DIN 40680-110 10.3.2.2 Hard Machined Ceramic For parts made of technical ceramics for machine construction applications, the tolerances mentioned above for functional surfaces are often inadequate for the user's needs. For this reason, tolerances for ceramic parts in acc...
10 10.3.2.2 Hard Machined Ceramic For parts made of technical ceramics for machine construction applications, the tolerances mentioned above for functional surfaces are often inadequate for the user's needs. For this reason, tolerances for ceramic parts in accordance with DIN ISO 2768-m-K are quoted. These can be achieved through hard machining. Drawing specifications Dimensional tolerances that do not correspond to the general tolerances according to this standard are to be listed according to DIN 40 680-1 and -2 as tolerances or as ISO tolerance zones, directly stating the appropriate nominal dimension. General tolerances with symmetrical dimensions with accuracy grades "medium" and "coarse" according to tables 29 and 30 are not added directly to the nominal dimensions. Instead, the following entries are made in the title block: DIN 40 680-A-m or DIN 40 680-A-g. If several ceramic parts are shown on a single drawing, and if those parts are produced using different processes and therefore possess general tolerances with different grades of precision as specified by DIN 40 680-1, then the coarsest precision grade is entered into the title block. The tolerances with the finer precision grade are then added to the corresponding nominal dimension. It can happen that for reasons of function, or for reasons concerned with production techniques, either only positive or only negative tolerance dimensions can be shown, but that the tolerance range is nevertheless intended to correspond to one of the particular precision grades in the general tolerances according to tables 29/30. In such cases, the figure for the associated general tolerance is doubled where the relevant nominal dimension is stated, and simply given an arithmetic sign. These tolerances, however, are not considered general tolerances, and are thus added to the corresponding nominal dimension rather than being entered into the title block. Since the general tolerances for the "fine" accuracy grade are not fixed, either the tolerance agreed between the user and the manufacturer or the ISO tolerances are always added after the nominal dimension. For further details, see DIN 40 680-1. Table 29: Manufacturing procedures for dimensional tolerances in accordance with DIN 40 680-1 for the "coarse" and " fine" precision grades Table 30: General tolerances for products without finishing after firing
本文档为【DIN 40680-1】，请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑，
图片更改请在作品中右键图片并更换，文字修改请直接点击文字进行修改，也可以新增和删除文档中的内容。
该文档来自用户分享，如有侵权行为请发邮件ishare@vip.sina.com联系网站客服，我们会及时删除。
[版权声明] 本站所有资料为用户分享产生，若发现您的权利被侵害，请联系客服邮件isharekefu@iask.cn，我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权，请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传，仅限个人学习分享使用，禁止用于任何广告和商用目的。
浙公网安备 33021202002483