运行和维修(极限状态设计) API RP-2001 VIII Ed. Fire Proofing Practices in Petroleum and Petrochemical Processing Plants API RP-2001第8版 石油和石化加工厂防火作法 API RP-2028 III Ed. Flame Arresters in Piping Systems API RP-2028第3版 管道系统阻火器 API RP-2030 III Ed. Application of Fixed Water Spray Systems for Fire Protection in the API RP-2030第3版 Petroleum Industry 石油工业消防用固定喷水系统的应用 API RP-2210 III Ed. Flame Arresters for Vents of Tanks Storing Petroleum Products API RP-2210第3版 储存石油产品储罐通风口用阻火器 ASCE - American Society of Civil Engineering ASCE-美国土木工程师协会 ASCE 7 Minimum Design Loads for Buildings & other Structures 建筑和其它结构的最小设计载荷 ASCE 15 – 98 Buried Concrete Pipes 地下混凝土管 --- Design Blast Resistant Buildings in petrochemical Plants 石化厂设计防爆建筑 ASHRAE - American Society of Heating, Refrigerating and Air-Conditioning Engineers ASHRAE-美国采暖、制冷与空调工程师学会 --- ASHRAE Handbook ASHRAE手册 ASME - American Society of Mechanical Engineers ASME-美国机械工程师协会 ASME B1.1 Unified inch screw threads 统一英制螺纹 ASME B1.13M Metric Screw Threads 米制螺纹 ASME B1.20.1 Pipe threads, General purpose 通用管螺纹 ASME B16.1 Cast Iron Pipe, Flanges and Flanged Fittings 铸铁管、法兰和法兰配件 ASME B16.3 Malleable Iron Threaded Fittings 可锻铸铁螺纹管件 ASME B16.5 Pipe Flanges and Flanged Fittings 管法兰和法兰管件 ASME B16.10 Face-to-Face and End-to-End Dimensions of Valves 阀门的面对面及端对端尺寸 ASME B16.11 Forged Steel Fittings, Socket-Welding and Threaded 锻钢件、承插焊和螺纹 ASME B16.14 Ferrous Pipe Plugs, Bushings and Locknuts with Pipe Threads 钢铁制管螺塞、衬套和防松螺母 ASME B16.20 Metallic Flat Gaskets for Pipe Flanges 管法兰用金属平垫片 ASME B16.21 Non metallic Flat Gaskets for Pipe Flanges 管法兰用非金属平垫片 ASME B16.25 Butt Welding Ends 对焊端部 ASME B16.34 Valves – Flanged, Threaded and Welding End 法兰,螺纹和焊接端连接的阀门 ASME B16.36 Steel Orifice Flanges 钢孔板法兰 ASME B16.42 Ductile Iron Pipe, Flanges and Flanged Fittings 球墨铸铁管、法兰和法兰管件 ASME B16.47 Large diameter steel flanges 大直径管钢制法兰 ASME B16.48 Steel Line Blanks 空白钢衬 Factory-made, Wrought Steel, Buttwelding Induction Bends for ASME B16.49 Transportation and Distribution Systems 传输和分配系统用工厂预制锻钢对焊感应管弯头 ASME B16.5 Pipe Flanges and Flanged Fittings NPS ? trough 24 管法兰和法兰配件美国标准直管螺纹?槽24 ASME B16.9 Factory-Made Wrought Steel Buttwelding Fittings 工厂制造的锻轧制对焊管配件 ASME B18.2.1 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series) 四角螺栓、六角螺栓、六角重型螺栓、歪头螺栓及六角螺钉、六角重型 螺钉、六角法兰螺钉、裂头螺钉、方头螺钉(英制系列) ASME B18.2.2 Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series) 通用螺母:机械螺丝用螺母、六角螺母、四角螺母、六角法兰螺母、联 接螺母(英制系列) ASME B18.2.3.7M Metric Heavy Hex Structural Bolts 米制重六角形结构螺栓 ASME B18.2.4.6M Metric Heavy Hex Nuts 米制重型六角螺母 ASME B.30.2 Overhead and Gantry Cranes 桥式及门式起重机 ASME B.30.3 Hammerhead Tower Cranes 锤头塔式起重机 ASME B.30.4 Portal, Tower and Pillar Cranes 门式、塔式和柱式起重机 ASME B.30.5 Mobile and Locomotive Cranes 汽车起重机和机车起重机 ASME B.30.6 Derricks 桅杆起重机 ASME B.30.8 Floating Cranes and Floating Derricks 浮式起重机和浮式桅杆起重机 ASME B.30.14 Side Boom Tractors 侧臂式拖拉机 ASME B.30.16 Overhead Hoists 高架悬挂提升机 ASME B.30.22 Articulating Boom Cranes 活节悬臂起重机 ASME B31.1 Power Piping 动力管道 ASME B31.3 Process Piping 工艺管道 APPENDIX P to B31.3 Alternative Rules for Evaluation Stress Range 附录P至B31.3 评价应力范围的替代原则 APPENDIX S to B31.3 Piping System Analysis Example 附录S至B31.3 管道系统分析实例 ASME B31.4 Piping Transportation System for Liquid Hydrocarbons and other Liquids 液态烃和其他液体管线输送系统 ASME B31.8 Gas Transportation and Distribution Piping System 气体输送和分配管道系统 ASME B36.10 Welded and seamless wrought Steel Pipe 焊接和无缝轧制钢管 ASME B36.10M Welded and Seamless Wrought Steel Pipe 焊接和无缝轧制钢管 ASME B36.19M Stainless Steel Pipe 不锈钢管 ASME B73.1 Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process (Not applicable for API service) 化学流程用卧式轴向吸入离心泵技术规范(不适用于API服务) ASME PTC 10 Performance Test Code on Compressors and Exhausters 压缩机和排气动力试验规程 ASME PTC 19.3 Part 3 – Temperature Measurement Instruments and Apparatus 第3部分—温度测量仪器及器具 ASME PTC 2 Definitions and Values Performance Test Codes 定义和数值性能试验规程 ASME PTC 22 Performance Test Code on Gas Turbines 燃气轮机性能试验规程 ASME PTC 4 Performance Test code for Fired Steam Generators 燃煤蒸汽发生器性能试验规程 ASME PTC 6 Performance Test Code on Steam Turbines 汽轮机性能试验规程 ASME Section I Rules for Construction of Power Boilers ASME第1节 动力锅炉施工规则 ASME Section II Materials ASME第2节 材料 ASME Section IX Welding and Brazing Qualifications ASME第9节 焊接和钎焊条件 ASME Section V Non Destructive Examinations ASME第5节 无损检查 ASME Section VIII Div.1 Rules for Construction of Pressure Vessels ASME第8节第1小节 压力容器施工规则 ASME Section VIII Div.2 Rules for Construction of Pressure Vessels (alternative) ASME第8节第2小节 压力容器施工规则(替代) ASME STS 1 Steel Stacks 钢制竖管 thTEMA 9 Edition Standards of the Tubular Exchanger Manufacturers Association TEMA第9版 管式换热器制造商协会标准 ASNT - American Society for Nondestructive Testing (NDT) ASNT-美国无损检测(NDT)学会 Qualification and Certification of Nondestructive Testing Personnel ASNT CP189 无损检测人员技术资格鉴定 ASSE – American Society of Safety Engineers ASSE-美国安全工程师学会 A10.4 Safety Requirements 安全要求 ASTM - American Society for Testing and Materials ASTM-美国试验材料学会 Vol 01.01 Steel-Piping, Tubing, Fittings 01.01卷 钢管、管材、管件 Vol 01.02 Ferrous Castings; Ferroalloys 01.02卷 有色金属铸件;铁合金 Vol 01.03 Steel-Plate, Sheet, Strip, Wire; Stainless Steel Bar 01.03卷 钢板、薄板、长片、线材;不锈钢条棒 Vol 01.04 Steel-Structural, Reinforcing, Pressure Vessel, Railway 01.04卷 钢结构、钢筋、压力容器、铁路 Vol 01.05 Steel-Bars, Forgings, Bearing, Chain, Tool 01.05卷 钢筋、锻件、轴承、链条、工具 Vol 01.06 Coated Steel Products 01.06卷 镀层钢板产品 Vol 02.01 Copper and Copper Alloys 02.01卷 铜和铜合金 Vol 02.02 Aluminum and Magnesium Alloys 02.02卷 铝和镁合金 Vol 02.04 Nonferrous Metals--Nickel, Cobalt, Lead, Tin, Zinc, Cadmium, Precious, 02.04卷 Reactive, Refractory Metals and Alloys; Materials for Thermostats, Electrical Heating and Resistance Contacts, and Connectors 有色金属—镍、钴、铅、锌、镉、精致活性难溶金属和合金;温控器、 电热和电阻触点材料、连接器 Vol 02.05 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products 02.05卷 金属和无机涂料;金属粉末和金属粉末产品 Vol.03.01 Metals - Mechanical Testing; Elevated and Low-Temperature Tests; 03.01卷 Metallography 金属—机械测试;高温和低温试验;金相 Vol 04.01 Cement; Lime; Gypsum 04.01卷 水泥;石灰;石膏 Vol 04.02 Concrete and Aggregates 04.02卷 混凝土和骨料 Vol 04.03 Road and Paving Materials 04.03卷 道路及铺路材料 Vol 04.04 Roofing and Waterproofing 04.04卷 屋面和防水 Vol 04.05 Chemical-Resistant Nonmetallic Materials; Vitrified Clay Pipe; Concrete 04.05卷 Pipe; Fiber-Reinforced Cement Products; Mortars and Grouts; Masonry; Precast Concrete 耐化学腐蚀的非金属材料;陶管;混凝土管;纤维增强水泥制品;灰浆 和灌浆;砌筑;预制混凝土 Vol 04.06 Thermal Insulation; Environmental Acoustics 04.06卷 隔热;环境声学 Vol 04.07 Building Seals and Sealants; Fire Standards; Dimension Stone 04.07卷 建筑密封和密封剂;消防标准;块石 Vol 04.08 Soil and Rock (I): D 420 - D 5611 04.08卷 土壤和岩石(I): D 420 - D 5611 Vol 04.09 Soil and Rock (II): D 5714 - latest 04.09卷 土壤和岩石(II): D 5714—最新 Vol 04.10 Wood 04.10卷 木材 Vol 04.11 Building Constructions (I): E 72 - E 1670 04.11卷 建筑结构(I): E 72 - E 1670 Vol 04.12 Building Constructions (II): E 1671 - latest; Property Management Systems; 04.12卷 Technology and Underground Utilities 建筑结构(II): E 1671—最新;资产管理系统;技术和地下公用设施 Vol 04.13 Geosynthetics 04.13卷 土工合成 Section 5 of ASTM ―Petroleum Products, Lubricants and fossil fuels‖ ASTM第5节 GENERAL REMARK: All the section 5 of ASTM will be used as reference only. Process Job Design Specifications and Licensors requirements will prevail in case of conflict (e.g. specifications of products, etc). ―石油产品、润滑剂和化石燃料‖ 一般说明: ASTM第5节所有内容仅作为参考。如有冲突(如产品规格等)，以工艺 工作设计规范和协议要求为准。 Vol 05.01 Petroleum Products and Lubricants (I) D56 - D3710 05.01卷 石油产品和润滑剂(I) D56 - D3710 Vol 05.02 Petroleum Products and Lubricants (II) 05.02卷 石油产品和润滑剂(II) Vol 05.03 Petroleum Products and Lubricants (III) 05.03卷 石油产品和润滑剂(III) Vol 05.04 Petroleum Products, Lubricants and Fossil Fuels: Petroleum Products and 05.04卷 Lubricants (IV) 石油产品、润滑剂和化石燃料:石油产品和润滑剂(IV) Vol 05.05 Petroleum Products, Lubricants, and Fossil Fuels: Combustion 05.05卷 Characteristics; Manufactured Carbon and Graphite Products; Catalysts 石油产品、润滑剂和化石燃料:燃烧特性;人造碳和石墨产品;催化剂 Vol 05.06 Petroleum Products, Lubricants, and Fossil - Gaseous Fuels; Coal and Coke 05.06卷 石油产品、润滑剂和化石燃料:煤和焦炭 Vol 06.01 Paint -- Tests for Chemical, Physical, and Optical Properties; Appearance 06.01卷 油漆—化学、物理和光学性能测试;外观 Vol 06.02 Paint -- Products and Applications; Protective Coatings; Pipeline Coatings 06.02卷 油漆—产品及应用;防护涂料;管道涂料 Vol 06.03 Paint -- Pigments, Drying Oils, Polymers, Resins, Naval Stores, Cellulosic 06.03卷 Esters, and Ink Vehicles 油漆—颜料、干燥油、聚合物、树脂、松脂、纤维素酯、油墨连接料 Vol 06.04 Paint -- Solvents; Aromatic Hydrocarbons 06.04卷 油漆—溶剂;芳香烃 Vol 08-01 Plastics (I): D256 - D3159 08-01卷 塑料(I): D256 - D3159 Vol 08-02 Plastics (II): D3222 - D5083 08-02卷 塑料(II): D3222 - D5083 Vol 08-03 Plastics (III): D5117 - latest; Reinforced Plastic Piping Systems and Chemical 08-03卷 Equipment; Plastic Building Products 塑料(III): D5117—最新;纤维增强塑料管道系统和化工设备;塑料建材 产品 Vol 08-04 Plastic Piping Systems 08-04卷 塑料管道系统 Vol 09.01 Rubber, Natural and Synthetic -- General Test Methods; Carbon Black 09.01卷 天然橡胶和合成橡胶—通用试验方法;炭黑 Vol.09.02 Rubber Products, Industrial - Specifications and Related Test Methods; 09.02卷 Gaskets; Tires 工业橡胶制品—规范和相关测试方法;垫片;轮胎 Vol 11.01 Water (I) 11.01卷 水(I) Vol 11.02 Water (II) 11.02卷 水(II) Vol 15.01 Refractories, Activated Carbon; Advanced Ceramics 15.01卷 耐火材料、活性炭;高级陶瓷 Vol 15.06 Adhesives 15.06卷 粘合剂 AWS -American Welding Society AWS-美国焊接学会 A2.4 Standard Symbols for Welding, Brazing, and Nondestructive Examination 焊接、钎焊及无损检测的标准符号 D1.1 Structural welding Code 结构焊接规范 D1.5 Bridge welding Code 桥接焊规范 D1.6 Structural welding Code – Stainless Steel 结构焊接规范—不锈钢 AWWA - American Water Works Association AWWA-美国自来水厂协会 C-200 Steel Water Pipe - 6 in. (150 mm) and Larger 钢制水管—6英寸(150mm)及更大 C-213 Standard for Fusion-Bonded Epoxy Coating for the Interior and Exterior of Steel Water Pipelines. 钢制输水管道内部及外部熔接环氧涂层标准 CEMA standards CEMA标准 ANSI-CEMA 102-2006 Conveyor Terms & Definitions 输送机术语和定义 ANSI-CEMA 402-2003 Belt Conveyors 带式输送机 CFR - Code of Federal Regulation CFR-联邦法规汇编 1910.119 Process Safety Management of Highly Hazardous Chemicals 高度危险化学物质过程安全管理 EAU - Committee for Waterfront Structures, Harbours and Waterways EAU-海岸建筑物、港口和航道委员会 EAU 2004 Recommendations of the Committee for Waterfront Structures Harbours and thWaterways, 8 Edition, Issued by the Committee for Waterfront Structures Harbours and Waterways and the German Society for Soil Mechanics and Foundation Engineering 海岸建筑物、港口和航道委员会建议，第8版，由海岸建筑物、港口和 航道委员会及德国土壤力学与基础工程学会发行 EEMUA - Engineering Equipment and Material Users Association EEMUA-英国工程设备和材料用户协会 EEMUA 140 Noise procedure specification 噪音过程说明 EEMUA 141 Guide to the use of EEMUA 140 EEMUA 140使用指南 EEMUA 144 90-10 Copper Nickel Alloy Piping for Offshore Applications : Tubes - Seamless & Welded 90-10海上应用的铜镍合金管路:管—无缝焊接 EEMUA 145 90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification: Flanges Composite and Solid 90-10海上应用的铜镍合金管路:规范—法兰混合材料和固体 EEMUA 146 90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification: Fittings 90-10海上应用的铜镍合金管路:规范—管件 Publication No. 189 Guide to Fieldbus Application for the Process Industry, 1997 出版号189 加工工业现场总线应用指南，1997 FieldBus Foundation 现场总线基础 AG-140 Wiring and Installation 31.25kbit/s, Voltage Mode, Wire Medium 31.25kbit/s布线和安装，电压模式，电线媒介 AG-163 31.25kbit/s Intrinsically Safe Systems 31.25kbit/s本质安全系统 AG-165 Fieldbus Installation & Planning Guide 现场总线安装及规划指南 FD-043 Foundation Field bus Technical Overview 基金会现场总线技术概述 IAEA - International Atomic Energy Agency IAEA-国际原子能机构 IAEA Safety Series N?115 (1996 International Basic Safety standards for Protection against Ionizing Radiation Edition) and for the Safety of Radiation Sources. IAEA安全系列N?115(1996版) 国际电离辐射防护和辐射源安全基本安全标准 IAEA Safety Standard series N? Regulation for the safe Transport of Radioactive Material. Ts-R-1 (2005 Edition) 放射性物质安全运输规则 IAEA安全系列N? Ts-R-1(2005 版) ICRP - International Commission of Radiological Protection ICRP-国际辐射防护委员会 ICRP Publication N?103, 2007 Recommendations of the International Commission on Radiological ICRP出版物N?103, 2007 Protection. 国际辐射防护委员会建议 IEC (International Electro Technical Commission) IEC(国际电工技术委员会) IEC 60034 Rotating electrical machines 旋转电机 IEC 60038 Standard voltages 标准电压 IEC 60050 International electrotechnical vocabulary 国际电工词汇 IEC 60051 Direct acting indicating analogue electrical measuring instruments and their accessories 直接作用模拟指示电测量仪表及其附件 IEC 60060 Guide on high-voltage testing techniques 高压试验技术指南 IEC 60071 Insulation co-ordination 绝缘配合 IEC 60072 Dimensions and output series for rotating electrical machines 旋转电机尺寸和输出系列 IEC 60073 Basic and safety principles for man-machine interface, marking and identification 人-机接口,标记和鉴别用的基本原理和安全原则 IEC 60076 Power transformers 电力变压器 IEC 60079-0 to 19 Electrical apparatus for explosive gas atmospheres IEC 60079-0至19 爆炸性气体环境用电气设备 IEC 60085 Electrical insulation – Thermal evaluation and designation 电绝缘—耐热性评定和命名 IEC 60146 Semiconductors converters-General requirements and line commutated converters 半导体变流器.总要求和线路整流转换器 IEC 60183 Guide to selection of HV cables 高压电缆的选择指南 IEC 60214 Tap changers 抽头切换开关 IEC 60225 Octave, Half-Octave and third octave band filters intended for the analysis of sounds and vibrations 声和振动分析用倍频程、1/2倍频程和1/3倍频程滤波器 IEC 60227 Polyvinyl chloride cables of rated voltages up to including 450/750V 额定电压450/750V及以下聚氯乙稀绝缘电缆 IEC 60228 Conductor of insulated cables 绝缘电缆的导体 IEC 60255 Electrical relays 电气继电器 Classification of Degrees of Protection Provided by Enclosure IEC 60529 外壳防护等级分类 IEC 60265 High voltage switches for rated voltages above 1kV and less than 52kV 额定电压1KV以上至52KV以下高压开关 IEC 60269 Cartridge fuses for voltages up to and including 1000V a.c. and 1500V d.c. 1000V交流电压/ 1500V直流电压及以下熔丝管 IEC 60270 High-Voltage Test Techniques - Partial Discharge Measurements 高压测试技术—局部放电测量 IEC 60282 Fuses for voltages exceeding 1000V a.c. 交流电压1000V以上熔断器 IEC 60287 Electric cables - Calculation of the current rating and calculation of losses 电缆—电流额定计算及损失计算 IEC 60289 Reactors 电抗器 IEC 60298 Specification for a.c. metal enclosed switchgear and controlgear for rated voltages over 1 kV and up to and including 52 kV 额定电压1KV以上及52KV(含)交流金属外壳开关设备和控制设备 IEC 60304 Standard colours for insulation for low-frequency cables and wires 低频电缆和电线用绝缘的标准颜色 IEC 60331 Fire Resisting Characteristics of Electric Cables 电缆耐火特性 IEC 60332 Flame Retardant Characteristics of Electric Cables 电缆阻燃特性 IEC 60332-1 Tests on Electrical Cables under Fire Conditions 火灾环境下的电缆试验 IEC 60332-2 Test on electric and optical fiber cables under fire conditions 火灾环境下的电缆和光缆试验 IEC 60332-3 Tests on Electrical Cables under Fire Conditions 火灾环境下的电缆试验 IEC 60364 Electrical installation of buildings (up to 1 kV) 建筑物的电气设施(1kV以下) IEC 60376 Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment 电气设备用工业级六氟化硫(SF6)规范 IEC 60408 Low-voltage air-break switches, air-break disconnectors, air-break switch-disconnectors and fuse-combination units 低压空气断路开关，空气断路切断器，空气断路开关切断器及熔断器组 合电器 IEC 60417 Labels 标签 IEC 60427 High-voltage alternating current circuit breakers 高压交流断路器 IEC 60439 Low voltage switchgear and controlgear assemblies 低压成套开关设备和控制设备 Basic and safety principles for man-machine interface, marking and identification – Identification of equipment terminals and of terminations of certain designated conductors, including general rules for an alphanumeric IEC 60445 system. 人机界面,标志和识别用基本守则和安全守则—电器端子和用相应符号标 志的接线端子的识别方法(包括字母数字标志识别通则) IEC 60446 Basic and safety principles for man-machine interface, marking and identification 人机界面,标志和识别用基本守则和安全守则 IEC 60470 HV a.c. contactors and contactor based motor starters 高压交流接触器及接触器为基础的电动机起动器 IEC 60478 Stabilized power supplies, d.c 直流输出的稳定电源 IEC 60479 Guide to effects of current on human beings and livestock 通过人体和牲畜的电流效应指南 IEC 60502 Power cables with extruded insulation and their accessories for rated voltage from 1 kV (U=1.2 kV) up to 30 kV (U=36 kV) mm 额定电压1kV(Um=1.2kV)到30kV(Um=36kV)挤包绝缘电力电缆及附件 IEC 60529 Classification of Degrees of Protection Provided by Enclosure 外壳防护等级分类 IEC 60617 Graphical symbols for diagrams 电气简图用图形符号 IEC 60622 Secondary cells and batteries containing alkaline or other non-acid electrolytes - Sealed nickel-cadmium prismatic rechargeable single cells 含碱性或其它非酸性电解液的蓄电池和蓄电池组—棱形可充电的密封式 镍镉单体电池 IEC 60623 Vented nickel-cadmium prismatic rechargeable single cells 通风式可再充电的棱形镍镉单体电池 IEC 60695-4 Fire Hazard Testing – Part 4: Terminology Concerning Fire Test 着火危险试验 第4部分:着火试验术语 IEC 60754-2 Test on gases involved during combustion of electric cables- Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity 电缆燃烧时释出气体的试验 第2部分:用测量pH值和电导率来测定取 自电缆的材料燃烧时释出气体的酸度 IEC 60754-2-Am1 Amendment 1 - Test on gases involved during combustion of electric cables- IEC 60754-2-修正件1 Part 2: Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity 修正件1—电缆燃烧时释出气体的试验 第2部分:用测量pH值和电导 率来测定取自电缆的材料燃烧时释出气体的酸度 IEC 60793 Optical fibres 光学纤维 IEC 60794 Optical fibre cables 光纤电缆 IEC 60801 Electromagnetic Compatibility for Industrial Process Measurement and Control Equipment 工业过程测量和控制设备的电磁兼容性 IEC 60811 Common test methods for insulating and sheathing materials of electric cables 电缆的绝缘和护套材料一般性测试方法 IEC 60815 Selection and dimensioning of high-voltage insulators intended for use in polluted conditions 污染环境中所用高压绝缘子的选择和尺寸测定 IEC 60840 Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) – Test methods and requirements 额定电压30 kV (Um = 36 kV)到150 kV (Um = 170 kV)挤包绝缘电力电缆 及附件—试验方法与要求 IEC 60870 Telecontrol equipment and systems 远动设备及系统 Electrical test methods for electric cables. IEC 60885 电缆的电气试验方法 Loading guide for dry-type power transformers IEC 60905 干式电力变压器负载指南 IEC 60909 Short circuit current calculations in three phase AC Systems 三相交流系统中的短路电流计算 IEC 6092.3 Cables (construction, testing and installation) 电缆(施工、测试及安装) IEC 60942 Standard for Sound Level Calibrators 声校准器标准 IEC 60947 Specification for low voltage switchgear and controlgear 低压开关柜和控制柜规范 IEC 61000 Electromagnetic Compatibility for Industrial Process Measurement and Control Equipment 工业过程测量和控制设备电磁兼容性 IEC 61024 Protection of structures against lightning 建筑物的雷电保护 IEC 61034-1 Measurement of smoke density of cables burning under defined conditions – part 1: test apparatus 在规定条件下燃烧的电缆烟雾密度测量.第1部分:试验仪器 IEC 61034-1 Measurement of smoke density of cables burning under defined conditions – part 2: test procedure and requirements 在规定条件下燃烧的电缆烟雾密度测量.第2部分:试验步骤和要求 IEC 61070 Compliance test procedures for steady-state availability 稳态可用性性能审核试验程序 IEC 61123 Reliability testing 可靠性试验 IEC 61131 Programmable Logic Controllers – Parts 2 and 3 可编程逻辑控制器—第2部分与第3部分 IEC 61136-1 Semiconductor Power Convertors - Adjustable Speed Electric Drive Systems - General Requirements Part 1: Rating Specifications, Particularly for D.C. Motor Drives 半导体电力变流器.可调速电气传动系统.一般要求.第1部分:特别是对直 流电动机传动的定额规范 IEC 61140 Protection against electric shocks- common aspects for installation and equipment 电击防护设备.装置和设备的通用方位 IEC 61158-2 Fieldbus Standard for use in Industrial Control System (ISA S50.20) Part 2 – Physical Layer Specification and Service Definition 工业控制系统用现场总线(ISA S50.20)第2部分:物理层规范和服务定义 IEC 61158-3 Fieldbus Standard for use in Industrial Control System Part 3 – Data Link Service Definition 工业控制系统用现场总线.第3部分:数据链路服务定义 IEC 61158-4 Fieldbus Standard for use in Industrial Control System Part 4 – Data Link Protocol Specification 工业控制系统用现场总线.第4部分:数据链路协议规范 IEC 61158-5 Fieldbus Standard for use in Industrial Control System Part 5 – Application Layer Service Definition 工业控制系统用现场总线.第5部分:应用层服务定义 IEC 61158-6 Fieldbus Standard for use in Industrial Control System Part 6 – Application Layer Protocol Specification 工业控制系统用现场总线.第6部分:应用层服务规范 IEC 61241 Electrical apparatus for use in the presence of combustible dust 用于可燃性粉尘场所的电器设备 IEC 61312 Protection against Lightning Electromagnetic Impulse 雷电电磁脉冲的防护 IEC 61508 Functional Safety of E/E/PE Safety-related Systems. 电气/电子/可编程电子安全系统的功能安全 IEC 61511 Functional safety – Safety instrumented systems for the process industry sector 功能安全.加工工业部门用安全仪表化系统 Safety of power transformers, power supplies, reactors and similar products. IEC 61558 电力变压器、电源装置及类似设备的安全 IEC 61639 Direct connection between Power Transformers and Gas Insulated Metal Enclosed Switchgear for rated voltage of 72.5 kV and above 额定电压72.5 kV及以上气体绝缘金属封闭开关设备与电力变压器之间 的直接连接 IEC 61643-1 Surge Protective Devices Connected to Low Voltage Power Distribution System Part 1 – Performance Requirements and Testing Methods 连接到低压配电系统的浪涌保护装置.第1部分:性能要求和试验方法 IEC 61643-21 Surge Protective Devices Connected to Low Voltage Power Distribution System Part 21 – Surge Protective Devices Connected to Telecommunication and Signalling Networks – Performance Requirements and Testing Method 连接到低压配电系统的浪涌保护装置.第21部分: 接到电信和信号传输网 络的电涌保护装置.性能要求和测试方法 IEC 61672 Sound Level Meters – Part 1 & 2 声级计.第1部分与第2部分 IEC 61850 Communication Networks and Systems in Substations 变电站通信网络和系统 IEC 62040 Uninterruptible Power Systems (UPS) 不间断电源系统(UPS) IEC 62271 High Voltage switchgear and controlgear 高压开关设备和控制设备 IEC 62305 Code of practice for protection of structures against lightning 建筑物的雷电防护实施规程 IEC 651 Recommendations for sound level meters 声级计建议 IEC 942 Recommendations for sound calibrators 声校准器建议 IEEE - Institute of Electrical and Electronics Engineers IEEE-电气与电子工程师协会 IEEE 1100 Recommended Practice for Powering & Grounding Electronic Equipment – IEEE Emerald Book 电子设备供电和接地推荐操作规程—IEEE翡翠色书 IEEE 1451.1 Standard for a Smart Transducer Interface for Sensors and Actuators – Network Capable Application Processor Information Model 传感器和驱动器传感界面标准.网络能力应用处理器信息模型 IEEE 802.3 Standard for Information Technology – Telecommunications and Information Exchange between Systems – Local and Metropolitan Area Networks Specific Requirements Part 3 – Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications 信息技术标准.系统间电信和信息交换.局域网和城域网的特定要求 第3部分:带碰撞检测的载波侦听多址访问(CSMA/CD)的访问方法和物 理层规范 IEEE 802.4 Token bus 令牌总线 IEEE STD 518 Guide for Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External Sources. 减小来自外部源的电噪声输入到控制器的电气设备的安装指南 IGE - INSTITUTION OF GAS ENGINEERS IGE-煤气工程师学会 Steel Pipeline for High Pressure Gas Transmission IGE TD 1 高压输气钢制管道 IMO - SOLAS – INTERNATIONAL MARITIME ORGANISATION IMO - SOLAS –国际海事组织 SOLAS 74/78/81/83 International Conventions for the safety of life at sea 国际海上安全公约 International Council of Building Officials 国际建筑官员委员会 UBC Uniform Building Code 统一建筑规范 International Code Council 国际规范协会 IBC International Building Code 2006 国际建筑规范2006 IFC International Fire Code 2006 国际防火规范2006 International Telecommunication Union 国际电信联盟 ITU-T G.652 Characteristics of Single-Mode Optical Fiber and Cables 单模光纤和光缆的特性 ITU-T G.653 Characteristics of Single-Mode Optical Fiber Cables with Displaced Dispersion 色散位移单模光纤和光缆的特性 ITU-T G.654 Characteristics of Single-Mode Optical Fiber Cables with Displaced Section 截止波长位移单模光纤和光缆的特性 ITU-T G.655 Characteristics of Single-Mode Optical Fiber Cables with Non-Null Displaced Dispersion 非零色散单模光缆特性 ITU-T G.656 Characteristics of Non-Null Dispersion Single-Fiber Single-Cable for Optical Wide Band Transport 宽带光传输的非零色散光纤电缆的特性 ITU-T G.661 Definition and Test Methods for the Relevant Generic Parameters of Optical Amplifying Devices and Subsystems 光纤放大器及其子系统有关一般参数的定义和测试方法 ITU-T G.662 Generic Characteristics of Optical Amplifying Devices and Subsystems 光纤放大器及其子系统的一般特性 ITU-T G.664 Optical Safety Procedures and Requirements for Optical Transport Systems 光传送系统的光安全程序和要求 ITU-T G.671 Transmission Characteristics of Optical Components and Subsystems 光组件和子系统的传输特性 ITU-T L.3 Armouring of Cables 电缆的铠装 ITU-T L.10 Optical Fiber Cables for Duct, Tunnel, Aerial and Buried Application 管道、隧道、架空和直埋用的光缆 ITU-T L.12 Optical Fiber Joints 光纤接头 ITU-T L.13 Sheath Joints and Organizers of Optical Fiber Cables in the Outside Plant 场外光纤电缆护套接头和组织体 ITU-T L.14 Measurement Method to Determine the Tensile Performance of Optical Fiber Cables Under Load 负载过轻时确定光纤电缆拉伸性能的测量方法 ITU-T L.25 Optical Fiber Cable Network Maintenance 光纤电缆网络维护 ITU-T L.31 Optical Fiber Attenuators 光纤衰耗器 ITU-T L.36 Single Mode Optical Fiber Connectors 单模光纤连接器 ISA – International Society of Automation ISA-国际自动化协会 ISA 50.02 Fieldbus Standard for Use in Industrial Control Systems Part 2 – Physical Layer Specification and Service Definition Part 3 – Data Link Service Definition Part 4 – Data Link Protocol Specification Part 5 – Application Layer Service Definition Part 6 – Application Layer Protocol Specification 工业控制系统用现场总线标准 第2部分:物理层规范和服务定义 第3部分:数据链路服务定义 第4部分:数据链路服务规范 第5部分:应用层服务定义 第6部分:应用层协议规范 ISA 71 Environmental Conditions for Process Measurement and Control Systems 过程检测和控制系统的环境条件 ISA S5.1 Instrumentation Symbols and Identification 仪表符号和说明 ISA TR50.02 Fieldbus Standard for Use in Industrial Control Systems Part 3 & 4 – Technical for Fieldbus Data Link Layer-Tutorial, Part 9 – User Layer Technical Report 工业控制系统用现场总线标准 第3部分&第4部分:现场总线数据链路层技术.指南 第9部分:用户层技术报告 S-5.1 Instrument Symbols and Identification 仪表符号和说明 S-5.2 Binary Logic Diagrams for Process Operation 用于过程操作的二进制逻辑图 S-5.3 Graphic Symbols for Distributed Control/Shared Display Instrumentation, Logic and Computer Systems. 用于分布式控制的图形符号/共享显示仪表、逻辑和计算机系统 S-5.4 Instrument Loop Drawing 仪表回路图 S-5.5 Graphic Symbols for DCS Display 用于分布式控制系统显示的图形符号 S-75.01 Valve Cv Calculation. Flow Equation for Control Valves Sizing. 阀门流量计算.尺寸控制阀用流量方程式 SP-18.1 Annunciator Sequences and Specifications; 指示器序列和规范 ISO - International Organization for Standardization ISO-国际标准组织 10816 Evaluation of machine vibration by measurements on non-rotating parts 对非旋转部件进行测量以评定机械振动 11064 Ergonomic Design of Control Centers 控制中心的人类工效学设计 1940/1 Mechanical vibration – Balance quality requirements of rigid rotors 机械振动——刚性转子平衡品质的要求 Radiation Protection- Sealed radioactive sources- General Requirements and 2919 classification 辐射防护 密封射线源一般要求和分类 Design & Procurement of Gas Turbine System 3977 燃气轮机系统设计与采购 Radiation protection- Apparatus for industrial gamma radiography. Part 1 3999-1 Specifications for performance, design and tests 射线防护--工业伽马射线装置.第1部分:性能,设计和试验规范 5149 Mechanical Refrigerating Systems Used for Cooling and Heating - Safety Requirements 制冷和加热用机械制冷系统 安全要求 Technical specifications for centrifugal pumps - Class II (Not applicable for 5199 API service) 离心泵技术规范-II类(不适用于API服务) Industries Valves – Pressure testing of Valves 5208 工业用阀门 金属阀门的压力试验 5210 Multiturn Valve Actuator Assembly 多圈旋转阀门驱动器附件 5211 Part-turn Valve Actuator Assembly 部分回转阀门驱动器附件 5351 Steel Ball Valves for Petroleum, Petrochemical and Allied Industries 石油、石化及相关工业用钢制球阀 6385 Ergonomic principles in the design of work systems 设计工作系统的人类工效学原理 Radionuclide gauges- Gauges designed for permanent installation 7205 放射性核检验仪.为固定装置设计的检验仪 Physical Characteristic for Card 7810 卡的物理特性 Physical Characteristic for Card 7816 卡的物理特性 Coating Powders – Part 6: Determination of Gel Time of Thermosetting 8130 Coating Powders at a given Temperature 涂覆用粉.第6部分:在给定温度下热固涂覆用粉热凝时间测定 8501 Preparation of steel substrates before application of paints and related products – Visual assessment of surface cleanliness 涂装油漆和有关产品前钢材预处理.表面清洁度的视觉评价 8995 Lighting of indoor work places 室内工作场所的照明 9908 Technical specifications for centrifugal pump - Class III (Not applicable for API service) 离心泵技术规范-III类(不适用于API服务) Radiation protection - Sealed radioactive sources- leakage test methods 9978 辐射防护.密封放射源.泄漏检验方法 Specifications for Non-Metallic Blast-Cleaning Abrasives 11126 非金属喷砂清理磨料规范 TS 11602 Part 1 Fire protection — Portable and wheeled fire extinguishers — Part 1: Selection TS 11602第1部分 and installation 防火.便携式与推车式灭火器.第1部分:选择和安装 TS \11602 Part 2 Fire protection — Portable and wheeled fire extinguishers — Part 2: TS 11602第2部分 Inspection and maintenance 防火.便携式与推车式灭火器.第2部分:检查和维修 12944-1 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 1: General Introduction 涂料和清漆.防护漆系统对钢结构的腐蚀防护.第1部分:一般性介绍 12944-2 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 2: Classifications of environments 涂料和清漆.防护漆系统对钢结构的腐蚀防护.第2部分: 环境分类 12944-3 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 3: Design and constructive requirements 涂料和清漆.防护漆系统对钢结构的腐蚀防护.第3部分:设计要求和建设 要求 12944-4 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 4: Surface types and preparation 涂料和清漆.防护漆系统对钢结构的腐蚀防护.第4部分:表面类型和表面 准备 12944-5 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 5: Protective paint systems 涂料和清漆.防护漆系统对钢结构的腐蚀防护.第5部分:防护漆系统 12944-7 Paints and varnishes – Corrosion protection of steel structures by protective paint systems – Part 7: Execution and supervision of painting work 涂料和清漆.防护漆系统对钢结构的腐蚀防护.第7部分:涂漆工艺的实施 和管理 14001:2004 Environmental Management System 环境管理体系 Cathodic protection of pipelines transportation system - On-land pipelines 15589 (part 1). 管道传输系统阴极保护-第1部分:陆上管道 8473 Information Technology – Protocol for providing the Connectionless – Mode Network Service 信息技术.提供无连接方式网络服务的协议.连接式网络服务 8503-1 to 4 Preparation of steel substrates before application of paints and related 8503-1至4 products – Surface roughness characteristics of blast -cleaned surfaces 涂装油漆和有关产品前钢材预处理 喷射清理钢材的表面粗糙度特性 8802 Information Technology – Telecommunications and Information – Exchange between Systems – Local and Metropolitan Area Networks – Specific Requirements 信息技术.系统间远程通信和信息交换.局域网和城域网.特定要求 Quality Systems Model for quality assurance in design, development, 9001 production, installation and service 质量体系--设计、开发、生产、安装和服务的质量保证模式 Non-Destructive Testing – Qualification and Certification of Personnel 9712 无损检测.人员的资格鉴定与认证 5167 Measurement of Fluid Flow by Orifice Plates, Nozzles and Venturi Tubes inserted in circular cross section conduits running full. 流量测量节流装置用孔板、喷嘴和文丘里管测量充满圆管的流体流量 ISO/IEC 17050 Part 1 Conformity assessment Supplier?s declaration of conformity Part 1: General ISO/IEC 17050第1部分 requirements 合格评定.供应商的合格声明.第1部分:一般要求 ISO/IEC 17050 Part 2 Conformity assessment Supplier's declaration of conformity Part 2: ISO/IEC 17050第2部分 Supporting documentation 合格评定.供应商的合格声明.第2部分:辅助文档 TC67/SC2 Pipeline transportation systems for the petroleum and natural gas industries 石油、天然气工业的管道输送系统 MSS - Manufacturer’s Standardization Society MSS-制造商标准化协会 MSS SP58 Pipe Hangers and Supports - Materials, Design and Manufacture 管道支吊架 - 材料、设计和制造 MSS SP69 Pipe Hangers and Support - Selection and Application 管道支吊架 – 选择和应用 MSS SP89 Pipe Hangers and Supports - Fabrication and Installation Practice 管道支吊架 – 制造和安装规程 Standard Finishes for Contact Faces of Pipe Flanges and Connecting End MSS SP 6 Flanges of Valves and Fittings 管法兰以及阀门和管件端法兰的接触面标准精度 SP 25 Standard Marking System for Valves, Fittings, Flanges & Unions 阀门、管件、法兰和管接头的标准标记系统 SP 44 Steel Piping Flanges 钢制管道法兰 SP 45 By-Pass and Drain Connection Standard 旁通和排放连接标准 SP 53 Quality Standard for Steel Casting and Forgings for Valves, Fittings and Other Piping Components – Magnetic Particle Examination Method 阀门、法兰、管件和其他管道部件用铸钢件和锻钢件质量标准-磁粉检验 方法 SP 55 Quality Standard for Steel Casting and for Valves, Flanges, Fittings and Other Piping Components – Visual Method for Evaluation of Surface Irregularities 阀门、法兰、管件和其他管道部件用铸钢件质量质量标准-表面缺陷评定 的目视检验方法 SP 70 Cast Iron Gate Valves Flanged and Threaded Ends 法兰端和螺纹端灰铸铁闸阀 SP 75 Specification for High Test Wrought Butt Welding Fittings 优质钢制对焊管件规范 SP 80 Bronza Gate, Globe, Angle, and Check Valves 青铜闸阀、截止阀、角阀和止回阀 SP 97 Integrally Reinforced Forged Branch Outlet Fittings 整体加强锻制分支引出端管件 SP 128 Ductile Iron Gate Valves 球磨铸铁闸阀 NACE - National Association of Corrosion Engineers NACE-美国腐蚀工程师协会 MR 0175 / ISO 15156 Petroleum and Natural Gas Industries - Materials for Use in H2S-containing Environments in Oil and Gas Production 石油天然气工业.油气生产中含硫化氢环境中使用的材料 MR 0103-2010 Material Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments. 腐蚀性炼油环境中耐硫化物应力开裂的材料 RP 0169 Corrosion on underground or submerged metallic piping systems 埋地或水下金属管线系统的腐蚀 RP 0170 Protection of Austenitic Stainless Steels and Other Austenitic Alloys from Polythionic Acid Stress Corrosion Cracking During Shutdown of Refinery Equipment 炼油厂设备停工期间奥氏体不锈钢和其他奥氏体合金连多硫酸应力腐蚀 开裂的预防 Mitigation of alternating current and lightning effects on metallic structures RP 0177 and corrosion control systems 减轻交流电和雷电对金属构筑物和腐蚀控制系统的影响 Discontinuity (Holiday) Testing of New Protective Coatings on Conductive RP 0188 Substrates 导电底材上新涂层的不连续区域(漏涂)的测试 RP 0285 Corrosion control of underground storage tank systems by cathodic protection 利用阴极保护对地下储油罐系统的腐蚀控制 RP 0286 Electrical isolation of cathodically protected pipelines 阴极保护管道的电绝缘 RP 0287 Field Measurement of Surface Profile of brasive Blast–Cleaned Steel Surfaces sing a Replica Tape 用复制贴膜带测定钢铁喷砂处理后表面轮廓线的现场测定 RP 0391 Materials for the Handling and Storage of Commercial Concentrated (90 to 100%) Sulfuric Acid at Ambient Temperatures 室温下处理、贮存浓硫酸(90%,100%)的材料 RP 0403 Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping 避免碳钢炼油厂设备和管道的烧碱应力腐蚀开裂 RP 0775 Preparation, Installation, Analysis, and Interpretation of Corrosion Coupons in Oilfield Operations 油田生产中腐蚀挂片的准备、安装、分析与解释 Holiday Detection of Fusion-bonded Epoxy External Pipeline Coatings of 250 to 760 microm (10 to 30 mil) SP 0490 250至760 microm(10 to 30 mil)溶结环氧粉末管道熔结环氧粉末外涂层漏 涂点检查 SP 0590 Prevention, Detection and Correction of Deaerator Cracking 排气器开裂的预防、检测与校正 TM0177 Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking in Hydrogen Sulfide (H2S) Environments 硫化氢(H2S)环境下金属抗硫化物应力开裂实验室测试 TM0284 Standard Test Method - Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking 管道、压力容器抗氢致开裂钢性能评价的标准试验方法 NEMA SM-12 Direct Connected Steam Turbine Synchronous Generator Units-Air Cooled 直接连接的汽轮机同步发电机组-气冷式 SM-21 Multistage Steam Turbines for Mechanical Drive Service 用于机械传动设施的多级汽轮机 SM-22 Single Stage Steam Turbines for Mechanical Drive Service 用于机械传动设施的单级汽轮机 SM-23 National Electrical Manufacturers Association 全国电气制造商协会 NFPA - National Fire Protection Association NFPA-国家防火协会 --- NFPA‘s recalled in the IBC 2009 Code IBC 2009规范中恢复的NFPA标准 NFPA 101 Life Safety Code 生命安全规范 NFPA 220 Standard on Types of Building Construction 房屋建筑类型标准 NFPA 307 Standard for the Construction and Fire Protection of Marine Terminals, Piers, and Wharves 码头、桥台和驳船的建造和防火标准 NFPA 10 Standard for Portable Fire Extinguishers 便携式灭火器标准 NFPA 11 Standard for Low-, Medium-, and High-Expansion Foam 低、中、高膨胀泡沫系统标准 NFPA 12 Standard on Carbon Dioxide Extinguishing System 二氧化碳灭火系统标准 NFPA 13 Standard for the Installation of Sprinkler Systems 撒水系统安装标准 NFPA 14 Standard for the Installation of Standpipes and Hose Systems 立管和软管系统安装标准 NFPA 15 Standard for Water Spray Fixed Systems for Fire Protection 防火用喷水固定系统标准 NFPA 20 Standard for the Installation of Stationary Pumps for Fire Protection 消防固定水管的安装标准 NFPA 2001 Standard on Clean Agent Fire Extinguishing System 洁净气体灭火系统标准 NFPA 22 Standard for Water Tanks for Private Fire Protection 专用防火储水罐标准 NFPA 30 Flammable and Combustible Liquids Code 可燃性和易燃性液体规则 NFPA 321 Basic Classification of Flammable and Combustible Liquids 易燃和可燃液体的基本分类 NFPA 58 Liquefied Petroleum Gas Code 液化石油气规范 NFPA 59A Standard for the Production, Storage and Handling of Liquefied Natural Gas 液化天然气生产、储存和装运标准 NFPA 72 National Fire Alarm Code 国家火灾报警规范 NFPA 85 Boiler and Combustion System Hazards Code 锅炉与易燃系统危险性规范 NFPA 86 Standard for Ovens and Furnaces 灶箱和炉标准 NFPA 90A Standard for the Installation of Air-Conditioning and ventilation Systems 空调和通风系统安装标准 NFPA 497 Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapours and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas 易燃液体、气体或蒸汽分类和化工生产区中电气装置危险品(经分类)设置 分类推荐实施规程 NFPA 750 Standard on Water Mist Fire Protection Systems 水雾灭火系统标准 NIOSH NIOSH, Publication N? 90-120 A practical guide to effective hearing conservation programs in the NIOSH，出版号90-120 workplace. 工作场所中有效的听力保护 方案 气瓶 现场处置方案 .pdf气瓶 现场处置方案 .doc见习基地管理方案.doc关于群访事件的化解方案建筑工地扬尘治理专项方案下载 实用指南 NIOSH, Publication N? 98-126 Criteria for a Recommended Standard: Occupational Noise Exposure NIOSH，出版号98-126 推荐性标准条件:职业性噪声接触 OCIMF - Oil Companies International Marine Forum OCIMF-石油公司国际海事论坛 --- Guidelines and Recommendations for the Safe Mooring of Large Ships at Piers and Sea Islands 大型船舶在码头和海群岛安全系泊的准则和建议 --- Prediction of Wind and Current Loads on VLCCs 巨型游船上风荷载和电流荷载的预测 --- Mooring Equipment Guidelines 系泊设备准则 OIML - International Organization of Legal Metrology OIML-国际法定计量组织 D 2 Legal units of measurement 法定计量单位 D19 Pattern evaluation and pattern approval 型式评价和型式批准 OSHA - Occupational Safety & Health Administration OSHA-职业安全和健康署 Part 1904 Recording and Reporting Occupational Injuries and Illness 第1904部分 记录和报告职业伤害和疾病 OSHA, 29CFR 1910.95 General Industry Standard, Occupational Noise Exposure. 通用行业标准，职业性噪声接触 Others 其他 IFC IFC Environmental, Health, and Safety Guidelines for Thermal Power Plants of 2008 2008年火电厂IFC环境、健康和安全指南 IFC IFC Environmental, Health, and Safety Guidelines for Petroleum Refining of 2007 2007年石油炼制IFC环境、健康和安全指南 IFC IFC Environmental, Health, and Safety General Guidelines of 2007 2007年IFC环境、健康和安全一般原则 ABMA Boiler Water Limits and Achievable Steam Purity for water tube boilers 水管锅炉锅炉用水限额和可实现的蒸汽纯度 ALPEMA Standards of the Brazed Aluminium Plate Fine Exchanger 钎焊铝板细管壳式热换器标准 AMCA Standard 210 Laboratory methods of testing fans for rating AMCA 210标准 风扇额定值的实验测试方法 EJMA Standard of the Expansion Joint Manufacturers Association 膨胀节制造商协会标准 ETSI 300 392_1 RES TETRA V+D General Network Design RES TETRA V+D一般网络设计 ETSI 300 392_2 RES TETRA V+D Air Interface Specification RES TETRA V+D空中接口规范 ICAO International Civil Aviation Organization 国际民用航空组织 OHSAS 18001:2007 Occupational Health and Safety Assessment Series 职业健康和安全评估系列 SA 8000 : 2008 Social Accountability 社会责任 PIANC - Permanent International Association of Navigation Congresses PIANC-国际航运会议常设协会 WG24 Criteria for Movements of Moored Ships 系泊船舶的运动标准 WG33 Guidelines for the Design of Fender Systems 防撞系统设计指南 SMACNA – Sheet Metal and Air Conditioning Contractor’s National Association SMACNA – 美国金属散热与空调承包商协会 --- HVAC Duct Construction Standards – Metal and Flexible HVAC管道建设标准—金属与柔性 SSPC - The Society for Protective Coatings SSPC – 防护涂料协会 SSPC – VIS 1 Guide and Reference Photographs for Steel Surfaces Prepared by Dry Abrasive Blast Cleaning 钢结构表面干磨料喷射清理处理指导和参考照片 SSPC – VIS 3 Guide and Reference Photographs for Steel Surfaces Prepared by Power – and Hand – Tool Cleaning 钢结构表面电动工具和手工具清理处理指导和参考照片 SSPC–PA2 Measurement of Dry Paint Thickness with Magnetic Gages 用磁性测厚仪测量涂层干膜厚度 SSPC–SP 1 Solvent Cleaning 溶剂清理 SSPC–SP 10 Near–White Blast Cleaning (NACE 2) 近白喷砂清理(NACE 2) SSPC–SP 2 Hand Tool Cleaning 手工具清理 SSPC–SP 3 Power Tool Cleaning 电动工具清理 SSPC–SP 5 White Metal Blast Cleaning (NACE 1) 白金属喷砂清理(NACE 1) SSPC–SP 6 Commercial Blast Cleaning (NACE 3) 工业级喷砂清理(NACE 3) SSPC–SP 7 Brush–Off Blast Cleaning (NACE 4) 扫射喷砂清理(NACE 4) SSPC–SP 8 Pickling 酸洗 Steam Condenser 蒸汽冷凝器 HEI Heat Exchanger Institute 热换器学会 TIA – Telecommunication Industry Association TIA-通讯工业协会 TIA/EIA-455-B Standard Test Procedure for Fibre Optic Fibres, Cables, Transducers, Sensors, Connecting and Terminating Devices, and other Fibre Optic Components. 光纤、光缆、变换器、传感器、连接和终端装置及其他光纤元件的标准 试验程序 TIA-568-C.0 Commercial Building Telecommunications Cabling Standard 商业建筑通信电缆布线标准 TIA-568-C.2 100-Ohm Balanced Twisted-Pair Cabling Standard 100欧姆平衡双绞线电缆布线标准 TIA-569 Commercial Building Standard for Telecommunications Pathways and Spaces 商业建筑电信通道及空间标准 TIA-598-C Optical Fibre Cable Colour Coding - (January 2005) 光缆颜色编码 -(2005年1月) TIA-606-A Administration Standard for the Telecommunications Infrastructure of Commercial Building 业及建筑物电信基础结构的管理标准 TIA-942 Telecommunications Infrastructure Standard for Data Centres 数据中心电信基础设施标准 UL - Underwriters Laboratories UL-保险商实验室 UL 1709 Rapid Rise Fire Test of Protection Material for Structural Steel 结构钢用防火材料急剧增长的防火测试 USNRC - United States Nuclear Regulatory Commission USNRC-美国核管理委员会 USNRC Regulatory Guide 6.5 General Safety Standard for Installation using non-medical sealed Gamma – (Revision 1, July 2008) Ray sources. USNRC管理导则6.5(第1修订使用非医疗密封伽马射线源设施的通用安全标准 版，2008年7月) USNRC Regulatory Guide 7.3 Procedures for picking up and receiving package of radioactive material. (May 1975) 挑选并接收放射性物质包的程序 USNRC管理导则7.3(1975年5 月) 2. National Standards of other countries referenced to International Standards and acknowledge by Cuban Authorities 2.其他国家参照国际标准并由古巴当局认可的国家标准 BS - British Standard BS – 英国 标准 1377 Methods of test for soils for civil engineering purposes 木工程用土壤试验方法 1868 Specification for Steel Check Valves (Flanged and Butt-welding ends) for Petroleum, Petrochemical and Allied Industries 石油、石油化学及有关工业用钢止回阀(有法兰及对焊端)规范 1873 Steel Globe and Globe Stop and Check Valves (Flanged and Butt-welding ends) for Petroleum, Petrochemical and Allied Industries 石油、石油化学及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及 对接焊端)规范 3799 Specification for Steel Pipe Fittings, Screwed and Socket Welding for Petroleum Industry 石油工业用钢管件、螺旋管接头和套管焊接规范 Specification for Metric Dimensions of toroidal Sealing Rings (?O‘-rings) and 4518 their Housings 环形密封圈(―O―形环)及其安装座的米制尺寸规格 5352 Steel Wedge Gate, Globe and Check Valves 50mm and smaller for Petroleum, Petrochemical and Allied Industries 石油、石油化学及有关工业用小于等于50mm的钢制楔式闸阀、截止阀 和止回阀 6349-2 Code of practice for marine structures – Part 2 Design of quay walls, jetties and dolphins 海上建筑实用规程.第2部分:码头、栈桥和系靠船墩设计 6349-4 Code of practice for marine structures – Part 4 Design of Fendering and Mooring Systems 海上建筑实用规程.第4部分:护舷系统和系泊系统的设计 8010-3 Pipelines subsea design construction and installation 海底管道设计施工和安装 CAN/CSA - Canadian Standard Association CAN/CSA – 加拿大标准协会 Z245.20 External Fusion Bond Epoxy Coated Steel Pipe. 钢管熔结环氧粉末外涂层 DIN - Deutsches Institut für Normung DIN – 德国标准化学会 15019-2 Cranes Stability for Non Rail Mounted Mobile Cranes –Test Loading and Calculation 起重机.无轨道移动式起重机的稳定性.试验载荷与计算 30670 Polyethylene Sheathing of Steel Tubes and of Steel Shapes and fittings. 钢管及型钢和管件聚乙烯护套 Thermoset Plastic Coatings for Buried Steel Pipes 30671 埋地钢管热固性塑料涂层 30672 Coatings of Corrosion Protection Tapes and Heat Shrinkable Material for Pipelines. 管道防腐胶带和热缩材料涂层 4024 Part 1 Machines foundations 4024 第1部分 机械基础 43760 Temperature Conversions Table for Pt 100 Ohm @ 0?C Resistance Elements. 100欧姆铂与0?C电阻元件的温度换算表 Testing of Plastics and Elastomer Films, Paper, Board and Other Sheet 53122 Materials – Determination of Water Vapour Transmission 塑料和弹性薄膜、纸、纸板和其它板材试验.水蒸气渗透性的测定 Methods of Test for Materials for Electrical Purposes – Measuring of the 53482 Electrical Resistance of Non-metallic Materials 电气用材料试验方法.非金属材料的电阻测量 DNV - Det Norske Veritas – Rules for Submarine Pipeline Systems DNV – 挪威船级社 – 海底管线系统规章 OS-F101 Submarine Pipeline Systems 海底管线系统 DNV-RP-B401 Cathodic Protection Design 阴极保护设计 DNV-RP-F103 Cathodic Protection of Submarine Pipelines by Galvanic Anodes 海底管线电镀阳极阴极保护 DNV-RP-F109 On-Bottom Stability Design of Submarine Pipelines 海底管道在海床上的稳定性设计 DNV-RP-F105 Free Spanning Pipelines 自由悬跨管线 DNV-RP-F111 Interference Between Trawl Gear and Pipelines 拖网渔具和管线间的干扰 DNV-RP-F110 Global Buckling of Submarine Pipelines Structural Design due to High Temperature/High Pressure 由高温/高压引起的海底管线结构总体屈曲 EAEC or Euratom - European Atomic Energy Community EAEC或Euratom – 欧洲原子能共同体 --- European Commission Services considerations with regard to natural radiation sources in BSS Directive, 16-January-2009. 欧洲委员会服务关于2009年1月16日BSS指令中天然辐射源的考虑 Council Directive 96/29/Euratom Basic Safety Standards for the protection of the health of workers and the of 13 May 1996 general public against the dangers arising from ionising radiation 1996年5月13日理事会指令为保护工人和广大市民免受电离辐射产生的危险的基本安全标准 96/29/Euratom EN - European Normative EN – 欧洲规范 EN 10020 Definition and classification of grades of steel 钢的等级定义和划分 EN 10021 General technical delivery requirements for steel and iron products 钢铁制品的一般交货技术条件 EN 10025 Hot rolled products of structural steel 热轧结构钢产品 EN 10079 Definitions of steel products 钢制品定义 EN 10080 Steel for the reinforcement of concrete 混凝土增强用钢 EN 10113-1 Hot rolled products in weldable fine grain structural steels 热轧可焊接细晶粒结构钢制品 EN 10137-3 Plate and wide flats made of high yield strength structural steels 高屈服强度结构钢制薄板和宽扁钢 EN 10138 Prestressing steel 预应力钢材 EN 10204 Metallic Products – Type of Inspection Documents 金属产品-检验文件类型 Non-destructive Testing of Steel Forgings EN 10228 钢锻件无损检验 Steel Tubes and Fittings for on and Offshore Pipelines – External Two Layer EN 10288 Extruded Polyethylene Based Coatings 岸上和近海管线用钢管及配件.外部双层挤压聚乙烯基涂层 Steel tubes and fittings for onshore and offshore pipelines - External liquid EN 10289 applied epoxy and epoxy-modified coatings Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings EN 10290 岸上和近海管道用钢管和配件.外用液体涂刷的环氧涂料及环氧改性的涂 料 Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic EN 12068 protection - Tapes and shrinkable materials 阴极保护.与阴极保护有关的埋于地下的或浸于水的钢管防腐的外部有机 涂层.磁带和可缩材料 EN 13480-1 Metallic industrial piping – General 金属工业管道.总则 EN 13480-2 Metallic industrial piping – Materials 金属工业管道.材料 EN 13480-3 Metallic industrial piping – Design and calculation 金属工业管道.设计和计算 EN 13480-4 Metallic industrial piping – Fabrication and Installation 金属工业管道.生产和安装 EN 13480-5 Metallic industrial piping – Inspection and Testing 金属工业管道.检验和测试 EN 1990 Eurocode : Basis of structural design 欧洲规范:结构设计基础 EN 1991 Eurocode 1 – Actions on structures 欧洲规范1:对结构产生的作用 EN 1992-1-1 Eurocode 2 – General rules and rules for buildings 欧洲规范2:一般规则和建筑物用规则 EN 1992-1-2 Eurocode 2 – Structural fire design 欧洲规范2:结构防火设计 EN 1992-2 Eurocode 2 – Design of concrete structures - Concrete bridges - Design and detailing rules 欧洲规范2:混凝土结构的设计.混凝土桥.设计和详细规则 EN 1992-3 Eurocode 2 – Liquid retaining and containing structure 欧洲规范2:液体容纳和容器结构 EN 1993-1 Eurocode 3 – General design rules and rules for building, 欧洲规范3:一般设计规则和建筑物用规则 EN 1993-2 Eurocode 3 – Steel Bridge, 欧洲规范3:钢桥 EN 1993-3 Eurocode 3 – Tower, Masts and chimneys; 欧洲规范3:塔、杆和烟囱 EN 1993-4 Eurocode 3 – Silos, Tanks and pipelines; 欧洲规范3:筒仓、油罐和管道 EN 1993-5 Eurocode 3 – Piling; 欧洲规范3:打桩工程 EN 1993-6 Eurocode 3 – Crane supporting structures; 欧洲规范3:起重机支撑结构 EN ISO 898-1 Mechanical properties of fasteners made of carbon steel-alloy 碳钢和合金钢紧固件的机械性能 EN 81-1 Safety Rules for the construction and installation of lift – Part 1: Electric Lift 电梯制造与安装安全规范.第1部分:电梯 EN 81-7 Safety Rules for the construction and installation of lift – Part 7: Rack and Pinion Lift 电梯制造与安装安全规范.第7部分:齿轮齿条电梯 F.E.M. 1.001 Rules for the design of hoisting appliances (European Federation of Material Handling - Fédération Européenne de la Manutention) 起重机械设计规范(欧洲物料运输联合会) ENV 13670 Execution of concrete structure 混凝土结构施工 EN - European Normative for Personal Protective Equipment (PPE) EN – 欧洲个人防护设备(PPE)规范 EN 136 Respiratory protective devices. Full face masks. Requirements, testing, marking 呼吸保护装置.全面罩.要求、试验、标记 EN 141 Respiratory protective devices. Gas filters and combined filters. Requirements, testing, marking 呼吸保护装置.气体过滤器和组合过滤器.要求、试验、标记 EN 148-1 Respiratory protective devices: threads for face pieces. Standard thread connection 呼吸保护装置.面罩螺纹.标准螺纹连接 EN 166 Personal eye protection. Specifications 个人眼镜保护.规范 EN 340 Protective clothing. General requirements 防护服.一般要求 EN 345-1 Requirements for safety footwear fitted with toecaps designed to give protection against impact 旨在防冲击的加鞋头的安全鞋的要求 EN 352-2 Hearing protectors. Safety requirements and testing, generally about earplugs. 护听器.安全要求和试验.耳塞 EN 352-3 Hearing protectors. Safety requirements and testing. Ear-muffs attached to an industrial safety helmet 护听器.安全要求和试验. 工业安全头盔的耳套 EN 374 Protective gloves against chemicals and micro-organisms 化学品和微生物防护手套 EN 388 Protective gloves against mechanical risks 机械风险防护手套 EN 397 Specification for industrial safety helmets 工业安全头盔规范 EN 407 Protective gloves against thermal risks (heat and/or fire) 防热保护手套(热和/或火) EN 531 Protective clothing for workers exposed to heat 热接触工人的防护服 EN 1149-1 Protective clothing. Electrostatic properties. Test method for measurement of surface resistivity 防护服.静电性能. 表面电阻测量的实验方法 EN 1149-2 Protective clothing. Electrostatic properties. Test method for measurement of the electrical resistance through a material (vertical resistance) 防护服装.静电特性.通过材料的电阻(垂直电阻)的测量的实验方法 EN 13034 Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment) 液体化学品防护服.提供液体化学品有限防护性能的化学防护服性能要求 (6型和PB[6]型设备) NS - Norsok Standards NS – 挪威石油工业技术标准 3481 Soil investigation and design of marine structures 土壤调查和海事结构设计 8000 Geotechnical testing – laboratory methods 岩石测试—实验法 G-CR-001 Common requirements for marine soil investigations 海洋土壤调查一般要求 Y-001 Subsea Pipelines 海底管道 U.S. Army Corps of Engineers 美国陆军工程兵团 --- Shore Protection Manual 海岸保护手册 1110-2-1613 Hydraulic Design of Deep Draft Navigation Projects 装载量航道工程水力设计 Tm-5-1300 Structures Resist The Effects Of Accidental Explosions 结构抵御意外爆炸的影响 VDI VDI 2056 Criteria for assessing mechanical vibrations of machines 评估机器的机械振动标准 3. National Standards of other countries not referenced to International Standards and not acknowledge by Cuban Authorities (Chinese standard) 3.其他国家未参照国际标准且未被古巴当局认可的国家标准(中国标准) GB – China National Standards GB – 中国国家标准 Reinforcement (Rebar) 钢筋(螺纹钢) GB 1499.1 Steel for the reinforcement of concrete Part 1: Hot rolled plain bars 钢筋混凝土用钢 第1部分:热轧光圆钢筋 GB 1499.2 Steel for the reinforcement of concrete Part 2: Hot rolled ribbed bars 钢筋混凝土用钢 第2部分:热轧带肋钢筋 Structural steel (Material) 结构钢(材料) GB/T 700-2006 Carbon Structural steels 碳素结构钢 GB/T 1591-2008 High strength low alloy structural steels 低合金高强度结构钢 Structural steel (Shape steel) 结构钢(型钢) GB/T 11263-2005 The hot-rolled H and cut T section 热轧H型钢和部分T型钢 YB 3301-2005 The welded steel H-section 焊接H型钢 GB/T 706-2008 Hot rolled section steel 热轧型钢 GB/T 8162-2008 Seamless steel tubes for structural purposes 结构用无缝钢管 GB/T 5117-1995 Carbon steel covered electrodes 碳钢焊条 GB/T 5118-1995 Low alloy steel covered electrodes 低合金钢焊条 YB/T 4001.1-2007 Steel bar grating and matching parts Part 1: Steel bar grating 钢格栅板及配套件 第1部分:钢格栅板 YB/T 4001.1-2007 Steel bar grating and matching parts Part 1: Steel bar grating 钢格栅板及配套件 第1部分:钢格栅板 GB/T 4159-2007 Hot Rolling Checker Plate and Strip 热轧花纹钢板和钢带 GB/T 17395-2008 Dimensions, Shapes, Masses and Tolerance of Seamless steel tubes 无缝钢管尺寸、外形、重量及允许偏差 GB/T 21835-2008 Dimensions and Masses per Unit Length of Welded Steel Pipes 焊接钢管尺寸及单位长度重量 Structural steel (Fastener) 结构钢(紧固件) GB/T 1228-2006 High strength bolts with large hexagon head for steel structures 钢结构用高强度大六角头螺栓 GB/T 1229-2006 High strength large hexagon nuts for steel structures 钢结构用高强度大六角螺母 GB/T 1230-2006 High strength plain washers for steel structures 钢结构用高强度垫圈 GB/T 1231-2006 Specifications of high strength bolts with large hexagon head, large hexagon nuts, plain washers for steel structures 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件 GB/T 3077-1999 Alloy structure steels 合金结构钢 GB/T 5782-2000 Hexagon head bolts 六角头螺栓 GB/T 6170-2000 Hexagon nuts, style 1 1型六角螺母 GB/T 5780-2000 Hexagon head bolts – Product grade C 六角头螺栓C级 GB/T 41-2000 Hexagon nuts – Product grade C 六角螺母 C级 Coating and Galvanizing 涂层和镀锌 GB/T 13912-2002 Metallic Coatings – Hot dip Galvanized Coatings on Fabricated Iron and Steel Articles – Specifications and Test Methods 金属覆盖层 钢铁制件热浸镀锌层 技术要求及试验方法