Zebra 888-TT条形码打印机设置及使用方法Zebra 888-TT条形码打印机设置及使用方法
For Zebra Barcode Printer (Model: Zebra 888-TT)
1. On the PC, confirm the followings do not exist or remove them.
i、 All Zebra print queue
ii、 Zebra Designer Software and correlated print queue (named with “ZDesigner”)
iii、 All Z...
Zebra 888-TT条形码打印机设置及使用方法
For Zebra Barcode Printer (Model: Zebra 888-TT)
1. On the PC, confirm the followings do not exist or remove them.
i、 All Zebra print queue
ii、 Zebra Designer Software and correlated print queue (named with “ZDesigner”)
iii、 All Zebra printer driver from “Printer & Fax” > File > Server Properties
2. Connect the barcode printer to PC and power it off.
3. Hold Green Button and power on
4. Wait Red flash 5 times from the button and release it, Printer will then calibrate. 5. After calibration, power off the printer.
6. Install Zebra printer driver from installation disk.
7. After install, confirm the setting with open the Properties>General>Print Preference of the
print queue. Also check Properties>Advanced>Printing Defaults. (Refer to A, B below) 8. Install Zebra Designer Software. After install, run the software and install print queue
dedicated for zebra designer when it ask to.
9. After install the print queue, confirm the setting. (Refer to C below) 10. Calibrate the print with Zebra Designer Print Queue.
11. Set the print queue created in Step#9 with “Zebrabp” as share-name. (Refer to D below)
12. Label the printer if this is installation of new printer.
For CCLAS user
Print from local PC: Barcode LPT1 (EPL)
Print from remote PC: Barcode EC6 (EPL)
A. Setting for Properties>Advanced>Printing Defaults
B. Printing Preference ,Document / Option Configuration:
C. Printing Preference for Zebra Designer Print Queue
D. Share-name
本文档为【Zebra 888-TT条形码打印机设置及使用方法】，请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑，
图片更改请在作品中右键图片并更换，文字修改请直接点击文字进行修改，也可以新增和删除文档中的内容。
该文档来自用户分享，如有侵权行为请发邮件ishare@vip.sina.com联系网站客服，我们会及时删除。
[版权声明] 本站所有资料为用户分享产生，若发现您的权利被侵害，请联系客服邮件isharekefu@iask.cn，我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权，请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传，仅限个人学习分享使用，禁止用于任何广告和商用目的。
浙公网安备 33021202002483