CAD基本操作命令

CAD基本操作命令 • L, *LINE 直线 ML, *MLINE 多线(创建多条平行线) PL, *PLINE 多段线 PE, *PEDIT 编辑多段线 SPL, *SPLINE 样条曲线 SPE, *SPLINEDIT 编辑样条曲线 XL, *XLINE 构造线(创建无限长的线) A, *ARC 圆弧 C, *CIRCLE 圆 DO, *DONUT 圆环 EL, *ELLIPSE 椭圆 PO, *POINT 点 DCE, *DIMCENTER 中心标记 POL, *POLYGON 正多边形 REC, *RECTANG 矩形 REG, *REGION 面域 H, *BHATCH 图案填充 BH, *BHATCH 图案填充 -H, *HATCH HE, *HATCHEDIT 图案填充...(修改一个图案或渐变填充) SO, *SOLID 二维填充(创建实体填充的三角形和四边形) *revcloud 修订云线 *ellipse 椭圆弧 DI, *DIST 距离 ME, *MEASURE 定距等分 DIV, *DIVIDE 定数等分 DT, *TEXT 单行文字 T, *MTEXT 多行文字 -T, *-MTEXT 多行文字(命令行输入) MT, *MTEXT 多行文字 ED, *DDEDIT 编辑文字、标注文字、属性定义和特征控制框 ST, *STYLE 文字样式 B, *BLOCK 创建块... -B, *-BLOCK 创建块...(命令行输入) I, *INSERT 插入块 -I, *-INSERT 插入块(命令行输入) W, *WBLOCK “写块”对话框(将对象或块写入新图形文件) a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel -W, *-WBLOCK 写块(命令行输入) AR, *ARRAY 阵列 -AR, *-ARRAY 阵列(命令行输入) BR, *BREAK 打断 CHA, *CHAMFER 倒角 CO, *COPY 复制对象 CP, *COPY 复制对象 E, *ERASE 删除 EX, *EXTEND 延伸 F, *FILLET 圆角 M, *MOVE 移动 MI, *MIRROR 镜像 LEN, *LENGTHEN 拉长(修改对象的长度和圆弧的包含角) O, *OFFSET 偏移 RO, *ROTATE 旋转(绕基点移动对象) S, *STRETCH 拉伸 SC, *SCALE 缩放 TR, *TRIM 修剪 *EXPLODE 分解 DAL, *DIMALIGNED 对齐标注 DAN, *DIMANGULAR 角度标注 DBA, *DIMBASELINE 基线标注 DCO, *DIMCONTINUE 连续标注 DDI, *DIMDIAMETER 直径标注 DED, *DIMEDIT 编辑标注 DLI, *DIMLINEAR 线性标注 DOR, *DIMORDINATE 坐标标注 DRA, *DIMRADIUS 半径标注 LE, *QLEADER 快速引线 D, *DIMSTYLE 标注样式管理器 DST, *DIMSTYLE 标注样式管理器 STA, *STANDARDS 标准 excel标准偏差excel标准偏差函数exl标准差函数国标检验抽样标准表免费下载红头文件格式标准下载 配置(CAD标准) DRE, *DIMREASSOCIATE 重新关联标注 DDA, *DIMDISASSOCIATE 删除选定择标注的关联性 LA, *LAYER 图层特性管理器 -LA, *-LAYER 图层特性管理器(命令行输入) LW, *LWEIGHT 线宽设置... a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel LT, *LINETYPE 线型管理器 -LT, *-LINETYPE 线型管理器(命令行输入) LTYPE, *LINETYPE 线型管理器 -LTYPE, *-LINETYPE 线型管理器(命令行输入) LINEWEIGHT, *LWEIGHT 线宽 LTS, *LTSCALE 设置全局线型比例因子 TOR, *TORUS 圆环(三维) WE, *WEDGE 楔体 3P, *3DPOLY 三维多段线 3F, *3DFACE 三维面 IN, *INTERSECT 交集 UNI, *UNION 并集 SU, *SUBTRACT 差集 EXT, *EXTRUDE 拉伸(三维命令) REV, *REVOLVE 旋转(通过绕轴旋转二维对象来创建实体) HI, *HIDE 消隐 SHA, *SHADEMODE 着色 SL, *SLICE 剖切(用平面剖切一组实体) SEC, *SECTION 切割(用平面和实体的交集创建面域) INF, *INTERFERE 干涉 3A, *3DARRAY 三维阵列 3DO, *3DORBIT 三维动态观察 ORBIT, *3DORBIT 三维动态观察器 RPR, *RPREF 渲染系统配置 RR, *RENDER 渲染 DC, *ADCENTER 设计中心 ctrl+2 ADC, *ADCENTER 设计中心 DCENTER, *ADCENTER 设计中心 MA, *MATCHPROP 特性匹配 TP, *TOOLPALETTES 工具选项板 ctrl+3 CH, *PROPERTIES 特性 ctrl+1 -CH, *CHANGE 修改现有对象的特性 PR, *PROPERTIES 特性 ctrl+1(控制现有对象的特性) PROPS, *PROPERTIES 特性 ctrl+1(控制现有对象的特性) MO, *PROPERTIES 特性 ctrl+1(控制现有对象的特性) PRCLOSE, *PROPERTIESCLOSE (关闭“特性”选项板) PRE, *PREVIEW 打印预览 PRINT, *PLOT 打印 ctrl+p TO, *TOOLBAR 工具栏/自定义(显示、隐藏和自定义工具栏) a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel Z, *ZOOM 实时缩放 P, *PAN 实时平移 -P, *-PAN 实时平移(命令行输入) OS, *OSNAP 对象捕捉设置 -OS, *-OSNAP 对象捕捉设置(命令行输入) SN, *SNAP 捕捉(规定光标按指定的间距移动) PU, *PURGE 清理(删除图形中未使用的命名项目，例如块定义和图层) -PU, *-PURGE 清理(命令行输入) R, *REDRAW (刷新当前视口中的显示) RA, *REDRAWALL 重画 RE, *REGEN 重生成 REA, *REGENALL 全部重生成 REN, *RENAME 重命名 -REN, *-RENAME 重命名(命令行输入) AA, *AREA 面积 AL, *ALIGN 对齐 AP, *APPLOAD 加载应用程序... ATT, *ATTDEF 定义属性... -ATT, *-ATTDEF 定义属性...(命令行输入) ATE, *ATTEDIT 单个...(编辑块插入上的属性) -ATE, *-ATTEDIT 单个...(命令行输入) ATTE, *-ATTEDIT 单个...(命令行输入) BO, *BOUNDARY 边界创建... -BO, *-BOUNDARY 边界创建...(命令行输入) CHK, *CHECKSTANDARDS 检查...(检查当前图形的标准冲突情况 ) COL, *COLOR 颜色...(设置新对象的颜色) COLOUR, *COLOR DBC, *DBCONNECT 数据库连接管理器 DOV, *DIMOVERRIDE 替代 DR, *DRAWORDER 显示顺序 DS, *DSETTINGS 草图设置 DV, *DVIEW 定义平行投影或透视视图 FI, *FILTER 为对象选择创建可重复使用的过滤器 G, *GROUP “对象编组”对话框 -G, *-GROUP “对象编组”对话框(命令行输入) GR, *DDGRIPS 选项(...选择) a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel IAD, *IMAGEADJUST 图像调整(控制图像的亮度、对比度和褪色度) IAT, *IMAGEATTACH 附着图像(将新的图像附着到当前图形) ICL, *IMAGECLIP 图像剪裁(为图像对象创建新的剪裁边界) IM, *IMAGE 图像(管理图像) -IM, *-IMAGE 图像(命令行输入) IMP, *IMPORT 输入 IO, *INSERTOBJ OLE对象 LI, *LIST 列表(显示选定对象的数据库信息) LO, *-LAYOUT 新建布局 LS, *LIST 列表(显示选定对象的数据库信息) MS, *MSPACE 从图纸空间切换到模型空间视口 MV, *MVIEW 创建并控制布局视口(在布局选项卡上工作时) OP, *OPTIONS 选项...(自定义设置) PA, *PASTESPEC “选择性粘贴”对话框(插入剪贴板数据并控制数据格式) PARTIALOPEN, *-PARTIALOPEN (将选定视图或图层的几何图形加载到图形中) PS, *PSPACE 在布局选项卡上工作时，AutoCAD 从模型空间切换到图纸空间 PTW, *PUBLISHTOWEB 网上发布... SCR, *SCRIPT 运行脚本...(从脚本文件执行一系列命令) SE, *DSETTINGS 草图设置(指定捕捉模式、栅格、极轴追踪和对象捕捉追踪的设置) SET, *SETVAR 设置变量(列出系统变量或修改变量值) SP, *SPELL 拼写检查...(检查图形中的拼写) TA, *TABLET 数字化仪(校准、配置、打开和关闭已连接的数字化仪) TH, *THICKNESS 设置当前的三维厚度(系统变量) TI, *TILEMODE 将“模型”选项卡或最后一个布局选项卡置为当前(系统变量) TOL, *TOLERANCE 公差 UC, *UCSMAN 显示ucs对话框 UN, *UNITS 单位...(控制坐标和角度的显示格式并确定精度) -UN, *-UNITS 单位...(命令行输入) V, *VIEW 命名视图...(保存和恢复命名视图) -V, *-VIEW 命名视图...(命令行输入) VP, *DDVPOINT 视点预置...(设置三维观察方向) -VP, *VPOINT X, *EXPLODE 输出...(以其他文件格式保存对象) EXIT, *QUIT 退出 EXP, *EXPORT 输出 XA, *XATTACH 附着外部参照(将外部参照附着到当前图形) XB, *XBIND 外部参照绑定(绑定一个或多个在外部参照里的命名对象定义到当前的图形 ) -XB, *-XBIND 外部参照绑定(命令行输入) XC, *XCLIP 外部参照剪裁(定义外部参照或块剪裁边界，并设置前剪裁平面或后 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel 剪裁平面) XR, *XREF 外部参照管理器(控制图形文件的外部参照) -XR, *-XREF 外部参照管理器(命令行输入) QDIM 快速标注 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel