Datasheet
Ver. 1.11
Copyright © 2004 by William,Inc.
UniFinger WFM1102-FC
UniFinger WFM1102-FC 3
Contents
1. Overview .......................................................................... 4
2. UniFinger WFM1102 Module................................................... 5
Table 1 UniFinger SFM3000 Modul le comb i n ati o ns..................................... 5
3. Features ........................................................................... 5
4. Fingerprint Authentication Specifications................................ 6
4.1. Fingerprint Authentication Performance.....................................6
4.2. Fingerprint Sensor Specifications..............................................6
5. Hardware Specifications ...................................................... 6
5.1. Operating range.....................................................................6
5.2. Absolute Maximum Ratings......................................................6
5.3. Electrical DC characteristics(VDD = 3.3Vdc, TOP = 25°C) ................6
5.4. Interface ..............................................................................7
5.5. Connector Specifications .........................................................7
5.5.1. J1 pin assignment ..................................................................... 7
5.5.2. J2 pin assignment ..................................................................... 8
5.6. Physical Dimensions ...............................................................8
Figure 1 Main module dimensions........................................................ 8
Figure 2 Sensor dimensions................................................................ 9
6. Communication Protocol Summary ....................................... 9
6.1. Packet Structure ....................................................................9
6.2. Command Summary.............................................................10
Datasheet Copyright © 2004 by William,Inc.
UniFinger WFM1102-FC 4
1. Overview
The UniFinger modules are stand-alone fingerprint systems ideal for
embedded system applications where biometric security is needed. The
modules are designed for manufacturers searching for an inexpensive,
reliable and easy-to-integrate biometric system. The UniFinger modules
provide complete fingerprint solutions by incorporating fingerprint sensor
interface and embedded fingerprint recognition algorithm into a half
business card sized module.
The UniFinger WFM1102 Module is the latest UniFinger module equipped with
world’s leading fingerprint authentication algorithm (ranked No. 1 in
FVC2004) and powerful DSP technology. Also, it supports wide range of
fingerprint sensor interoperability giving you a freedom to select suitable
sensor that most fits to your application. Furthermore, the fingerprint data
for enrollment and verification are compatible among different sensors,
even if they are based on different technologies. This feature of unification
presents application manufacturers and system integrators with much
more flexibility than ever before.
In addition to these features, the miniature sized UniFinger module has a
state-of-the-art low power design making it a perfect match in a wide
range of applications from battery operated mobile equipments to network
based security systems. The UniFinger stands ready to meet your
requirements and adapt to your applications.
Datasheet Copyright © 2004 by William,Inc.
UniFinger WFM1102-FC 5
2. UniFinger WFM1102 Module
The UniFinger SFM3000 series is the latest UniFinger module equipped with
world’s leading fingerprint authentication algorithm, which ranked No. 1 in
FVC2004. The WFM1102 module is base on powerful DSP technology,
optimized for performance while minimizing power consumptions.
Table 1 summarizes available combinations of modules and sensors.
3. Features
World best authentication performance (ranked No. 1 in FVC2004)
High speed fingerprint verification
Compact size
Low power consumption
Fast power on time
Supports various communication interfaces
Supports fingerprint data encryption
Supports various fingerprint sensors
Highly configurable I/O signals
Operates with a single 3.3v dc supply
Datasheet Copyright © 2004 by William,Inc.
UniFinger WFM1102-FC 6
4. Fingerprint Authentication Specifications
4.1. Fingerprint Authentication Performance
EER* <0.1%
Enrollment time <1 sec
Verification time <1 sec
*EER is dependent on databases
4.2. Fingerprint Sensor Specifications
Manufacturer Atmel
Device Name Fingerchip(AT77C101B-CB02)
Sensor technology Thermal, swiping type
Sensing area 14.0mm x 0.4mm
Image size(pixels) 360 x 500
Image resolution 500 dpi
5. Hardware Specifications
5.1. Operating range
Parameter Symbol Min Typ Max Units
Supply voltage VDD 3.0 3.3 3.6 V
Operating temperature TOP 0 70 °C
5.2. Absolute Maximum Ratings
Parameter Symbol Min. Max. Units
Power supply voltage VDD -0.3 3.6 V
Input voltage on signal pins VIN -0.3 3.6 V
5.3. Electrical DC characteristics(VDD = 3.3Vdc, TOP = 25°C)
Parameter Symbol Min. Typ. Max. Units
Supply current (idle) IDD1 50 mA
Supply current (scanning) IDD2 110 mA
Datasheet Copyright © 2004 by William,Inc.
UniFinger WFM1102-FC 7
Parameter Symbol Min. Typ. Max. Units
Supply current (identifying) IDD3 120 150 mA
High level input voltage VIH 2.0 3.6 V
Low level input voltage VIL -0.3 0.6 V
5.4. Interface
Type Description
UART 3.3V CMOS level
Baud rates up to 921.6kbps (factory default is 115.2kbps)
RS232/422/485 supported via additional level converter
Digital I/O 3.3V CMOS level
8 ports separately configurable
26bit Wiegand I/O supported via additional level converter
5.5. Connector Specifications
Connector Usage
J1 Host interface port I
J2 Host interface port II (Molex 53261-8090 compatible)
J3 Debug port for factory use only
J4 Sensor interface port, 20 pin FPC/FFC
5.5.1. J1 pin assignment
Name Pin number Functions
VSS 4,14 Power Ground
VDD 9 Power pin. 3.3Vdc
GPIO_0 ~
GPIO_7
5,6,7,8,1,2,3,
15
3.3V CMOS, bidirectional port
H_RXD 10 Receive Data, 5V tolerant 3.3V CMOS,
input only
H_TXD 11 Transmit Data, 3.3V CMOS, output only
Reserved 12, 13 Reserved for future use
Datasheet Copyright © 2004 by William,Inc.
UniFinger WFM1102-FC 8
5.5.2. J2 pin assignment
Name Pin number Functions
VDD 1, Power pin. Must be connected to 3.3vdc
Reserved 2, 3 Reserved for future use
VSS 4,7 Power Ground
H_RXD 5 Receive Data, 5V tolerant 3.3V CMOS,
input only
H_TXD 6 Transmit Data, 3.3V CMOS, output only
SHIELD 8 Ground Shield
5.6. Physical Dimensions
Parameter Values
Main board 55mm x 40mm x 8mm (WxLxH)
Sensor 26.6mm x 9.85mm
Figure 1 Main module dimensions
9.525
52.000
55.000
3.000
40
.0
00
3.000
3.
00
0
3.
00
0
3.000
9.525
3.
00
0
37
.0
00
38
.7
35
1.
27
0 3.000
2.540
pin 1
pin 1
Ø3.00
pin 1
Dimensions in millimeters
J3
J1
J2J4
Datasheet Copyright © 2004 by William,Inc.
UniFinger WFM1102-FC 9
Figure 2 Sensor dimensions
Image from Atmel Corporation.
6. Communication Protocol Summary
The UniFinger provides a proprietary communication protocol for easy
interface with most host systems. The protocol based on fixed sized
packets. Only fingerprint image, template data, and user lists are
transmitted as appended to the packet. Checksum functionality is
supported to ensure consistency of transmitted data.
Please refer to UniFinger Protocol Manual for detailed information.
6.1. Packet Structure
Start code Command Param Size Flag Checksum End code
1byte 1byte 4bytes 4bytes 1byte 1byte 1byte
Datasheet Copyright © 2004 by William,Inc.
UniFinger WFM1102-FC 10
6.2. Command Summary
Command Code Description
SW 0x01 System parameter write
SF 0x02 System parameter save
SR 0x03 System parameter read
SS 0x04 System status check
ES 0x05 Enroll by scan
EI 0x06 Enroll by image
ET 0x07 Enroll by template
VS 0x08 Verify by scan
VI 0x09 Verify by image
VT 0x10 Verify by template
VH 0x22 Verify host template by scan
IS 0x11 Identify by scan
II 0x12 Identify by image
IT 0x13 Identify by template
RI 0x20 Read image
RT 0x14 Read template
SI 0x15 Scan image
ST 0x21 Scan template
DT 0x16 Delete template
DA 0x17 Delete all templates
LT 0x18 List user ID
CT 0x19 Check user ID
FP 0x23 Fix all provisional templates
DP 0x24 Delete all provisional templates
KW 0x34 Encryption key write
KS 0x35 Scan template with challenge data
GR 0x36 Read GPIO configuration
GW 0x37 Write GPIO configuration
GC 0x38 Clear GPIO configuration
GD 0x39 Set default GPIO configuration
Datasheet Copyright © 2004 by William,Inc.
UniFinger WFM1102-FC 11
Contact Info
y Headquarters
Datasheet Copyright © 2004 by milliam, Inc.
William, Inc. ( http://william.cn )
Room 1806,Cangsong Industry Building
Tairan Industry District Shen Zhen.
Gongdong,China Postcode:518040
Tel: 86-755-61319902
Fax: 86-755-833849170
Email: jwong@william.com
Overview
UniFinger SFM3000 Series
Features
Fingerprint Authentication Specifications
Fingerprint Authentication Performance
Fingerprint Sensor Specifications
Hardware Specifications
Operating range
Absolute Maximum Ratings
Electrical DC characteristics\(VDD = 3.3Vdc, TOP
Interface
Connector Specifications
J1 pin assignment
J2 pin assignment
Physical Dimensions
Communication Protocol Summary
Packet Structure
Command Summary
本文档为【uf-wfm1102指纹模块】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑,
图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
该文档来自用户分享,如有侵权行为请发邮件ishare@vip.sina.com联系网站客服,我们会及时删除。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。