锐捷路由器命令

锐捷路由器命令 锐捷路由器命令大全 2007-09-07 21:08 出现攻击时掉线时请用console链接路由,保存好如下命令的相关内容,用以 分析 定性数据统计分析pdf销售业绩分析模板建筑结构震害分析销售进度分析表京东商城竞争战略分析 : 1、show ver (版本信息) 2、show run (配置信息) 3、show arp (arp信息) 4、show interface (端口信息) 5、show ip nat trans (nat信息) 6、show ip nat stat 7、show ip nat statistics per-user (只要第1屏的信息) 8、show ip cache (只要第1屏的信息) 9、show ip nat statistics suspicious-pc 发送免费arp: lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#int f 0/0(内网) lh(config)#arp gr int 1 lh(config)#int f 1/0(外网) lh(config)#arp gr int 1 lh(config)#end lh#wr端口映射: lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#ip nat source static tcp 192.168.3.99ip 80 219.128.102.110 80 permit-inside lh(config)#end lh#wr限制内网某机器不限速(192.168.2.80): lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#ip nat translation rate-limit iprange 192.168.2.2 192.168.2.79 inbound 500 outbound 1000 lh(config)#ip nat translation rate-limit iprange 192.168.2.81 192.168.3.253 inbound 500 outbound 1000 lh(config)#end lh#wr限制内网PC的链接线程数同限速: lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#ip nat translation per-user 0.0.0.0 250 lh(config)#ip nat translation rate-limit default inbound 500 outbound 1000 lh(config)#end lh#wr禁止公网访问IP lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#access-list 3199 deny icmp any any echo lh(config)#access-list 3199 deny tcp any any eq 135 lh(config)#access-list 3199 deny tcp any any eq 139 lh(config)#access-list 3199 deny udp any any eq netbios-ss -list 3199 deny tcp any any eq 445 lh(config)#access lh(config)#access-list 3199 deny tcp any host 219.128.102.110 eq www lh(config)#access-list 3199 permit ip any any lh(config)#end lh#wr禁止内网部分IP访问网关的 lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#webaccess-list 3198 deny tcp 192.168.2.1 192.168.2.100 host 192.168.3.254 eq www lh(config)#access-list 3198 permit ip any any lh(config)#end lh#wr禁止IP访问网络 lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#access-list 3001 deny ip host 202.96.128.166 any lh(config)#access-list 3001 permit any lh(config)#end lh#wr arp绑定 lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#arp 192.168.3.1 0011.5b71.2869 arpa lh(config)#end lh#wr 取消arp绑定: lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#no arp 192.168.3.1 lh(config)#end lh#wr 防范DDOS攻击 lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#security anti-wan-attack level high lh(config)#end lh#wr 防范sysflood攻击 lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#access-list 10 permit host 192.168.3.254 lh(config)#int f 0/0 lh(config)#rate-limit input access-group 10 64000 3000 3000 conform-action transmit exceed-action drop lh(config)#end lh#wr 禁止机器上网 lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#acl 99 deny 192.168.1.2 lh(config)#acc 99 deny 192.168.1.10 lh(config)#acc 99 per any lh(config)#end lh#wr 时间同步配置 lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#sntp enable lh(config)#sntp interval 60 lh(config)#sntp server 128.105.37.11 lh(config)#clock up lh(config)#end lh#wr SNMP配置 lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#snmp-server location ShunDe lh(config)#snmp-server host 192.168.2.252 version 2 mrtg lh(config)#snmp-server enable traps snmp authentication lh(config)#snmp-server community public ro lh(config)#end lh#wr 日志服务器配置 lh#conf t Enter configuration commands, one per line. End with CNTL/Z. lh(config)#logging 219.128.1.3 lh(config)#end lh#wr 现用配置 lh(config)#show run Building configuration...