MP3、U盘故障”无法识别的USB设备”处理方法

MP3、U盘故障”无法识别的USB设备”处理 方法 快递客服问题件处理详细方法山木方法pdf计算方法pdf华与华方法下载八字理论方法下载 MP3、U盘故障:无法识别的USB设备:处理方法 "无法识别的USB设备"处理方法 1.前置USB线接错。当主板上的USB线和机箱上的前置USB接口对应相接时把正负接反就会发生这类故障，这也是相当危险的，因为正负接反很可能会使得USB设备烧毁。 所以尽量采 也少用延长线.也可能是断口有问题,换个USB端口看下. 用机箱后置的USB接口, 2.USB接口电压不足。当把移动硬盘接在前置USB口上时就有可能发生系统无法识别出设备的故障。原因是移动硬盘功率比较大要求电压相对比较严格，前置接口可能无法提供足够的电压，当然劣质的电源也可能会造成这个问题。解决方法是移动硬盘不要接在前置USB接口上，更换劣质低功率的电源或尽量使用外接电源的硬盘盒，假如有条件的话。 3.主板和系统的兼容性问题。呵呵这类故障中最著名的就是NF2主板与USB的兼容性问题。假如你是在NF2的主板上碰到这个问题的话，则可以先安装最新的nForce2专用USB2.0驱动和补丁、最新的主板补丁和操作系统补丁，还是不行的话尝试着刷新一下主板的BIOS一般都能解决。 4.系统或BIOS问题。当你在BIOS或操作系统中禁用了USB时就会发生USB设备无法在系统中识别。解决方法是开启与USB设备相关的选项。就是开机按F2或DEL键,进入BIOS,把enable usb device选择enable。 5.拔插要小心,读写时千万不可拔出,不然有可能烧毁芯片。XP中任务栏中多出USB设备的图标，打开该图标就会在列表中显示U盘设备，选择将该设备停用,然后你再拔出设备，这样会比较安全。 其实判断软件硬件问题很简单,在别的机器或换个系统(98下要驱动哦)试试就可以了.有些小的问题不妨先用专门软件 格式 pdf格式笔记格式下载页码格式下载公文格式下载简报格式下载 化下.还有提醒大家WINDOWS下格式化时要选择FAT,不要选FAT32。 U盘提示无法识别的USB设备维修 故障提示如图: 此故障大部份是U盘接口电路部份引起的。 1、首先换一根USB延长线或换个USB口，排除掉U盘之外的因素。 2、摇动U盘的插头，看是否有松动。 3、拆开U盘外壳，把USB接口的四个脚补焊一遍。 4、故障依旧。我们知道在数据线到主控之间有两个起保护作用的电阻(如下图)，用万用表测量其中的一个开路。 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel 5、从坏的主控板上拆下一个27欧的电阻换上，故障排除。 总结: U盘的故障一般都较容易修，应急情况也可以直接短接此电阻。 维修例二: 一Reidio牌128M的U盘插入电脑USB孔时提示无法识别的设备。此U盘为ChipsBank 方案 气瓶 现场处置方案 .pdf气瓶 现场处置方案 .doc见习基地管理方案.doc关于群访事件的化解方案建筑工地扬尘治理专项方案下载 。 备注:图中为导线焊上二极管临时代用，维修时应将三脚IC折下来，将二极管直接焊在电路板上。 有配件的人员应使用规格相同的稳压IC换上。 检修过程: 1、根据故障 分析 定性数据统计分析pdf销售业绩分析模板建筑结构震害分析销售进度分析表京东商城竞争战略分析 ，可以排除是软件的问题。 2、拆开U盘，首先看晶振、闪存等有无虚焊 3、用备用的12M晶振代换上，故障依旧 4、用万用表测USB接口的V，电压有5V正常 5、再测稳压IC的输入端5V也正常，测稳压IC的输出端只有1.3V，正常应该为3.3V左右 6、由于芯片没有发热现像，判断稳压IC损坏。 7、手头刚好没有这种稳压IC，应急用一个二极管并在三脚IC的输入端和输出端之间，如图。 8、故障排除。 无法识别的USB设备:Unknown USB Device. 很多人都遇到过的一个问题，所谓“无法识别”对于操作系统来说，或者是驱动程度有问题，或者是USB设备出现了问题，或者是计算机与USB设备连接出现了故障，解决问题的方法也是从这几处着手。 对于不同的设备会有不同的处理方法，了解USB设备正常工作需要的条件以及一些可能影响USB设备正常工作的因素，会有助于解决问题。 下面是保证USB设备可以正常工作的一些条件:(1)USB设备本身没有任何问题——可以通过在其它计算机上进行测试，保证能正常工作;(2)USB接口没有任何问题——可以通过连接其它的USB设备在此接口上进行测试;(3)USB设备的驱动程序已经正确安装，如果有详a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel 细说明书的USB设备，一定要仔细查看相应的说明文件，按照说明安装相应的驱动程序;Windows 2000以后的操作系统以识别大部分的USB设备，Windows 98以前的操作系统可以安装USB设备自带的驱动或者安装通用的USB设备驱动程序。 下面是可能影响USB设备正常工作的一些情形:(1)USB设备已经出现了故障(同样的条件以前可以正常使用，现在出现了问题);(2)USB接口有问题，比如a.USB前置接口极性接反， 接口电压不足，这可能导致USB设备烧毁，所以一定要仔细看一下主板说明书，防止接错;b.一些移动硬盘常会有这样的问题，主机后面的USB接口往往会比前置USB接口更可靠一些;c.主板与操作系统兼容性有问题，安装最新的主板驱动程序可以最大程度地避免此类问题;d.Bios中禁止了USB设备，可能通过更改BIOS中相应的设置来解决;e.操作系统问题，可以通过重装操作系统来解决;(3)USB驱动程序有问题:如果怀疑驱动有问题时，应当保证安装了该设备相应型号的最新驱动程序或确认操作系统不需要安装特别的驱动，最新的驱动可以通过从网上设备生产商的主页上去查找。 当USB设备出现问题时，除了根据实际的错误提示信息寻找解决方案以外，还要仔细查看USB设备的具体品牌、型号、生产商，在搜索结果时包括这些信息，可以更容易地找到对应的解决方法。 象有些插拔费劲需要经常处于连接状态的USB设备暂时出现故障，操作系统不停地出现“无法识别的USB设备”这样恼人的提示时，可以在设备管理器中暂时关闭通用串行总线控制器中相应的USB端口或者禁止相应的USB设备。 关于无法识别的usb设备 MP3不联机的原因可能有多种，我自己接触过很多种的MP3，大致归纳一下解决办法: 1。电脑设置 MP3插入后，就会在右下角弹出电脑正在尝试连接此USB设备的一些信息，有时就会弹出对话框让用户选择，有些用户还没看清就点了否，或者因为电脑一些初始的设置问题，禁止了USB的一些功能。 解决办法:右键点“我的电脑”，选“属性”--“硬件”--“驱动器签名”，在此选择“忽略”，点“确定”。然后重新插上MP3，还是不连的话，再右键点“我的电脑”--“属性”--“硬件”--“设备管理器”，从中找到“通用串行总线控制器”，右键，然后“扫描检测硬件改动”。 2。驱动程序问题 MP3光盘里往往会配“98驱动程序”、“升级工具”，在2000以上系统中，虽然理论上不需要安装也能联MP3，但往往安装过驱动后，能让联机变的更顺畅。所以试试安装这些工具，如果没有“98驱动”，就把“升级工具”安装一下(有些MP3的驱动集成在升级工具中)。 3。MP3本身的电压问题 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel 由于现在MP3的趋势是千方百计的降低成本，所以各公司不断采用新方案，新主控，新FLASH芯片，并不是说这些新东西就偷工减料了，问题在于这些新东西往往需要长期的调试才能达到最佳，但市场状况只能允许MP3工厂测试能在电脑的一个接口上联机就投产，所以常出现不联机、掉盘等现象。 这种情况下就需要用户多试几次，换插不同USB接口，单独再配一条质量好的USB线(一般越粗越好，铜的比铁的好)，然后保证MP3供电正常(用充电器把电充满再试)。 4。长期不使用后，出现的不联机 有些MP3长期不使用后，不能联机，甚至不能充电。主要是由于MP3未关闭电源，长期不用导致放电过度，达不到启动电压引起的。 解决办法是，把MP3连接到电脑或充电器上后，反复的拔/插USB接口和打开/关闭电源开关(ON/OFF键，如果没有就反复按PLAY键)。比如，插上USB接口后，关ON/OFF充2分钟，再开ON/OFF充2分钟，再拔下来重插，再充2分钟。这样做的目的是让MP3先少量充进一些电，达到启动电压。 5。如果这些方法仍然不能解决问题，基本能肯定MP3本身出现问题。此时，应该及时的进行返修或者退换，以免错过保修期。强烈反对用户自行拆机，MP3的种类比手机都多，而且往往需要原厂的程序重新升级，所以自行拆机大多导致不能享受免费服务。也不建议用户自行对MP3升级。 系统报错“无法识别的USB设备” 【故障现象】 使用U盘时电脑意外断电，重新开机后U盘无法正常使用，插上后系统就报错“无法识别的USB设备”。使用其他原来都能正常使用的USB接口设备，都会提示同样的错误信息。将USB设备插到电脑的其他USB接口上，都能正常工作。 【分析故障】 从现象上看，USB设备和主板的接口都没有损坏，怀疑是意外断电导致系统设置错误。 【问题处理】 从“控制面板”进入添加和删除硬件的窗口，将所有USB设备都删除，重新安装需要使用的USB设备驱动程序。重新启动电脑，U盘等USB设备插在原来的故障接口上能够正常工作。 无法识别的USB设备-笔记本硬盘故障 移动硬盘，插在前置USB接口，无法识别。 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel 这种情况，很大原因是供电问题。 由于USB硬盘在工作的时候也需要消耗一定的电能，如果直接通过USB接口来取电，很有可能出现供电不足。因此，几乎所有的移动硬盘都附带了单独的外接电源或者是通过键盘取电的PS2转接口，这时只要事先连接好外接电源或者通过PS2转接线与键盘连接好，确保给移动硬盘提供足够的电能之后再试试，这时应该可以正常使用了吧。需要特别提醒大家注意的是，建议使用移动硬盘之前都确保有足够的供电，否则很可能由于供电不足导致硬盘损坏。 对于从来没有使用过USB外接设备的朋友来说，即使正确安装了驱动程序也有可能出现系统无法检测USB硬盘的情况，这主要是由于主板默认的CMOS端口是关闭的，如果没有将其设置为开启状态，那么Windows自然无法检测到移动硬盘了。为了解决这个问题，我们可以重新开机，进入CMOS设置窗口，并且在 “PNP/PCI CONFIGURATION”栏目中将“Assign IRQ For USB”一项设置为“Enable”，这样系统就可以给USB端口分配可用的中断地址了。 还有可能是USB接口类型不符导致移动硬盘无法使用。比如计算机配置的USB接口是1.1 标准 excel标准偏差excel标准偏差函数exl标准差函数国标检验抽样标准表免费下载红头文件格式标准下载 的，而购买的移动硬盘是USB 2.0标准的接口，这就要求连接计算机和移动硬盘的连接线必须支持USB 2.0标准。因为高速移动设备插入低速集线器，该设备可能不被正常安装，而有些朋友在使用移动硬盘的同时还使用优盘，为了方便就直接使用优盘附送的USB 1.1标准连接线，这样就导致USB 2.0标准的移动硬盘无法正确识别。只要将连接线更换为USB 2.0标准的即可解决此故障。 a fine of 100 Yuan. 7.5.3 accident penalties (1) injuries fatalities directly punished 1~2 million. Direct responsibility for the accident and have the corresponding responsibility of leadership, such as concerning administrative sanctions, should be brought to the company or the relevant Department. (2) personal injury accident occurred, the direct punishment 0.5-10,000 yuan, responsible for the direct responsibility for the accident and the responsibility of leadership, such as concerning administrative sanctions should be dealt with by the personnel Department of the company. (3) personal injury accident occurs, the direct punishment 500-1000, who is directly responsible for the accident responsibility, give notice of criticism and 50-100 economic sanctions against them. (4) to conceal the accident, reported without undue delay or false, to inform the administrative leadership of the criticism, resulting in serious consequences, the pursuit of leadership, along with 500-1000 punishment. (5) significant near miss should be attempted as the case of responsible for the accident and construction team injuries accident penalty provisions, mutatis mutandis. Eight, should perform in the construction standards and specifications, serial number a 1 GB3323-2005 steel fusion welded butt joints, welding engineering-Ray lighting and quality rating of 2 GB11345-89 steel welds manual methods of ultrasonic inspection and testing results for grade 3 GB50236-2002 industrial pipe welding engineering code for construction and acceptance of field equipment 4 HGJ222-92 technical specification for welding of aluminium and its alloys 5 low temperature steel welding procedure 6 SH3525-2004 petrochemical JB/ T4708-2000 of welding procedure qualification for steel pressure vessels 7 JB/4709-2000 8 JB4730-2005 pressure vessel