Microza_UF_Modules_OLT

Ultrapure Water Filtration UF Modules Microza1 UF Modules OLT Series Description The Microza UF Modules, OT Series of ultrafiltration modules feature hollow fiber membranes having a uniformly smooth, tight skin on both the inside and outside of the fiber. • Designed specifically for ultra high purity DI water • Polysulfone membrane and housing • 6,000 and 10,000 molecular weight cut off ratings • External feed: Feed water flows from the outside to the inside of the hollow fiber. This flow path produces exceptionally clean water and eliminates stagnant areas on the permeate side • Large membrane area results in high flow rates per module • High temperature resistance: – 80°C / 176°F continuous operation – 90°C / 194°F hot water sanitization • High pressure modules available Applications The OT modules are recommended for high purity water systems where the TOC is less than 20 ppb and the particle counts in the feed are as shown in the table below. Feed Conditions Particle Maximum no. of Size particles/ml ≥ 0.1 µm 100 ≥ 0.2 µm 20 Connections • Feed/Reject: PVDF union sockets for these ports are available for thermal fusion to PVDF piping. • Permeate: Connections are 2" or 21⁄2" Tri-Clamp2 1 Microza is a trademark of Asahi Kasei Corporation 2 Tri-Clamp is a trademark of Triclover Inc. Data Sheet 78a Operating Parameters OLT-30263 OLT-5026 OLT-5026G OLT-6036H High High Pressure Pressure Performance MWCO daltons 10,000 10,000 10,000 6,000 Permeate flow4 m3/h 3.5 7.5 7.5 16 gpm 15.4 33 33 70 Dimensions Fiber inner/outer diameter mm 0.6/1.1 0.6/1.1 0.6/1.1 0.6/1.1 Membrane area m2 10.7 23 23 34 ft2 115 248 248 366 Module length mm 1,129 1,147 1,147 1,177 in 44.5 45.1 45.1 46.3 Module diameter5 mm 89 140 149 172 in 3.5 5.5 5.8 6.8 Operating Maximum inlet pressure bar 6 6 9 9 Conditions (30°C / 86°F)6 psi 90 90 130 130 Maximum differential bar 3 3 3 3 transmembrane pressure (50°C / 122°F) psi 45 45 45 45 Maximum operating °C 80 80 80 80 temperature6, 7 °F 176 176 176 176 Maximum sanitizing °C 90 90 90 90 temperature6, 7 °F 194 194 194 194 pH range 1-14 1-14 1-14 1-14 Materials • Membrane: Polysulfone • Housing: Polysulfone • Fiber bundle sleeve: Polyethylene • Guard: Polysulfone for OLT-6036H; polypropylene for the others • Potting material: Epoxy resin • Gasket: Viton8 • Antifreeze/bacteriostat: Glycerin/ethanol/DI water 3 Also available in a high pressure version. 4 Initial clean water permeate flow at 25°C / 77°C and 1 bar / 14.5 psi average transmembrane pressure. Please consult manual for general operating guidelines. 5 Nominal shell diameter excluding headers and permeate ports. 6 Pressure must be reduced at higher temperatures. See tables. 7 For operating temperatures > 80°C / 176°F, please contact Pall Microelectronics. 8 Viton is a trademark of DuPont Dow Elastomers. Unit conversion: 1 bar = 100 kilopascals continued on next page Operating Pressure vs Water Temperature The allowable operating pressure will vary with water temperature. See tables below. Part Number: OLT-6036H UF Feed Maximum Maximum Maximum Temperature °C / °F Transmembrane Pressure Feed Pressure Permeate Pressure 0-30 / 32-86 3 bar / 45 psi 9 bar / 130 psi 9 bar/130 psi 30-50 / 86-122 3 bar / 45 psi 8 bar / 120 psi 8 bar / 120 psi 50-70 / 122-158 2 bar / 30 psi 7 bar / 105 psi 7 bar / 105 psi 70-80 / 158-176 1.5 bar / 22 psi 6 bar / 90 psi 6 bar / 90 psi 80-90 / 176-194 1 bar / 15 psi 5 bar / 75 psi 5 bar / 75 psi Part Number: OLT-5026 UF Feed Maximum Maximum Maximum Temperature °C / °F Transmembrane Pressure Feed Pressure Permeate Pressure 0-30 / 32-86 3 bar / 45 psi 6 bar / 90 psi 6 bar / 90 psi 30-50 / 86-122 3 bar / 45 psi 5 bar / 75 psi 5 bar / 75 psi 50-70 / 122-158 2 bar / 30 psi 4 bar / 60 psi 4 bar / 60 psi 70-80 / 158-176 1.5 bar / 22 psi 3.5 bar / 50 psi 3.5 bar / 50 psi 80-90 / 176-194 1 bar / 15 psi 3 bar / 45 psi 3 bar / 45 psi Part Number: OLT-3026 UF Feed Maximum Maximum Maximum Temperature °C / °F Transmembrane Pressure Feed Pressure Permeate Pressure 0-50 / 32-122 3 bar / 45 psi 6 bar / 90 psi 6 bar / 90 psi 50-70 / 122-158 2 bar / 30 psi 3 bar / 45 psi 3 bar / 45 psi 70-90 / 158-194 1 bar / 15 psi 2 bar / 30 psi 2 bar / 30 psi Part Number: OLT-5026G UF Feed Maximum Maximum Maximum Temperature °C / °F Transmembrane Pressure Feed Pressure Permeate Pressure 0-30 / 32-86 3 bar / 45 psi 9 bar / 130 psi 9 bar / 130 psi 30-50 / 86-122 3 bar / 45 psi 7.5 bar / 110 psi 7.5 bar / 110 psi 50-70 / 122-158 2 bar / 30 psi 6.5 bar / 95 psi 6.5 bar / 95 psi 70-80 / 158-176 1.5 bar / 22 psi 6 bar / 90 psi 6 bar / 90 psi 80-90 / 176-194 1 bar / 15 psi 5.5 bar / 80 psi 5.5 bar / 80 psi Unit conversion: 1 bar = 100 kilopascals Part Numbers / Ordering Information Module Part Number Permeate Feed and Reject Length (L1) Length (L2) Length (L3) Connection Size Connection Size (in / mm) (in / mm) (in / mm) OLT-6036H 2 1⁄2" Tri-Clamp 63 mm O.D. 34.4 / 873 46.3 / 1177 9.8 / 250 OLT-5026G 2" Tri-Clamp 40 mm O.D. 35.6 / 903 45.1 / 1147 9.1 / 232 OLT-5026 2" Tri-Clamp 40 mm O.D. 35.6 / 903 45.1 / 1147 9.1 / 232 OLT-3026 2" Tri-Clamp 32 mm O.D. 38.8 / 985 44.5 / 1129 7.4 / 187 Spare Parts Description Material Module Spare Part Numbers OLT-6036H OLT-5026G OLT-5026 OLT-3026 Union Socket PVDF AUME-OT60H-31 AUME-OT50G-20 AUME-OT50-20 AUME-OT30-20 Cap Nut GF reinforced PPE AUME-OT60H-13b AUME-OT50G-139 AUME-OT50-2310 AUME-OT30-1310 Cap Nut GF reinforced PPE AUME-OT60H-13a – – –Retainer Ring Permeate Gasket Viton AUME-OT60H-17 AUME-OT50G-17 AUME-OT50-17 AUME-OT30-17 Feed/Reject O-Ring Viton AUME-OT60H-14 AUME-OT50G-14 AUME-OT50-14 AUME-OT30-14 Dummy Polysulfone AUME-OT60H-30 AUME-OT50G-30 AUME-OT50-30 AUME-OT30-30 9 304 SS with PFA coating 10 PVDF Unit conversion: 1 bar = 100 kilopascals Permeate Permeate Cap Nut L2 L1 L3 Gasket Union Socket Feed Reject Dimensions 2200 Northern Boulevard East Hills, New York 11548-1289 USA 1.800.360.7255 toll free (Only in US) 1.516.484.5400 phone 1.516.625.3610 fax Pall Corporation has offices and plants throughout the world in locations including: Argentina, Australia, Austria, Belgium, Brazil, Canada, China, France, Germany, Hong Kong, India, Indonesia, Ireland, Italy, Japan, Korea, Malaysia, Mexico, the Netherlands, New Zealand, Norway, Poland, Puerto Rico, Russia, Singapore, South Africa, Spain, Sweden, Switzerland, Taiwan, Thailand, United Kingdom, United States, and Venezuela. Distributors are located in all major industrial areas of the world. Visit us on the Web at www.pall.com/micro 78a © Copyright 2004, Pall Corporation. Pall, are trademarks of Pall Corporation. ® Indicates a Pall trademark registered in the USA. is a service mark of Pall Corporation.