candence虚拟机linux安装

字号：大 中 小 最近从零开始安装cadence ic5141，路途是曲折的，结果是成功地，以下就简单组合安装过程，以备大家不时之需：） 软件准备： 1.VMWARE 软件虚拟安装linux操作系统 下载地址：http://www.crsky.com/soft/1863.html 2.linux操作系统,redhat 7.2（最省心） 或 RedFlag DT5.0 redhat7.2比较难找了，DT5.0讯雷上有！ 3.Cadence IC5141 user4(4CD)+Base(3CD,only cd1 needed) 软件在emule上下的，种子很少，下得很辛苦，有需要的朋友在这留下联系方式，定时开机供下载~ 安装过程：建议大家单独分出一个15G左右的盘 1.xp上安装VMWARE，在此不 表 关于同志近三年现实表现材料材料类招标技术评分表图表与交易pdf视力表打印pdf用图表说话 pdf ^_^ 2.创建虚拟系统：以下参考http://www.360doc.com/showWeb/0/0/335849.aspx 新建虚拟机-〉典型-〉类型选择为linux->内存选项最大值284-〉网络 -〉硬盘(ide 硬盘，分配空间6G，可以尽量大，因为以后没办法加大这个硬盘了，只能添加另外一个硬盘；不要勾马上分配空间选项，因为VM会自动根据使用量分配空间（分配后就回不去了。。））-〉ok 虚拟机窗口-〉编辑虚拟机设置-〉可以改变刚才的设置：硬盘添加/内存/CDROM可选iso镜像或其他，选项-〉Shared Folders 可以添加fat32 目录 工贸企业有限空间作业目录特种设备作业人员作业种类与目录特种设备作业人员目录1类医疗器械目录高值医用耗材参考目录 共享，在VM下可以与windows互相读写cool：） 3.安装Linux OS： 虚拟机窗口-〉启动虚拟机-设置bios boot from cdrom（启动按F2键）-〉restart-〉TEXT安装界面-〉okokok。。ok-〉分区时选择“使用 Disk Druid 进行手工分区”，点击“下一步”，这时会提示无法读取sda的分区表，这是因为我们创建的虚拟硬盘如同刚买回来的硬盘一样，没有进行过分区操作，点击“是”即可，分配空间512M（内存大小），挂在点为“\swap”,数据类型为swap；分配其余全部空间，挂载点位“\”，数据类型ext3，选择为主分区-〉在主分区上安装系统，引导为GRUB，放在主分区的hda1上-〉全选默认，自动安装，更换碟片-〉ok http://blog.csdn.net/80x88/archive/2004/10/13/135391.aspx 安装VM tool： 1、以ROOT身份进入LINUX 2、按下 CTRL+ALT组合键，进入主操作系统，点击VMWARE状态栏安装提示，或者点击 SETTING菜 单下的ENABLE VMWARE TOOLS子菜单。 3、确认安装VMWARE TOOLS。 　这时我们并没有真正的安装上了VMWARE TOOLS软件包，如果您点击菜单：DEVICES，您就会发现光驱的菜单文字变为：ide1：0-> C:\Program Files\VMware\VMware Workstation\Programs\linux.iso，这表示VMWARE将LINUX的ISO映象文件作为了虚拟机的光盘 4、鼠标点击LINUX界面，进入LINUX。 5、运行如下命令，注意大小写。 　　mount -t iso9660 /dev/cdrom /mnt （有的不用，自动mount） 　　加载CDROM设备，这时如果进入 /mnt 目录下，你将会发现多了一个文件：vmware-linux-tools.tar.gz。这就是WMWARE TOOLS的LINUX软件包，也就是我们刚才使用WINISO打开LINUX.ISO文件所看到的。 　　cp /mnt/vmware-linux-tools.tar.gz /tmp 　　将该软件包拷贝到LINUX的 TMP目录下。 　　umount /dev/cdrom 　　卸载CDROM。 　　cd /tmp 　　进入TMP目录 　　tar zxf vmware-linux-tools.tar.gz 　　解压缩该软件包，默认解压到vmware-linux-tools目录下（与文件名同名）。 　　cd vmware-linux-tools 　　进入解压后的目录 　　./install.pl 　　运行安装命令。 拷贝粘贴第5步的路径，然后一直按回车，选择屏幕分辨率。 参考过程： Installing the content of the package. In which directory do you want to install the binary files? [/usr/bin] What is the directory that contains the init directories (rc0.d/ to rc6.d/)? [/etc/rc.d] What is the directory that contains the init scripts? [/etc/rc.d/init.d] In which directory do you want to install the daemon files? [/usr/sbin] In which directory do you want to install the library files? [/usr/lib/vmware-tools] The path "/usr/lib/vmware-tools" does not exist currently. This program is going to create it, including needed parent directories. Is this what you want? [yes] In which directory do you want to install the documentation files? [/usr/share/doc/vmware-tools] The path "/usr/share/doc/vmware-tools" does not exist currently. This program is going to create it, including needed parent directories. Is this what you want? [yes] The installation of VMware Tools 5.5.3 build-34685 for Linux completed successfully. You can decide to remove this software from your system at any time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl". Before running VMware Tools for the first time, you need to configure it by invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want this program to invoke the command for you now? [yes] （运行vmware-config-tools来配置） Stopping VMware Tools services in the virtual machine: Guest operating system daemon: [确定] Trying to find a suitable vmhgfs module for your running kernel. None of the pre-built vmhgfs modules for VMware Tools is suitable for your running kernel. Do you want this program to try to build the vmhgfs module for your system (you need to have a C compiler installed on your system)? [yes] Using compiler "/usr/bin/gcc". Use environment variable CC to override. 9.直到该步骤，拷贝粘贴第7步的路径，然后一直按回车，直到选择屏幕分辨率。 What is the location of the directory of C header files that match your running kernel? [/usr/src/kernels/2.6.18-1.2849.fc6-i686/include] Extracting the sources of the vmhgfs module. Building the vmhgfs module. Using 2.6.x kernel build system. make: Entering directory `/tmp/vmware-config3/vmhgfs-only' make -C /usr/src/kernels/2.6.18-1.2849.fc6-i686/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory `/usr/src/kernels/2.6.18-1.2849.fc6-i686' CC [M] /tmp/vmware-config3/vmhgfs-only/cpName.o CC [M] /tmp/vmware-config3/vmhgfs-only/cpNameLinux.o CC [M] /tmp/vmware-config3/vmhgfs-only/dev.o CC [M] /tmp/vmware-config3/vmhgfs-only/driver.o CC [M] /tmp/vmware-config3/vmhgfs-only/hgfsUtil.o CC [M] /tmp/vmware-config3/vmhgfs-only/main.o CC [M] /tmp/vmware-config3/vmhgfs-only/staticEscape.o LD [M] /tmp/vmware-config3/vmhgfs-only/vmhgfs.o Building modules, stage 2. MODPOST CC /tmp/vmware-config3/vmhgfs-only/vmhgfs.mod.o LD [M] /tmp/vmware-config3/vmhgfs-only/vmhgfs.ko make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2849.fc6-i686' cp -f vmhgfs.ko ./../vmhgfs.o make: Leaving directory `/tmp/vmware-config3/vmhgfs-only' Unable to make a vmhgfs module that can be loaded in the running kernel: insmod: error inserting '/tmp/vmware-config3/vmhgfs.o': -1 Invalid module format There is probably a slight difference in the kernel configuration between the set of C header files you specified and your running kernel. You may want to rebuild a kernel based on that directory, or specify another directory. The filesystem driver (vmhgfs module) is used only for the shared folder feature. The rest of the software provided by VMware Tools is designed to work independently of this feature. If you wish to have the shared folders feature, you can install the driver by running vmware-config-tools.pl again after making sure that gcc, binutils, make and the kernel sources for your running kernel are installed on your machine. These packages are available on your distribution's installation CD. [ Press Enter key to continue ] pcnet32 38085 0 Unloading pcnet32 module Trying to find a suitable vmxnet module for your running kernel. None of the pre-built vmxnet modules for VMware Tools is suitable for your running kernel. Do you want this program to try to build the vmxnet module for your system (you need to have a C compiler installed on your system)? [yes] Extracting the sources of the vmxnet module. Building the vmxnet module. Using 2.6.x kernel build system. make: Entering directory `/tmp/vmware-config4/vmxnet-only' make -C /usr/src/kernels/2.6.18-1.2849.fc6-i686/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory `/usr/src/kernels/2.6.18-1.2849.fc6-i686' CC [M] /tmp/vmware-config4/vmxnet-only/vmxnet.o Building modules, stage 2. MODPOST CC /tmp/vmware-config4/vmxnet-only/vmxnet.mod.o LD [M] /tmp/vmware-config4/vmxnet-only/vmxnet.ko make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2849.fc6-i686' cp -f vmxnet.ko ./../vmxnet.o make: Leaving directory `/tmp/vmware-config4/vmxnet-only' Unable to make a vmxnet module that can be loaded in the running kernel: insmod: error inserting '/tmp/vmware-config4/vmxnet.o': -1 Invalid module format There is probably a slight difference in the kernel configuration between the set of C header files you specified and your running kernel. You may want to rebuild a kernel based on that directory, or specify another directory. The fast network device driver (vmxnet module) is used only for our fast networking interface. The rest of the software provided by VMware Tools is designed to work independently of this feature. If you wish to have the fast network driver enabled, you can install the driver by running vmware-config-tools.pl again after making sure that gcc, binutils, make and the kernel sources for your running kernel are installed on your machine. These packages are available on your distribution's installation CD. [ Press Enter key to continue ] Detected X.org version 7.1. 10.到了该步骤，问你是否改变X-window的设置，选y，就可以改变分辨率。 Do you want to change your guest X resolution? (yes/no) [no] y Please choose one of the following display sizes (1 - 13): [1] "640x480" [2]< "800x600" [3] "1024x768" [4] "1152x864" [5] "1280x800" [6] "1152x900" [7] "1280x1024" [8] "1376x1032" [9] "1400x1050" [10] "1680x1050" [11] "1600x1200" [12] "1920x1200" [13] "2364x1773" Please enter a number between 1 and 13: 3）在cds5目录创建链接ln –s tools.lnx86 tools（已有不用） 4）接下来配置license：拷贝license.dat到/tools/cds5/share/license目录下。 进入/tools/cds5/share/license 修改license.dat, SERVER localhost ANY 27000, DAEMON cdslmd /tools/cds5/tools/bin/cdslmd (localhost为自己的用户/机器名；/tools/cds5/为安装目的地) 5） chmod 755 license.dat （已有不用） nohup lmgrd –c license.dat >/dev/stty（ license.dat 如果没有在其目录下安装，必须用全名，不一定要） 6）将dfII/samples/local 复制到dfII目录下，并将local中cdsinit 命令为.cdsinit (不要这一步也可以,这一步起到的作用是隐藏) 一个可参考的过程如下：http://hi.baidu.com/fox3940/blog/item/6f641ae9dcd8853eb90e2d34.html directory: /home/thedock/CadenceInstall/IC5033/ISR200406181244/CDROM1/ >cd /home/thedock/CadenceInstall/IC5033/ISR200406181244/CDROM1/ -Execute the installation script from this directory (be carefull with the capitals): > ./SETUP.SH -Specify path of install directory [OR type [RETURN] to exit]: > /Cadence -Directory /Cadence does not exist. Create? [y/n]: > y -Do you want to start softload? [y/n]: > y -Warning: Software administration should not be done as root because it could cause file permissions problems while extracting software Press [Return] to proceed, q to quit : > (just press RETURN to accept to continue) -The available options are: > 1 (Load Available Products) -You must now identify where the CD-ROM is mounted: > 1 (Local (mounted to this machine)) -Specify the CD-ROM mount point: > 2 (Other) -Type the CD-ROM mount point: [ /home/thedock/CadenceInstall/Cadence_Virtuoso_IC5033_lnx86/ISR200406181244/CDROM1 ] > (just press RETURN to accept to continue: the path should be correct at this point) -Do you want to view the README file? Please press y (yes) or n (no) : > y -Follow the standard Cadence installation instructions. Press [Return] to proceed, q to quit : > (just press RETURN to accept to continue) -Where is the installation information? > 4 (Cadence Catalog) -311:Unknown Product Name Removed from QSR. Press [RETURN] to continue: > (just press RETURN to accept to continue) -Go to the end of the products list by pressing the SPACE BAR -Type your choice (a,n,p,1-3,2 5 9 ...): > a (All of the above) -Go to the end of the list of the selected products by pressing the SPACE BAR -Are your selections correct? [y/n] > y -Disk checks successful. The following products will be installed or updated. Just press SPACE BAR to continue. -The following media is required: IC5033 lnx86 P/N 356-70352-0301 CDROM # 1 IC5033 lnx86 P/N 356-70352-0302 CDROM # 2 IC5033 lnx86 P/N 356-70352-0303 CDROM # 3 IC5033 lnx86 ISR 200406181244 CDROM # 1 IC5033 lnx86 ISR 200406181244 CDROM # 2 IC5033 lnx86 ISR 200406181244 CDROM # 3 Press [Return] to proceed, q to quit : > (just press RETURN to accept to continue) -Wait until the next CDROM is asked for (~7 minutes) -Your package selections require IC5033 lnx86 P/N 356-70352-0301 CDROM # 1. > 4 (Change CD-ROM mount point.) -You must now identify where the CD-ROM is mounted. > 1 (Local (mounted to this machine)) -Specify the CD-ROM mount point > 2 (Other) -Type the CD-ROM mount point: [ /home/thedock/CadenceInstall/IC5033/ISR200406181244/CDROM1 ] > /home/thedock/CadenceInstall/IC5033/Base/CDROM1 -CDROM # 2 and CDROM # 3 will be loaded automaticaly. There is nothing to do, just wait. -Verify your installation. The available options are: > 2 (List Installed Products) -Specify the operating system of the products: > 3 (lnx86) -Now you can quit the Cadence IC 5.0.33 installation and begin the Aptivia installation. The available options are: > q (Quit) 最后进行环境的配置： .bashrc文件 为在/etc中的bashrc文件 bsh配置：（注意：$中不要空格，否则报path不对） 在文件内容后加入 export CDSDIR=/Tools/cds5 export CDS_ROOT=/Tools/cds5 export CDS_INST_DIR=/Tools/cds5 export CDS_INSTALL_DIR=/Tools/cds5/tools/dfII/ export CDS_LIC_FILE=/Tools/cds5/share/license/license.dat export PATH=$CDS_ROOT/tools.lnx86/bin:$CDS_INSTALL_DIR/bin:$CDS_ROOT/tools.lnx86/spectre/bin:/usr/sbin:/sbin:$CDS_ROOT/tools.lnx86/plot/bin:$PATH export CDS_Netlisting_Node Analog export Mozilla_Home=/usr/bin/netscape 然后在terminal中直接source： 既 source .bashrc文件 再运行ln -s /usr/bin/mozilla /usr/bin/netscape （运行帮助文件可直接调用浏览器） 〉 icfb &