1A Adjustable/Fixed Low Dropout Linear Regulator
- Low dropout voltage
- Load regulation: 0.2% typical
- Optimized for Low Voltage
- On-chip thermal limiting
- Standard SOT-223 and TO-252 packages
- Three-terminal adjustable or fixed low dropout
1.2V,1.5V,1.8V, 2.5V, 2.85V, 3.3V, 5V. Regulators
- Active SCSI terminators
- High efficiency linear regulators
- Post regulators for switching supplies
- Battery chargers
- 12V to 5V linear regulators
- Motherboard clock supplies
The AMS1117-ADJ and AMS1117-1.2,-1.5,-1.8,-2.5,-2.85,
-3.3 and-5 are low dropout three-terminal regulators with
1A output current capability. These devices have been
optimized for low voltage where transient response and
minimum input voltage are critical. The 2.85V version is
designed specifically to be used in Active Terminators for
SCSI bus.
On-chip thermal limiting provides protection against any
combination of overload and ambient temperatures that
would create excessive junction temperatures.
Unlike PNP type regulators where up to 10% of the output
current is wasted as quiescent current, the quiescent cur-
rent of the AMS1117 flows into the load, increasing effi-
ciency.
The AMS1117 series regulators are available in the indus-
try-standard SOT-223 and TO-252 power packages.
Key Features
Applications
General Description
Typical Application
Notice: The distance between Vout pin and Capacitor should not exceed 4cm for excellent performance
Figure 1. Typical Applications of AMS1117
Administrator
AMS1117
Administrator
Administrator
Advanced Monolithic Systems http://www.ams-semitech.com
Administrator
1
Administrator
1A Adjustable/Fixed Low Dropout Linear Regulator
Pin Assignments
*With package soldered to 0.5 square inch copper area over backside ground plane or internal power plane, ΘJA can vary from 30°C/W to
more than 50°C/W. Other mounting techniques may provide better thermal resistance than 30°C/W.
Absolute Maximum Ratings
Figure 2. Pin Assignments of AMS1117
Parameter Min. Max. Unit
VIN 18 V
(VIN – VOUT) * IOUT See Figure 3
Operating Junction Temperature Range -20 125 °C
Storage Temperature Range -65 150 °C
Lead Temperature (Soldering, 10 sec.) 300 °C
Administrator
AMS1117
Administrator
Advanced Monolithic Systems http://www.ams-semitech.com
Administrator
2
Administrator
1A Adjustable/Fixed Low Dropout Linear Regulator
Typicals and limits appearing in normal type apply for TJ=25℃.Limits appearing in Boldface type apply over the entire junction temperature for
operation, -20℃to 125℃.
Electrical Characteristic
Block Diagram
Thermal
Limit
Current
Limit
VOUT
VIN
Substrate
GND (fixed output)
ADJ. (adjustable output)
Figure 3. Block Diagram of AMS1117
Symbol Parameter Conditions
Min
(Note 2)
Typ
(Note 1)
Max
(Note 2) Units
VREF
Reference
Voltage
AMS1117
1.5V<=(VIN-VOUT)<=7V,10mA<=IOUT<=1A
1.225 1.250 1.275 V
VOUT Output Voltage
10mA<=
IOUT<=1A
IOUT = 10mA, VIN = 3.2V
AMS1117-1.2 ,2.7V<= VIN<=8.2V
1.176
1.152
1.200
1.200
1.224
1.248
V
AMS1117-1.5 ,3.0V<= VIN<=8.5V 1.470 1.500 1.530 V
AMS1117-1.8 ,3.3V<= VIN<=8.8V 1.764 1.800 1.836 V
AMS1117-2.5 ,4V<= VIN<= 9.5V 2.450 2.500 2.550 V
AMS1117-2.85 , 4.35V <= V IN<= 9.85V 2.793 2.850 2.907 V
AMS1117-3.3 , 4.8V<= VIN <=10.3V 3.234 3.300 3.366 V
AMS1117-5.0,6.5V<=VIN <= 12V 4.900 5.000 5.100 V
Administrator
AMS1117
Administrator
Advanced Monolithic Systems http://www.ams-semitech.com
Administrator
3
Administrator
1A Adjustable/Fixed Low Dropout Linear Regulator
Typicals and limits appearing in normal type apply for TJ=25℃.Limits appearing in Boldface type apply over the entire junction temperature for
operation, -20℃ to 125℃.
Electrical Characteristic (Continued)
Symbol Parameter Conditions Min (Note 2)
Typ
(Note 1)
Max
(Note 2) Units
△VOUT
Line Regultion
(Note 3) IOUT=10mA ,(VOUT+1.5V)<=VIN<=12V 0.035 0.2 %
Load Regultion
(Note 3)
VIN-VOUT=2V,10mA<= IOUT<=1A, 0.2 0.7 %
AMS1117-1.2
VIN-VOUT=2V,10mA<= IOUT<=1A,
0.2 1 %
VIN-VOUT Dropout Volage IOUT=1A,△VREF=1% 1.100 1.250 V
ILimit
Current Limit VIN-VOUT= 2V, TJ=25℃ 1.1 1.5 A
Minimum Load
Current (Note 4)
AMS1117-ADJ
1.5V<=(VIN-VOUT)<=10V
10 mA
Quiescent Curent VIN=VOUT+1.25V 5 13 mA
Thermal
Regulation
TA = 25°C, 30ms pulse 0.01 0.1 %/W
Ripple
Rejection
f=120Hz,VIN-VOUT=3V, VRipple=1VPP 60 72 dB
Adjust Pin Current 50 120 µA
Adjust Pin Current
Change
1.5V<=VIN-VOUT<=7V, 10mA<=IOUT<=1A 0.2 5 µA
Temperature
Stability
0.5 %
Long Term
Stability
TA = 125°C, 1000hrs. 0.3 %
Administrator
AMS1117
Administrator
Advanced Monolithic Systems http://www.ams-semitech.com
Administrator
4
Administrator
1A Adjustable/Fixed Low Dropout Linear Regulator
Note 1: Typical Values represent the most likely parametric norm.
Note 2: All limits are guaranteed by testing or statistical analysis.
Note 3: Load and line regulation are measured at constant junction room temperature.
Note 4: The minimum output current required to maintain regulation.
Typical Performance Characteristics
Typicals and limits appearing in normal type apply for TJ=25℃.Limits appearing in Boldface type apply over the entire junction temperature for
operation, -20℃to 125℃.
Electrical Characteristic (Continued)
Symbol Parameter Conditions
Min
(Note 2)
Typ
(Note 1)
Max
(Note 2) Units
ILimit
RMS Output Noise(% of
VOUT)
TA = 25°C, 10Hz<= f <=10kHz 0.003 %
Thermal Resistance, Junction
to Case
SOT-223 15 ℃/W
TO-252 3 ℃/W
Thermal Shutdown Junction Temperature 155 ℃
Thermal Shutdown Hysteresis 25 ℃
Output Current ( A )
0 0.2 0.4 0.6 0.8 1.0
1.5
1.4
1.3
1.2
1.0
0.9
0.8
0.7
0.6
0.5
0
D
ro
po
ut
V
ol
ta
ge
(
V
)
?
Figure 4. Dropout Voltage VS. Output Current
Administrator
AMS1117
Administrator
Advanced Monolithic Systems http://www.ams-semitech.com
Administrator
5
Administrator
1A Adjustable/Fixed Low Dropout Linear Regulator
Typical Performance Characteristics (Continued)
Figure 6. Output Voltage VS. Temperature
O
ut
pu
t V
ol
ta
ge
( V
)
?
3.70
3.65
3.60
3.55
3.50
3.45
3.40
3.35
3.30
3.25
3.20
Junction Temperature ( ℃ )
-75 –50 –25 0 25 50 75 100 125 150 175
Figure 5. Reference Voltage VS. Temperature
R
ef
er
en
ce
V
ol
ta
ge
( V
)
?
0.260
1.255
1.250
1.245
1.240
1.235
1.225
1.220
1.215
1.210
Junction Temperature ( ℃ )
-75 –50 –25 0 25 50 75 100 125 150 175
Figure 7. Minimum Load Current VS. Temperature
M
in
im
um
L
oa
d
C
ur
re
nt
( m
A
)
?
5
4
3
2
1
0
Junction Temperature ( ℃ )
-75 –50 –25 0 25 50 75 100 125 150 175
Figure 8. ADJ Pin Current VS. Temperature
A
D
J P
in
C
ur
re
nt
( µ
A
)
?
100
90
80
70
60
50
40
30
20
10
0
Junction Temperature ( ℃ )
-75 –50 –25 0 25 50 75 100 125 150 175
Note:
AMS1117 Only
Administrator
AMS1117
Administrator
Advanced Monolithic Systems http://www.ams-semitech.com
Administrator
6
Administrator
1A Adjustable/Fixed Low Dropout Linear Regulator
Mechanical Dimensions
4-Lead SOT-223 Package
Symbol
Inches Millimeters
Notes
Min. Max. Min. Max.
A Ñ .071 Ñ 1.80
A1 Ñ .181 Ñ 4.80
B .025 .033 .064 .840
c Ñ 0.90 Ñ 2.29
D .248 .264 6.30 6.71
E .130 .148 3.30 3.71
e .115 .124 2.95 3.15
F .033 .041 .840 1.04
H .264 .287 6.71 7.29
I .0121 Ñ .310 Ñ
J Ñ 10° Ñ 10°
K 10° 16° 10° 16°
L .0008 .0040 .0203 .1018
M 10° 16° 10° 16°
N .010 .014 .250 .360
Figure 9. 4-Lead SOT-223 Package
Administrator
AMS1117
Administrator
Advanced Monolithic Systems http://www.ams-semitech.com
Administrator
7
Administrator
1A Adjustable/Fixed Low Dropout Linear Regulator
Mechanical Dimensions (Continued)
3-Lead TO-252 Package
Notes:
1. Dimensions are exclusive of mold flash, metal burrs
or interlead protrusion.
2. Stand off-height is measured from lead tip with ref. to
Datum –B-.
3. Foot length is measured with ref. to Datum –A– with
lead surface.
4. Thermal pad contour optional within dimension b3
and L3.
5. Formed leads to be planar with respect to one another
at seating place –C-.
6. Dimensions and tolerances.
Symbol
Inches Millimeters
Notes
Min. Max. Min. Max.
A .086 .094 2.19 2.39
b .025 .035 0.64 0.89
b2 .030 .045 0.76 1.14
b3 .205 .215 5.12 5.46 4
c .018 .024 0.46 0.61
c2 .018 .023 0.46 0.58
D .210 .245 5.33 6.22 1
E .250 .265 6.35 6.73 1
e .090 BSC 2.29 BSC
H .370 .410 9.40 10.41
L .055 .070 1.40 1.78 3
L1 .108 REF 2.74 REF
L3 .035 .080 0.89 2.03 4
L4 .025 .040 0.64 1.02
Figure 10. 3-Lead TO-252 Package
111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111
Administrator
AMS1117
Administrator
Advanced Monolithic Systems http://www.ams-semitech.com
Administrator
8
Administrator
1A Adjustable/Fixed Low Dropout Linear Regulator
Advanced Monolithic Systems
http://www.ams-semitech.com
The " " logo is a registered trademark of Advanced Monolithic Systems.
All other company and product names are trademarks of their respective owners
Ordering Information
Package Temperature Range Part Number Output Voltage Packing Marking Transport Media
SOT-223
-20℃ - +125℃ AMS1117-1.2 1.2V AMS1117 1.2 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-1.5 1.5V AMS1117 1.5 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-1.8 1.8V AMS1117 1.8 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-2.5 2.5V AMS1117 2.5 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-2.85 2.85V AMS1117 2.8 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-3.3 3.3V AMS1117 3.3 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-5 5V AMS1117 5 2.5K Tape and Reel
-20℃ - +125℃ AMS1117 Adjust AMS1117 2.5K Tape and Reel
TO-252
-20℃ - +125℃ AMS1117-1.2 1.2V AMS1117 1.2 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-1.5 1.5V AMS1117 1.5 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-1.8 1.8V AMS1117 1.8 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-2.5 2.5V AMS1117 2.5 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-2.85 2.85V AMS1117 2.8 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-3.3 3.3V AMS1117 3.3 2.5K Tape and Reel
-20℃ - +125℃ AMS1117-5 5.0V AMS1117 5 2.5K Tape and Reel
-20℃ - +125℃ AMS1117CD Adjust AMS1117CD 2.5K Tape and Reel
Disclaimer:
• AMS reserves the right to make changes to the information herein for the improvement of the design and performance
without further notice! Customers should obtain the latest relevant information before placing orders and should verify
that such information is complete and current.
• All semiconductor products malfunction or fail with some probability under special conditions. When using AMS products
in system design or complete machine manufacturing, it is the responsibility of the buyer to comply with the safety
standards strictly and take essential measures to avoid situations in which a malfunction or failure of such AMS products
could cause loss of body injury or damage to property.
• AMS will supply the best possible product for customers!
Administrator
AMS1117
Administrator
Advanced Monolithic Systems http://www.ams-semitech.com
Administrator
9
Administrator
A.pdf
DESCRIPTION
FEATURES
APPLICATIONS
ORDERING INFORMATION (Temperature range: -40(C ~125(C)
BLOCK DIAGRAM
ABOSOLUTE MAXIMUM RATINGS
RECOMMENDED OPERATING CONDITIONS
ELECTRICAL CHARACTERISTICS (Tamb=25°C, unless otherwise specified. Limits appearing in Boldface type apply over the entire junction temperature range for operation, -40°C to 125°C. )
PIN CONFIGURATION
PIN DESCRIPTION
FUNCTION DESCRIPTION
TYPICAL APPLICATION CIRCUIT
TYPICAL CHARACTERISTICS CURVES
PACKAGE OUTLINE
PACKAGE OUTLINE
PACKAGE OUTLINE
Untitled
Untitled
Untitled
Untitled
Untitled
本文档为【LM1117-3.3】,请使用软件OFFICE或WPS软件打开。作品中的文字与图均可以修改和编辑,
图片更改请在作品中右键图片并更换,文字修改请直接点击文字进行修改,也可以新增和删除文档中的内容。
该文档来自用户分享,如有侵权行为请发邮件ishare@vip.sina.com联系网站客服,我们会及时删除。
[版权声明] 本站所有资料为用户分享产生,若发现您的权利被侵害,请联系客服邮件isharekefu@iask.cn,我们尽快处理。
本作品所展示的图片、画像、字体、音乐的版权可能需版权方额外授权,请谨慎使用。
网站提供的党政主题相关内容(国旗、国徽、党徽..)目的在于配合国家政策宣传,仅限个人学习分享使用,禁止用于任何广告和商用目的。