联想s10-3s拆机指南nullIdeaPad™ S10-3s 拆装介绍IdeaPad™ S10-3s 拆装介绍AnalysisAnalysis1. Release battery lock and latch, take the battery out of computer.AnalysisAnalysis2. Loosen 3 screws of keyboard, and unsnap 4 latches to take the keyboard out of upper case
3X SCREWS M2*L2Analysis...
nullIdeaPad™ S10-3s 拆装介绍IdeaPad™ S10-3s 拆装介绍AnalysisAnalysis1. Release battery lock and latch, take the battery out of computer.AnalysisAnalysis2. Loosen 3 screws of keyboard, and unsnap 4 latches to take the keyboard out of upper case
3X SCREWS M2*L2AnalysisAnalysis3. Remove the 6 screws of lower case and 4 screws on the keyboard plate4X SCREWS M2*L56X SCREWS M2*L8AnalysisAnalysis4. Distribute the lower case from system module;L-CASESYSTEMAnalysisAnalysis5. Remove 2 screws form two hinges and open them;
6. Unplug the cables of the antenna and CCD then take them out from the orbits;
7. Unplug the LCD cable from system module;2 X SCREWS M2*L5AnalysisAnalysis8. Distribute the system module and the LCD moduleSYSTEM MODULELCD MODULEAnalysisAnalysis9. Take the HDD away from system module;
10. Remove a screw of mini-card then take it away;
11. Take the DIMM away from system module;1X SCREW M2*L3.5AnalysisAnalysis12. Remove 2 screws of fan then loosen the cable connector and take it away;
13.Loosen the blue-tooth cable and remove it;2X SCREWS M2*L3.5BLUE TOOTH CONNECTORAnalysisAnalysis14. Remove four screws from MB board and two of I/O board1X SCREW M2*L2 UNDER KEYBOARD5X SCREWS M2*L3.5AnalysisAnalysis15. Loosen the FFC touch pad cable and speaker cable connectors ;AnalysisAnalysis16. Remove the MB board and I/O board form the upper case;17. Loosen two connectors of the cable and distribute them;AnalysisAnalysis18. Remove two screws of touch pad bracket and take it away from upper case;TOUCH PAD BRACKET2X SRCEWS M2*L2AnalysisAnalysis19. Push these two hooks then loosen it away from upper case;TOUCH PAD COVERAnalysisAnalysis20. Remove two screws of speaker then distribute it from upper case;2X SCREWS M2*L3SPEAKERAnalysis21. Remove 4 rubbers from LCD bezel;AnalysisAnalysisAnalysis22. Remove 4 screws on the bezel then take it out of LCD module;4X SCREWS M2*L3.5AnalysisAnalysis23. Distribute two bezel caps from LCD module; AnalysisAnalysis24. Remove 4 screws on the hinge bracket;4XSCREWS M2*L2AnalysisAnalysis25. Take the power board out of A-cover by push the hooks;
26. Take the LCD out of the panel with the power board and LCD cable;AnalysisAnalysis27. Unplug two connectors which on the power board and LCD, then distribute them;POWER BOARD AND LCD CABLELCDnull
本文档为【联想s10-3s拆机指南】，请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑，
图片更改请在作品中右键图片并更换，文字修改请直接点击文字进行修改，也可以新增和删除文档中的内容。
该文档来自用户分享，如有侵权行为请发邮件ishare@vip.sina.com联系网站客服，我们会及时删除。
[版权声明] 本站所有资料为用户分享产生，若发现您的权利被侵害，请联系客服邮件isharekefu@iask.cn，我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权，请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传，仅限个人学习分享使用，禁止用于任何广告和商用目的。
浙公网安备 33021202002483