福建省内自驾7条经典线路

福建省内自驾7条经典线路 总结各种旅游方式，如果要说自驾游最大的特点，那就是自由。是的，想走就走，想停就停，随心所欲，这就是自驾游的魅力。针对春节期间不长的假期和实际需要，我们推荐还是选择在省内进行自驾游，在春 节抽出两三天时间，和家人一起出游，那种温馨的感觉甚至与美景无关。福建拥有丰富的旅游资源，要山有山，要海有海，我们为有车族精选出省内的7条自驾游线 路供参考。 线路一:泉州山区放松游 时间:2天 关键点:永春牛姆林，安溪清水岩 特色:行程轻松、特产丰富 适合人群:一家三口(或五口) 参考费用:800元(以一车四人计) 行车路线:泉州—南安—安溪—湖头镇—横口镇(牛姆林)—湖头镇—蓬莱镇(清水岩) 具体行程:从泉州出发，走南环路往南安方向一 直走，过南安，到安溪(约60公里)。继续走省道经过湖头镇、剑斗镇、横口镇，再往北走2公里就到了牛姆林(约130公里，全程需4个小时)，晚可住牛姆 林。返回湖头镇(一个半小时)，往金谷镇，转县道到达蓬莱镇，清水岩就在镇上。 景点推荐:牛姆林是在闽南地区保留最完好、最具特色的原始森林群体，被誉为闽南的西双版纳。景区还有高空索道、滑草、射箭等游玩项目。清水岩是享誉海内外的朝圣之地。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 自驾游提醒: 住:冬天的牛姆林比较寒冷，但是能看到特别的风景，适合带上孩子游玩。 吃:永春的小吃很多，农家菜也别具风味，特别值得推荐的是榜舍龟、石鼓白鸭汤和甜甜的白米曲酒。安溪有名的特产除了茶叶，还有湖头米粉、工艺竹编、藤编等。 线路二:登顶泉州最高峰 时间:3天 关键点:德化九仙山、石牛山、岱仙瀑布 特色:考验车技的线路，夜宿泉州最高点 适合人群:年轻夫妻或情侣 参考费用:1200元(以一车四人计) 行车路线:泉州—丰州镇—洪濑镇—永春县—德化县—赤水镇(九仙山)—南埕镇(石牛山)—岱仙瀑布 具体行程:从泉州北门出发，走省道，途经丰州 镇、洪濑镇、梅山镇、永春县，到达德化县城(约110公里)。继续往西走30多公里，到达赤水镇，吃午饭。中午直接上九仙山，上山路程有10公里，晚上住 在山顶，有机会可以看到云海哦;回德化县城后往东走，途经赤水镇、南埕镇(四五十公里)，然后就顺着旅游路线牌上石牛山(约22公里)，下山，往水口镇方 向走，距离水口镇还有约2公里，就可以看到岱仙瀑布了。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 景点推荐:九仙山是泉州海拔的最高点，山上有 一个气象站，也可提供住宿及餐饮。春节期间上山，很有可能遇上下雪或雾凇，对很少见到下雪的泉州车友来说，是很难得的机会，此外，九仙山的云海也非常壮 观。石牛山上很多岩石都有神奇的传说，且山洞也很多，可以四处转悠。而岱仙瀑布为华东地区落差最大的瀑布之一。 自驾游提醒: 住:如果选择在九仙山顶住宿，最好多穿衣服，带上手套和睡袋，这个季节山上的气温肯定低于0?。 行:上石牛山的山路有22公里，都是急弯，而且路面只有4米宽，海拔又有1700多米，所以很陡峭，车主一定要小心。而前往九仙山顶的路面更加狭窄，还有可能结冰，一定要小心驾驶。休闲购物的话，德化的陶瓷和山上的土货当然不能错过。 线路三:青山绿水自在行 时间:3天 关键点:永泰青云山、闽侯十八重溪瀑布 特色:游山看瀑布，一举两得 适合人群:皆可，但不推荐体力不佳的老年人前往 参考费用:1500元(以一车四人计) 行车路线:泉州—莆田(下高速)—永泰县—岭路乡(青云山)—赤壁—吕溪龙山—闽侯南通(十八重溪) appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 具体行程:泉州上高速，莆田下高速(90公里)。走324国道穿过莆田市区，往福州方向，经过西天尾镇、秋芦镇、白沙镇、庄边镇，进入永泰县，直接到岭路乡 (70公里)。青云山风景区就在岭路乡，晚上可住宿永泰县城;从永泰县城出发，走省道往闽侯方向，一路经过赤壁、吕溪龙山，进入闽侯南通的十八重溪，可住 南通镇区。 景点推荐:青云山主要是看瀑布，其中比较有名的是落差80多米的青龙瀑布。还有一线天、白马双溪、白马瀑布、水帘仙境等经典景点。赤壁景区也是看瀑布，从永 泰到闽侯一路上都是景点，可以一路玩下去。闽侯的十八重溪是现在很多人特别喜欢去的地方，春天去可以垂钓。有些户外运动爱好者来这里组织溪降等运动。 自驾游提醒: 游:永泰在很小范围内就聚集了许多好玩的景点，有探险精神和时间的车主可以慢慢探索。两三天只能选择重要景点，由于其景点比较分散，最好请导游指引。 吃:在永泰不要忘了带些蜜饯回来配茶，永泰的李干百吃不厌。 线路四:上山看奇石 渔排品海鲜 时间:3天 关键点:三都澳、杨家溪、太姥山 特色:综合山景和海景，还有海鲜大餐可以品尝 适合人群:皆可 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 参考费用:2500元(以一车四人计) 行车路线:泉州—福州—宁德三都澳(下高速)—霞浦县杨家溪—太姥山 具体行程:从泉州华大高速路口上高速，往福州 方向一直走，到宁德高速公路“三都澳出口”下高速;赴三都澳礁头码头(水泥路面，约8公里)，晚上可住三都澳;后开车赴杨家溪，牙城下高速(高速100公 里+省道约16公里)，还需要穿过一大段乡间小路。从杨家溪去太姥山，在牙城上高速，经秦屿镇上太姥山，可住宁德市区。 景点推荐:三都澳不仅是著名的深水避风良港， 山海兼备风光旖旎。景区周围有著名的斗帽风景区及“将军顶”、“笔架山”、“海上仙猿”等风景名胜。在三都岛可以看到曾经的西班牙哥特式天主教堂、修女 院;春天的杨家溪溪水饱满，绿树抽芽，这个季节的杨家溪最美。太姥山号称“海上仙都”，以奇石闻名。 自驾游提醒: 吃:到三都澳不可不吃海鲜，在海上渔排餐厅可以吃到人工养殖的海鲜珍品大黄鱼及各种时令海鲜。 行:下高速进入霞浦县城后，一路都有风景区的路线提示，照着开就可以了。但是要穿过一个比较繁荣的市场，然后走的都是比较狭窄的乡间小路，所以这段路车子要小心慢行。 线路五:龙岩红色怀旧游 时间:3天 关键点:冠豸山、古田会议旧址 特色:欣赏丹霞地貌、缅怀革命先烈 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 适合人群:皆可，特别适合与长辈同往 参考费用:2500元(以一车四人计) 行车路线:泉州—龙岩—雁石镇(龙洞、天宫山)—连城(冠豸山)—培田(古民居)—古田会议旧址—小池镇(上高速) 具体行程:泉州上高速，到龙岩下高速(200 公里);下了高速就进入往漳平方向的省道，走到雁石镇，然后顺着旅游路标再走20多公里到龙洞。天宫山与龙洞方向相对，从雁石镇往左走几公里路就进入天宫 山景区，上山15公里，可住龙岩市区。从龙岩出发，走319国道到达连城冠豸山(160公里，需2个多小时)。从连城出发，途中可以拐到文坊、培田，看看 培田古民居。然后拐出来走319国道，路过朋口镇、新泉镇、庙前镇，到了庙前镇可以拐进古田镇看古田会议旧址，还是原路返回走319国道，可住连城县城。 景点推荐:龙洞是个天然溶洞，洞中有山，有 水，大小石钟乳千姿百态。天宫山是闽西著名的佛教圣地，海拔有2000多米，爬到主峰后就感觉像站在云端上，漫步寺中，晨钟暮鼓、梵音缭绕。冠豸山属于丹 霞地貌，山虽不高，风景倒还秀丽奇特，有号称阳刚天下第一的石柱和阴柔第一的石门湖石缝。 自驾游提醒: 游:冠豸山的景点很多，最好请导游指引并跟导游讲好，不然一些风景很好的险峰导游会故意省略。最好是先去后山坐船游石门湖，再登山从前山下，这样不会拥挤，不需要等船。中午湖上有阳光，傍晚再到山上看日落，逆游冠豸乐趣多。 吃、住:如果时间比较多，晚上可以住在天宫山上。山上寺庙有很多客房供游人香客住宿，价格很便宜。 线路六:沙县美食之旅 时间:4天 关键点:沙县、大金湖、桃源洞 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 特色:品尝真正的沙县小吃 欣赏震撼的丹霞风光 适合人群:皆可，特别适合喜好美食的朋友 参考费用:2500元(以一车四人计) 行车路线:泉州—沙县—将乐—泰宁—永安—泉州 具体行程:从泉州清上高速，到达三明下高速 (约3个小时)。走205国道到沙县，游览淘金山，品尝真正的沙县小吃，晚住沙县;从沙县走省道，行车3个多小时，到达将乐，再前往泰宁上清溪，行车需5 个小时，在上清溪漂流返回泰宁，前往大金湖，约30公里路，晚住泰宁。从泰宁出发，万全镇、黄潭镇、南口镇、白莲镇、明溪县、莘口镇，然后走205国道， 直接到永安市，桃源洞在城北205国道旁，约9公里。从永安走205国道，到三明上高速可返回泉州。 景点推荐:除了拌面、扁食，纯正的沙县小吃可 谓数不胜数。泰宁上清溪漂流，曲折穿梭、丹崖幽林，很原始、纯净。大金湖的一步一景也名不虚传。从泰宁到永安的这条路是特意挑选的，一路等于是沿河而行， 路上景色好，有十几座大大小小的发电站，在明溪可以看到华东落差最大的水库。 自驾游提醒: 行:在上清溪漂流时，只能把车子放在漂流口， 漂完后，尽头离出发的地方有20多公里，如果是集体出游，可以派几个人打的回去把车开到漂流尽头。游大金湖也是一样，在快接近下码头时船主一般会建议车主 雇的士或摩托车返回上码头取车。沙县到将乐这段路不好走，旁边在建高速公路，破坏了原来的路面。白莲镇到明溪县的路也不好。 吃:沙县城里有一个专门的小吃一条街，就算是一样的拌面和扁食，那味道也是绝对和街边沙县小店里的不一样。 线路七:浪漫温泉爱情旅程 ?厦门翠丰温泉 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening 时间:建议当天返回 厦门翠丰温泉位于厦门同安，和泉州很近，从南安走省道或者走高速公路都很便利，建议当天就可往返，或者到厦门过夜。 ?青云山御温泉 时间:2天 青云山御温泉酒店位于永泰青云山，整个建筑物 群依山就势、错落有序，周围是青山绿水、溪涧瀑布、云雾环绕，充分融合自然生态环境，营造了返朴归真的意蕴。青云山御温泉酒店周围最具特色的是云天石廊峡 谷、白马峡谷瀑布、九天瀑布水帘宫、刺桫椤神谷四大风景区。泡温泉之余还能游览景区，可谓一举两得。 ?厦门日月谷温泉 时间:2天 厦门日月谷温泉位于厦门市海沧区东孚镇汤岸，324国道与孚莲路交汇处，交通便捷。是省内较早的一家综合温泉主题公园。还可与厦门岛内的休闲游相结合，安排两天的行程。 ?云霄云顶温泉 时间:3天 云霄云顶温泉是目前比较热门的温泉，主要吸引潮汕方向的自驾车友，对潮汕美食感兴趣的话，可以把云霄云顶温泉和潮汕美食之旅相结合，安排三天的行程。 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, and should not be greater than 4 mm. Depth of undercut should be less than or equal to 0.5 mm, total length of the welds on both sides undercut not exceed 10% of the weld length, and long continuous should not be greater than 100 mm. Wrong side should be less than or at 0.2T, and should not be greater than 2 mm (wall thickness mm t) incomplete or not allow 7.5 7.5.1 installation quality process standards of the electrical enclosure Cabinet surface is clean, neat, no significant phenomenon of convex, close to nature, close the door. 7.5.2 Cabinet Cabinet face paints no paint, returned to rusted, consistent color. 7.5.3 uniform indirect gap from top to bottom, slot width <1.5mm 7.5.4 adjacent Cabinet surface roughness is 0. 7.5.5 the cabinets firmly fixed, crafts beautiful. 7.5.6 Cabinet surface gauge, switch cabinet mark clear, neat, firm paste. 7.5.7 Terminal row of neat, is reliable, the appearance is clean and not damaged. 7.5.8 cables neat and clean, solid binding, binding process in appearance. 7.5.9 the first cable production firm, crafts beautiful, clear signage does not fade. 7.5.10 fireproof plugging tight, no cracks and pores. 7.6 7.6.1 of the standard electrical wiring quality technology cable a, the multi-core wire bunch arrangement should be parallel to each other, horizontal wire harness or wire should be perpendicular to the longitudinal multi-core wire bunch. The distance between the wire harness and wire harness symmetry, and as close as possible. B-core wiring harness into round, multi-core wire bunch used g wire binding, fastening