DEUTSCHE NORM
{
© No part of this standard may be reproduced without the prior permission of
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,
has the exclusive right of sale for German Standards (DIN-Normen).
June 2005
DIN EN 10293
English price group 11
www.din.de
www.beuth.de 10.05 9651147
Continued overleaf.
Document comprises 18 pages.
Steel castings for general engineering uses
English version of DIN EN 10293
Stahlguss für allgemeine Anwendungen
National foreword
This standard has been prepared by ECISS/TC 31 ‘Steel castings’ (Secretariat: France).
The responsible German body involved in its preparation was the Normenausschuss Eisen und Stahl (Steel
and Iron Standards Committee), Technical Committee 11 Stahlguss.
Amendments
This standard differs from DIN 1681, June 1985 edition, DIN 17182, May 1992 edition, and DIN 17205, April
1992 edition, as follows:
a) DIN 1681:1985-06
1) Steel grades GS200 (1.0449) and GS240 (1.0455) have been included.
2) Steel grade GS – 52 (1.0552) has been dropped.
3) The steel names have been changed as follows (with the material numbers left unchanged):
Designation as in DIN EN 10293 Designation as in DIN 1681
Name Material number Name
Material
number
GE200 1.0420 GS – 38 1.0420
GE240 1.0446 GS – 45 1.0446
GE300 1.0558 GS – 60 1.0558
4) Details regarding chemical composition, mechanical properties, heat treatment and welding oper-
ations have been amended.
5) The standard has been editorially revised.
ICS 77.140.80 This standard, together with
DIN EN 10213-1 and
DIN EN 10213-3,
January 1996 editions,
supersedes DIN 17182,
May 1992 edition, DIN 1681,
June 1985 edition, and
DIN 17205, April 1992 edition.
labe
Diese Kopie ..., en
b) DIN 17182:1992-05
1) Steel grades GS – 8 Mn 7 (1.5015), GS – 8 MnMo 7 4 (1.5430) and GS 13 MnNi 6 4 (1.6221) have been
dropped.
2) The steel names and material numbers have been changed as follows:
Designation as in DIN EN 10293 Designation as in DIN 17182
Name Material number Name
Material
number
G17Mn5 1.1131 GS – 16 Mn 5 1.1131
G20Mn5 1.6220 GS – 20 Mn 5 1.1120
3) Details regarding chemical composition, mechanical properties, heat treatment and welding opera-
tions have been amended.
4) The standard has been editorially revised.
c) DIN 17205:1992-04
1) Steel grades GS – 35 CrMoV 10 4 (1.7755), GS – 25 CrNiMo 4 (1.6515) and GS – 33 NiCrMo 7 4 4
(1.6740) have been dropped.
2) 16 additional steel grades have been included.
3) The steel names and material numbers have been changed as follows:
Designation as in DIN EN 10293 Designation as in DIN 17205
Name Material number Name
Material
number
G28Mn6 1.1165 GS – 30 Mn 5 1.1165
G26CrMo4 1.7221 GS – 25 CrMo 4 1.7218
G34CrMo4 1.7230 GS – 34 CrMo 4 1.7220
G42CrMo4 1.7231 GS – 42 CrMo 4 1.7225
G30CrMoV6-4 1.7725 GS – 30 CrMoV 6 4 1.6582
G35CrNiMo6-6 1.6579 GS – 34 CrNiMo 6 1.6582
G32NiCrMo8-5-4 1.6570 GS – 30 NiCrMo 8 5 1.6570
4) Details regarding chemical composition, mechanical properties, heat treatment and welding opera-
tions have been amended.
5) The standard has been editorially revised.
Previous editions
DIN 1681: 1925-04, 1929-07, 1942xx-03, 1967-06, 1985-06; DIN 17182: 1985-06, 1992-05;
DIN 17205: 1992-04.
Page 2
DIN EN 10293:2005-06
English version
ICS 77.140.80
Management Centre: rue de Stassart, 36 B-1050 Brussels
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
© 2005. CEN – All rights of exploitation in any form and by any means
reserved worldwide for CEN national members.
Ref. No. EN 10293:2005 E
ÈÉË
EN 10293
April 2005
Steel castings for general engineering uses
Aciers moulés d’usage général Stahlguss für allgemeine Anwen-
dungen
This European Standard was approved by CEN on 2005-02-14.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national stand-
ards may be obtained on application to the Management Centre or to any CEN
member.
The European Standards exist in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a
CEN member into its own language and notified to the Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,
Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, and
the United Kingdom.
Page 2
EN 10293:2005
Page 3
EN 10293:2005
Page 4
EN 10293:2005
Page 5
EN 10293:2005
Page 6
EN 10293:2005
P
ag
e 7
E
N
10293
:20
0
5
Page 8
EN 10293:2005
P
ag
e 9
E
N
10293
:20
0
5
P
ag
e 10
E
N
10293
:20
0
5
P
ag
e 11
E
N
10293
:20
0
5
P
ag
e 12
E
N
10293
:20
0
5
Page 13
EN 10293:2005
Page 14
EN 10293:2005
Page 15
EN 10293:2005
Page 16
EN 10293:2005
Beuth Verlag GmbH
2005-08-30T10:39:23+0200
10787 Berlin
DIN Deutsches Institut fuer Normung e. V.
Dokument ist zertifiziert
本文档为【DIN_EN_10293-2005_铸钢件材质标准】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑,
图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
该文档来自用户分享,如有侵权行为请发邮件ishare@vip.sina.com联系网站客服,我们会及时删除。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。