target验厂评估
标准
excel标准偏差excel标准偏差函数exl标准差函数国标检验抽样标准表免费下载红头文件格式标准下载
Factory assessment requirements 工厂评估要求
1.
METAL CONTROL
金属物件管理
1-1. Needle, Sharp Objects/Points 针和利器
Sharp objects/points pose a cutting or piercing injury hazard to the wearer.
锐利的物体容易对穿着者产生切割或刺穿的风险。
Foreign bodies left in garments during manufacture can also pose a health risk.
同时也容易导致健康问题。
Known Objects:
已知的物品
• Broken sewing machine needles. 断针
• Hand sewing needles.
绣花针
• Pins or staples.
大头针或订书钉
• Safety pins.
安全别针
• Broken or burred edges on accessories. 断裂或者带刺的辅料
• Metal zips.
金属拉链
• Sharp points or edges on accessories. 带锐利点或者边的辅料
• Wired ribbon.
电缆
• Brooches.
胸针
1-2.Needle Control Procedure
针头管理流程
1-2-1.No sewing worker / operator shall be in possession of any needles other than those in the machine.
工人和操作人员不能拥有任何除机器上以外的针
1-2-2.All spare needles must be held by a supervisor in a secure, locked location with record of qty/type.
所有多余的针都必须由主管保管在安全、上锁的位置，并记录数量/种类。
1-2-3.Only the supervisor shall issue needles to operators.
只有主管才能发放针
-2-4.If a needle becomes blunt, the supervisor will issue a new needle and retain the old one 1
for safe disposal. Regular, planned replacement is recommended.
如果机器里的针变钝，主管才能发新针并要收回旧针合理丢弃。通常推荐丢在计划好的位置。
1-2-5.If a needle breaks, the parts must be looked for. When all are found, a new needle can be issued.
如果针头断裂，必须找回断裂部分。所有断裂部位找到以后才能发新针。
1-2-6.If all the parts cannot be found, the following procedure must be carried out 如果有些部位找不到，必须按照如下步骤进行
a
. Work being stitched, plus adjacent bundles, must be screened with a hand-held metal detector in a special area. A wooden table positioned away from the sewing line is recommended.
在已经做好的物品范围内，用手持检针机检验。推荐用木质桌来远离生产流水线。
b. Work must be carried to the special area in a box or plastic bag to prevent the needle fragment from falling onto the factory floor.
必须在特定的区域，用纸箱或者塑料袋来防止碎针落到地板上。
c
.A small magnet may be used to locate the needle fragment around the dewing machine 在缝纫机周围，可用小磁铁寻找断针部分
浙公网安备 33021202002483