日本广濑HRS连接器DF11系列图纸
AWG #22 to #26 : 2A
■UL·CSA Safety Standard File No. UL :E52653
CSA :LR95109
(Single Core Punching Full Automatic ID Machine AM700/DF11)
Data storage
Multi-harness Half space
Low cost Setup in 10 minutes
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF11 Series●2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
■Features of DF11 Insulation Displacement Machine
● 5 Major Features of ID Machine AM700/DF11
1. Perform the multi-harness.
2. The setup time has been widely reduced. (10 minutes maximum)
3. Space saving design.
(About half space compared with the conventional machine)
4. Minimize initial cost with low cost.
5. The harness data can be saved in the floppy disk and easily changed.
■Points
Since the DF11 insulation displacemention allows double rows ID with a single part, the harness service is completed with machine connection only.
■Product Specifications
Rating
Current rating (Note 1)
Crimping
Wire size
Operating Temperature Range
Operating Humidity Range
-30 to 85? Note 2 40 to 80%
Insulation Displacement
: 1A
AWG #26
Wire size
Storage Temperature Range
Storage Humidity Range
-10 to 60? Note 3 40 to 70%
Voltage rating
Crimping
250V AC
Insulation Displacement
100V AC
UL-CSA Safety Standard Approved Specification
Rating
Current rating
AWG #22 AWG #24 to #28 AWG #30
: 2A : 1A : 0.5A
Wire size
Voltage rating
30V AC
Item
Specification
Condition
1. Insulation Resistance
1000M ohms min.
500V DC
2. Withstanding voltage
No flashover or insulation breakdown.
650V AC/1 minute
3. Contact Resistance
30m ohms max.
100mA
4. Single Insertion/Extraction Force
0.3N (30gf) min., 4.4N(450gf) max.
Measured by the square steel-made pin of 0.5±0.002mm
5. Vibration
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6. Humidity (Steady state)
Contact resistance: 30m ohms max. Insulation resistance: 500M ohms min.
96 hours at temperature of 40? and humidity of 90% to 95%
7. Temperature Cycle
Contact resistance: 30m ohms max. Insulation resistance: 1000M ohmsmin.
(-55?: 30 minutes ? 5 to 35?: 5 to 15 minutes
(-85?: 30 minutes ? 5 to 35?: 5 to 15 minutes) 5 cycles
8. Durability (Mating/un-mating)
Contact resistance: 30m ohms max.
Tin plated: 30 cycles Gold plated:50 cycles
9. Resistance to Soldering heat
No deformation of components affecting performance.
Flow:
260? for 10 seconds
Manual soldering: 300? for 2 seconds
Reflow:
At the recommended temperature profile
Manual soldering: 300? for 3 seconds
Note 1: Current rating of header is 2A.
Note 2: Includes temperature rise caused by current flow.
Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the Drawings and specifications for a specific part number shown.
104
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF11 Series●2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
■Material
Product Type
Part
MateriaI
Finish
Remarks
Crimping Socket
Insulator
Polyamide
Black
UL94V-0
Crimping Contact for Socket
Contact
Phosphor copper
Tin plated or gold plated
–––––––
ID Socket
Insulator
Polyamide
Black
UL94V-0
Contact
Phosphor copper
Tin plated
–––––––
Receptacle
Insulator
Polyamide
Black
UL94V-0
Contact
Phosphor copper
Tin plated or gold plated
–––––––
Pin Header
Insulator
Polyamide
Black
UL94V-0
Contact
Brass
Tin plated or gold plated
–––––––
SMT Header
Insulator
Polyamide
Beige
UL94V-0
Contact
Brass
Tin plated or gold plated
–––––––
Metal fittings
Brass
Tin plated
–––––––
In-line Plug
Insulator
Polyamide
Black
UL94V-0
In-line Plug Crimping Contact
Contact
Phosphor copper
Tin plated or gold plated
–––––––
In-line Adaptor
Insulator
Polyamide
Black
UL94V-0
Contact
Brass
Tin plated
–––––––
■Ordering Information
●Connector
DF11 - * DS - 2C
: DF11
q Series Name
t Connection Form/Contact Style
C
: Crimping socket
R26 : Insulation Displacemented socket for AWG26
DSA: Straight through hole
DS : Right angle through hole
V
A
: Straight SMT : Adaptor
w Number of Contacts : 4 to 32
e Connector Type
DS : Double Row socket DP : Double Row pin header DEP: Double Row in-line plug
: 2mm
r Contact Pitch
●Contact
DF11 - EP2428PCFA
q Contact Type Blank : For socket
EP : For in-line plug
e Contact Type/Packaging Type
SCF
SC
PCF
PC
: Socket contact, Embossed tape : Socket contact, Bag
: Plug contact, Embossed tape : Plug contact, Bag
w Applicable Wire Size 22 : AWG22 2428 : AWG24 to 28
30 : AWG30
r Plating Type Blank : Tin plated
A : Gold plated
105
Note1: Port 1-piece indicates odd number row, and port 2- pcs. indicate even number row. Note2: Use the dip type header as follows.
· Straight angle type : DF11-*DP-2DSA( 08) · Angle type: DF11-*DP-2DS(24)
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF11 Series●2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
■ID Socket
Photo: Cable connection status
[Specific No.] –* *, (* *)
(05) :Tin plated, 100 pcs. per bag
(25) :Tin plated, Tube packaging
Unit: mm
Part Number
CL No.
Number of Contacts
A
B
Tube Packaging Quantity
DF11- 4DS-2R26(**)
543-0652-0-**
4
6.0
2.0
188
DF11- 6DS-2R26(**)
543-0653-3-**
6
8.0
4.0
140
DF11- 8DS-2R26(**)
543-0654-6-**
8
10.0
6.0
112
DF11-10DS-2R26(**)
543-0655-9-**
10
12.0
8.0
94
DF11-12DS-2R26(**)
543-0656-1-**
12
14.0
10.0
80
DF11-14DS-2R26(**)
543-0657-4-**
14
16.0
12.0
70
DF11-16DS-2R26(**)
543-0658-7-**
16
18.0
14.0
62
DF11-18DS-2R26(**)
543-0659-0-**
18
20.0
16.0
56
DF11-20DS-2R26(**)
543-0660-9-**
20
22.0
18.0
50
DF11-22DS-2R26(**)
543-0661-1-**
22
24.0
20.0
46
DF11-24DS-2R26(**)
543-0662-4-**
24
26.0
22.0
42
DF11-26DS-2R26(**)
543-0663-7-**
26
28.0
24.0
40
DF11-28DS-2R26(**)
543-0664-0-**
28
30.0
26.0
36
DF11-30DS-2R26(**)
543-0665-2-**
30
32.0
28.0
34
DF11-32DS-2R26(**)
543-0666-5-**
32
34.0
30.0
32
Note1: The specific No. (05) item is delivered per bag unit (100 pcs.). Please order products per bag unit.
本文档为【HRS连接器DF11系列图纸】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑,
图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
该文档来自用户分享,如有侵权行为请发邮件ishare@vip.sina.com联系网站客服,我们会及时删除。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。