MPR E-SCAN
HYBRID-DIGITAL REFRACTOMETER
INTRODUCTION
MPR E-SCAN
The Electron Machine Corporation has been designing and manufacturing in-line process
refractometers since the early 1960s. Our focus is providing simple, rugged, and reliable
instruments that provide value over time with accurate measurement, minimal mainte-
nance, and long service life.
The MPR E-Scan is a hybrid-digital critical angle refractometer. It is used to measure the
refractive index of process fluids and may be used as an error indicator or an integral part
of a complete process control system.
The MPR E-Scan is calibrated and temperature compensated to your process specifica-
tions. It is ready for installation and immediate use when received. Calibration proce-
dures are available to change system parameters and allow the refractometer to measure
different process fluids.
HYBRID-DIGITAL REFRACTOMETER
HOW IT WORKS: HYBRID-DIGITAL MEASUREMENT
Energy radiated from the LED passes through the
prism surface to be reflected off a mirror to the
prism-to-process interface. The light reaching this
interface intersects the same interface over a series of
angles specifically chosen to include the critical angle
(Ic) for the process being measured. Light intersect-
ing the interface at an angle greater than critical angle
is refracted into the solution. Light intersecting the
interface at less than critical angle is reflected up out
of the prism up to the digital CCD linear array to be
scanned.
The resolution of each sensing head is maximized by
selecting the angle of the prism for the measurement
and temperature range of the process.
The MPR E-Scan refractometer utilizes a hybrid-digital measurement principle. The
CCD (charged coupled device) in the sensing head digitally measures the refractive index
of the process. Any change in critical angle changes the ratio of light to dark periods.
The digital measurement is temperature compensated and converted to a variable voltage
by rugged electronic devices in the sensing head. This allows the relatively sensitive
micro-processor driven devices to be located in the electronics console where more pro-
tection from the process can be provided. The signal is then further enhanced and
displayed as a reading in refractive index, Brix, solids, percent, or other measurement
unit. This combination of state-of-the-art micro-processors combined with tried-and-true
analog components provides a high-level of accuracy along with the rugged dependabil-
ity required for years of use when installed in harsh industrial environments.
CCD Array
LED
Lens
Prism
Refracted
Light Rays
Ic
CCD Array
Signal showing change in pulse width caused by concentration change.
E-SCAN CONSOLE
The console is constructed of molded fiberglass polyester for maximum protection in
harsh environments. It is rated NEMA 4X and can be installed outdoors without any
additional protection. The front panel consists of a high-resolution, daylight readable,
color TFT-LCD display and a 20-button touch pad. This forms the user interface and
allows easy navigation through the various menu options. The entire door assembly can
be removed and replaced easily to minimize down-time in the event of a failure or to
allow upgrading the electronics in the future.
STANDARD E-SCAN FEATURES
· Color TFT-LCD display with LED backlight
and 640x480 pixels
· Menu-driven software with diagnostics
· Factory calibrated and delivered ready for
installation
· Sensing head configured and manufactured
for your specific application for maximum
resolution
· Multi-range capability
· NEMA 4X fiberglass electronics console
· NEMA 4X all stainless steel sensing head
with sapphire prism
· (2) Input & (6) Output relays configurable for
controlling alarms and cleaning solenoids
· 4-20mA (non-isolated) and RS-232 outputs
SENSING HEAD OPTIONS
OPTIONAL E-SCAN FEATURES
· Flush panel mounting of console
· Vortex cooled electronics console
· Measurement & Temperature PID Control
· Multi-range calibration as requested
· Dual sensing head capability
· Intrinsically safe sensing head
· Air-purging of console and sensing head
(Type X and Y/Z)
Standard Extended
· Standard or Extended Probes
· Intrinsically Safe
· Severe Duty for installations with
extreme vibration
· Various alloys and elastomers for
wetted parts (316 & 2205 S/S std.)
· S/S NEMA 4X cable connector
OPTIONAL OUTPUTS
· Printer Output
· Remote Display
· RS-422/485
· HART® Protocol Interface
· Isolated 4-20mA for Measurement
· Isolated 4-20mA for Temperature
· Isolated or non-isolated 4-20mA
for control
1.3
1.35
1.4
1.45
1.5
1.55
0 10 20 30 40 50 60 70 80 90 100
Sucrose
Ethanol
NaOH
HCl
H2SO 4
CONCENTRATION
RE
FR
AC
TI
VE
IN
DE
X
APPLICATIONS
The use of the MPR E-Scan refractometer on your process guarantees a more consistent
quality product. This in turn leads to lower production costs. In today’s competitive
marketplace quality and cost are the key discriminators to greater profits. Depend on our
over 40 years of experience in process refractometers to assist in application details for
your process.
PULP & PAPER INDUSTRY
FOOD INDUSTRY
CHEMICAL INDUSTRY
Black Liquor
Green Liquor
Red Liquor
Coatings
Resin
Tall Oil
Jams & Jellies
Milk
Fruit Juices
Sucrose
Fructose
Dextrose
Soft Drinks
Beer
Tomato Paste
Sodium Hydroxide
Sodium Carbonate
Urea
PVOH
Sulphuric Acid
Hydrochloric Acid
Phosphoric Acid
DMAC
Oleum
Glycol
Ethanol
PVA
Black
Liquor
TYPICAL PROCESS ADAPTERS
Vessel or Tank Mount
The Electron Machine Corporation supplies adapters to complete the installations of the
refractometer to your process. These adapters are available in standard or custom sizes.
Some common types include tubing, standard pipeline and sanitary adapters, vessel
mounts, and special isolation valve adapters that allow the refractometer to be removed
from an active pipeline without any special tools. Materials and special alloys are avail-
able to suit your process requirements.
The adapters can also be supplied with a built-in prism wash jet that can be automatically
activated by the refractometer program. The prism wash is user variable and the refracto-
Isolation Valve
Sanitary Spool Flanged Spool
meter will supervise the proper operation of this
cycle.
For difficult applications EMC has designed special
cleaning systems and adapters. Consult the factory
or local representative for assistance in your selec-
tion.
ABOUT US
Founded in 1946, Electron Machine Corporation designs and manufactures industrial
measuring and control instrumentation in Umatilla, FL, U.S.A. The successful applica-
tion of our refractometers to many process streams has made it the specified standard in
the pulp & paper, food, and chemical processing industries.
A worldwide network of experienced sales and service personnel assures economical
process measurement and control with years of trouble-free service.
WARRANTY
Electron Machine Corporation warrants that the equipment manufactured by EMC is free
of defects in material and workmanship. Should such a fault appear within two years of
date of shipment from our factory, the Electron Machine Corporation will repair or
replace the defective part upon its prepaid return to Umatilla, Florida, U.S.A. This war-
ranty does not apply to equipment which has been tampered with or abused.
Additionally, a process performance guarantee ensures that the MPR E-Scan will meet or
exceed written specifications.
SERVICE
The Electron Machine Corporation strives to maintain the best service possible for our
customers. A 24 hour/day, 7 days/week technical support telephone line is monitored by
one of our factory trained service personnel for fast help in emergency situations. Addi-
tionally, the services of our highly experienced field engineers are also available at stan-
dard rates for on-site repairs and training.
Corresponds to accuracy
SPAN Con�gured for speci�c application for max. resolution
RESPONSE TIME 0.25 seconds to 3 minutes
PROCESS TEMPERATURE Up to 150°C (300°F) without air purge
AMBIENT TEMPERATURE
DISPLAY
Color TFT-LCD with LED backlighting
640 X 480 Pixel, daylight-readable
INTERCONNECTING
CABLE
6M (20FT) standard
300M (1,000FT) maximum
SENSING HEAD
WETTED MATERIALS
2205 Duplex S/S, Sapphire, PEEK®, VITON®
STANDARD OUTPUTS
POWER 85-260Vac, 50/60Hz, 50VA
E-SCAN HYBRID-DIGITAL REFRACTOMETER SPECIFICATIONS
(other alloys & elastomers available on request)
4-20mA non-isolated, 0-10 Vdc non-isolated, RS-232
P.O. Box 2349 · 15824 CR 450 West · Umatilla, FL 32784-2349 · (352) 669-3101 · Fax (352) 669-1373
www.electronmachine.com · sales@electronmachine.com
REPEATABILITY/STABILITY
ACCURACY 0.05 BRIX (.000075 R.I.) or 0.5% of span±
Sensing Head: up to 52°C (125°F) without air purge
Console: up to 50°C (120°F) without vortex cooled console
(6) con�gurable output relays (A/C or D/C)
(2) con�gurable input relays (A/C or D/C)
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
本文档为【MPR_E-Scan在线酸浓分析仪】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑,
图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
该文档来自用户分享,如有侵权行为请发邮件ishare@vip.sina.com联系网站客服,我们会及时删除。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。